-=BabyBlade=-(CBR)

[Aalex82]

Originally posted by Prankster@March 22, 2007 04:33 pm

Oooo...

 

Cheemology for me...

 

But the melted part i saw was quite bad...

 

Maybe i go ask other shops when i free loh...

 

Thx for the info...

 

Or u wanna help me do it?

having attachment now..

rather busy..

unless u can wait for 4 months..

[ashzibit_69]

Originally posted by Prankster@March 22, 2007 09:09 am

Just went down yesterday to get my switch done.

 

In the end, say my dunno wat inside the switch melt already. Hafta change the whole switch which would cost me $85. Told him i dun wanna change. I dun find it making sense to change 2 switch in 1yr. Wtf?

 

So i guess i'll continue using my highbeam. So if i irritate any1 of u here wif my highbeam, dun blame me k. Use until the whole thing cannot use than change. Scarly by than, already change bike...

 

Had the same problem. But I asked my mech to just use the low beam and remove the connection for the high beam. He did for me FOC cos simple job. But he also advised me that its better to redo the whole wiring cos my bike (FM plate) cosidered quite old liao. I told him to wait and see cos he also not sure how much it will cost.

 

Issit worth it or even necessary? Any comments or advised is appreciated. Thanks

[Aprilia6969]

Any CBR 4 To COI. Please Pm ME Cheers..

[keratinize]

CBR400RR rocks.

one of my best bikes ever.

[RoMMiE aka SdRaWkCaB]

yo honam...i didnt post many times...dat day my lappy keep hangin...so maybe i press twice to post..accidentally though...anyway...u noe me or not???haha...im the insurance guy la..haha...stay away from me...LOL..by the way...ill b collectin my CBR400RR L model next week...decided to get L rather den N model...hahaha...so...all u CBRians wanna meet up sum day discuss our bike problems??haha...havent collected mine...so aint sure wats the problem gonna be...

[Tronicans]

Originally posted by RoMMiE@March 23, 2007 08:40 am

yo honam...i didnt post many times...dat day my lappy keep hangin...so maybe i press twice to post..accidentally though...anyway...u noe me or not???haha...im the insurance guy la..haha...stay away from me...LOL..by the way...ill b collectin my CBR400RR L model next week...decided to get L rather den N model...hahaha...so...all u CBRians wanna meet up sum day discuss our bike problems??haha...havent collected mine...so aint sure wats the problem gonna be...

 

 

Good Choice...

Hopefully minor probs or NO probs at all...

 

Y L model instead or others?

 

Any particular reason?

[genyue]

Originally posted by Tronicans@March 23, 2007 10:27 am

 

Good Choice...

Hopefully minor probs or NO probs at all...

 

Y L model instead or others?

 

Any particular reason?

Fast

[Prankster]

Originally posted by Aalex82@March 22, 2007 06:28 pm

having attachment now..

rather busy..

unless u can wait for 4 months..

Hmmm...

 

Okie loh...

 

4 months later u contact me...

 

See whethere i change bike already anot...

 

Hopefully yes...

 

Haha... Den u can come and settle my new bike probs(intending to get 2nd hand lah)... Whahaha...

 

 

[Prankster]

Originally posted by DeathInc2004@March 22, 2007 07:24 pm

Had the same problem. But I asked my mech to just use the low beam and remove the connection for the high beam. He did for me FOC cos simple job. But he also advised me that its better to redo the whole wiring cos my bike (FM plate) cosidered quite old liao. I told him to wait and see cos he also not sure how much it will cost.

 

Issit worth it or even necessary? Any comments or advised is appreciated. Thanks

Wow. Good idea, just use the low beam oni. I nv think of that man.

 

Bro, than hor, i suggest lah, from my own point of view, i think that the re-wiring not neccessary lah, provided u intending to use the bike for long lah... If u think of changin to class2 in 1 or 2 yrs, den i think u save the money up better... Coz i think its quite ex...

 

My friend last time ride RVF, he go and ask how much to do re-wiring, if i remember correctly rite, it around $800-$1000 like that... Whole bike to re-wire...

Damn ex man...

 

Actually, i tot of it too, but lucky i nv go and do it, coz now i trying to plan for class2... Oni no time to go register and take practical, coz of work reasons...

 

Btw, ask u all ah, issit an offence to ride using the high beam?? And will it affect my bike's battery or anythin??

[honam24]

Originally posted by ImPeRzA@March 21, 2007 11:03 pm

Wah lao eh. yandao kia haha u already willing to waste time with me le. wat more can i still ask haha. At least u there with me mah. By the way nice to knw u too haha. free or anything give me a call bah.

 

guess the prob is solved le bah. guess juz haf to change the starter relay liek wat chong said.

Anywae nothing to do at home also..

 

[honam24]

Originally posted by hafiz84@March 22, 2007 12:16 am

'GF' sounds diff leh..

ahaha...

 

weekend..

ermm, im free on monday n sunday leh..

 

how ah..?

 

 

Mm.. Most shops dun open on Sundae. Mondae? Mm.... you called me again lo. should be able to make it.

[honam24]

Originally posted by RoMMiE@March 23, 2007 08:40 am

yo honam...i didnt post many times...dat day my lappy keep hangin...so maybe i press twice to post..accidentally though...anyway...u noe me or not???haha...im the insurance guy la..haha...stay away from me...LOL..by the way...ill b collectin my CBR400RR L model next week...decided to get L rather den N model...hahaha...so...all u CBRians wanna meet up sum day discuss our bike problems??haha...havent collected mine...so aint sure wats the problem gonna be...

Oh.. i see. No wonder. I keep thinking whether this nick and the guy whom i juz know is it 'Interlink' or not.

 

Of course i rem you la. Btw the FF juz sold for $50.

 

[Tronicans]

Originally posted by DeathInc2004@March 22, 2007 07:24 pm

Had the same problem. But I asked my mech to just use the low beam and remove the connection for the high beam. He did for me FOC cos simple job. But he also advised me that its better to redo the whole wiring cos my bike (FM plate) cosidered quite old liao. I told him to wait and see cos he also not sure how much it will cost.

 

Issit worth it or even necessary? Any comments or advised is appreciated. Thanks

Redoing the full wiring harness is a good thingy... BUT a costly one though.

If you plan to keep the machine for long term then its worth the money and time spent doing up the wiring, You wil not regret in future. If not you are jus helping the next owner of your bike on that part of the money needed to be put on the bike.

 

Once wiring is done, the bike's current supply will run more smoothly since wires are new without any wiring CUT that has a bit of current loss.

 

Your headlights be much brighter, horns more louder... As though you have jus installed grounding and volt stabiliser!

 

Current and voltage supply to your CDI and Rectifier wil be stronger with new wires without any cuts and pasting here and there ensuring the flow.

 

Standard Wiring harness/loom has wires to CDI, Alternater, Rectifier, battery, headlights, Fusebox complete with new and spare fuse.

 

Things it does not come with :: Left hand switch connection. Low/High beam and horn($85), Right hand switch connection. Engine kill switch, Start switch($60). Ignition wires. Spark plug coil and the wire($85*2=$170). And of cos charging magneto coil.($270)

 

On average most shops charge between $280 to $320.... If higher or lower must ask wat it comes with specifically. In my opinion i had rewired a yr back. Solved all the blades wiring probs.

[RoMMiE aka SdRaWkCaB]

Originally posted by Tronicans@March 23, 2007 10:27 am

 

Good Choice...

Hopefully minor probs or NO probs at all...

 

Y L model instead or others?

 

Any particular reason?

cos ive owned dat model b4..and have travelled to Kelantan twice wif no problem at all...and oso...L model have no power cut~!!!!hahaha....

[RoMMiE aka SdRaWkCaB]

Originally posted by honam24@March 23, 2007 07:06 pm

Oh.. i see. No wonder. I keep thinking whether this nick and the guy whom i juz know is it 'Interlink' or not.

 

Of course i rem you la. Btw the FF juz sold for $50.

 

haha...yah i noe...i saw at garage sale u posted sold already..anyway...next week my bike will be out...so maybe can go dam and meet up yah~!!!

[ImPeRzA]

CAreful hor homan. later she sue u then u knw. Copyright!!

[honam24]

Originally posted by RoMMiE@March 23, 2007 10:38 pm

haha...yah i noe...i saw at garage sale u posted sold already..anyway...next week my bike will be out...so maybe can go dam and meet up yah~!!!

Yup yup.. No pro.

 

[honam24]

Originally posted by ImPeRzA@March 23, 2007 11:31 pm

CAreful hor homan. later she sue u then u knw. Copyright!!

I now trying to woo her ma..

 

haa!!!

[RedGixxer688]

Things it does not come with :: Left hand switch connection. Low/High beam and horn($85), Right hand switch connection. Engine kill switch, Start switch($60). Ignition wires. Spark plug coil and the wire($85*2=$170). And of cos charging magneto coil.($270)

 

On average most shops charge between $280 to $320.... If higher or lower must ask wat it comes with specifically. In my opinion i had rewired a yr back. Solved all the blades wiring probs.

 

So let me get this rite .... the FINAL cost will be 280-320 (for rewiring) + all the other costs that you listed?

 

 

So bro Death .... u still gonna do it?

[kram]

Originally posted by genyue@March 23, 2007 01:13 pm

Fast

ghost

[wantonmee07]

Originally posted by DeathInc2004@March 22, 2007 07:24 pm

Had the same problem. But I asked my mech to just use the low beam and remove the connection for the high beam. He did for me FOC cos simple job. But he also advised me that its better to redo the whole wiring cos my bike (FM plate) cosidered quite old liao. I told him to wait and see cos he also not sure how much it will cost.

 

Issit worth it or even necessary? Any comments or advised is appreciated. Thanks

FM 9*** H?

[Tronicans]

Originally posted by metasis9705@March 24, 2007 12:22 am

So let me get this rite .... the FINAL cost will be 280-320 (for rewiring) + all the other costs that you listed?

 

 

So bro Death .... u still gonna do it?

NOPE... jus the wire loom is alr around $300.. the rest haven add in...

 

if add in can touch $600 at least!

[ashzibit_69]

Originally posted by wantonmee07@March 24, 2007 03:32 am

FM 9*** H?

You referring to my bike? Its FM but not the one you are thinking of.

[ashzibit_69]

Originally posted by Tronicans@March 24, 2007 08:18 am

NOPE... jus the wire loom is alr around $300.. the rest haven add in...

 

if add in can touch $600 at least!

But like you said, the benefit is long term. Plus I dun intend to change to a bigger bike .. not in the next 2-3 years anyway.

[honam24]

Originally posted by wantonmee07@March 24, 2007 03:32 am

FM 9*** H?

Bro you know rite, my friend bought over ur bike..