[Discussion] Super Four General Enquiry Thread

[safshadows]

Good day gents, any idea if there is any local website or services that sells bike maintainence stuffs like chain lube and etc online? and they are able to mail it to us i suppose.

[justforme]

Is there any recommended shop for a paint job? Price around?

 

you can look around the advertisers section. i think HLC has the lowest price but not sure about quality since i have never done any paint job on my bike before.

 

Good day gents, any idea if there is any local website or services that sells bike maintainence stuffs like chain lube and etc online? and they are able to mail it to us i suppose.

 

i have not bought any bike stuff online before but from what i know unique do have online orders and delivery.

[PrinceLuh]

I am having problem with my spec 1. First gear is making rattling noise but only when starting to move off or just rolling at 5km to 10km or till rpm 3 the noise goes away at higher revs,speed or change up. The engine is very strong and it definatly not the issue. It sounds like the noise you hear from a dry bareing (klak-klak-klak)when it's being spun, and neither noise is present when running in stationary in gear or not or in nutral and reving. Any help would be frekin awsum

 

Note: have checked the chain, chain tension, and both sprockets all seem good chain is new, sprockets good as no ware, or hook not sharp, also no play in rims either!..***

[SimpleRider]

I am having problem with my spec 1. First gear is making rattling noise but only when starting to move off or just rolling at 5km to 10km or till rpm 3 the noise goes away at higher revs,speed or change up. The engine is very strong and it definatly not the issue. It sounds like the noise you hear from a dry bareing (klak-klak-klak)when it's being spun, and neither noise is present when running in stationary in gear or not or in nutral and reving. Any help would be frekin awsum

 

Note: have checked the chain, chain tension, and both sprockets all seem good chain is new, sprockets good as no ware, or hook not sharp, also no play in rims either!..***

 

Hi PrinceLuh,

my guess is:

1) its time to change your chain & sprocket, or

2) its your wheel bearing that needs changing

but since you've already ruled that out,

based on your symptoms -> it reckon its your timing chain, maybe? cos that was what happened to my previous varadero 125.

btw, since when did these problems start? or did you just bought the bike?

 

 

just my $0.02

[SimpleRider]

I am having problem with my spec 1. First gear is making rattling noise but only when starting to move off or just rolling at 5km to 10km or till rpm 3 the noise goes away at higher revs,speed or change up. The engine is very strong and it definatly not the issue. It sounds like the noise you hear from a dry bareing (klak-klak-klak)when it's being spun, and neither noise is present when running in stationary in gear or not or in nutral and reving. Any help would be frekin awsum

 

Note: have checked the chain, chain tension, and both sprockets all seem good chain is new, sprockets good as no ware, or hook not sharp, also no play in rims either!..***

 

Hi PrinceLuh,

my guess is:

1) its time to change your chain & sprocket, or

2) its your wheel bearing that needs changing

but since you've already ruled that out,

based on your symptoms -> it reckon its your timing chain, maybe? cos that was what happened to my previous varadero 125.

btw, since when did these problems start? or did you just bought the bike?

 

 

just my $0.02

[danial_28]

Hi guys, need ur help on something.

My Spec 3 is creating some problems and im not sure y.

Usually after warming up my bike, i will ride off like normal.

However the first few minutes of riding is creating problems.

Firstly, my speedometer will turn to 0 while still moving.

My Vtec will not open while the speedometer is 0.

However after sometime, the speedometer will switch back to the current speed

and everthing else will work fine then.

I am not sure what is the cause.

Maybe sumone here will be able to tell me.

Thanks in advance bros.

[justforme]

Hi guys, need ur help on something.

My Spec 3 is creating some problems and im not sure y.

Usually after warming up my bike, i will ride off like normal.

However the first few minutes of riding is creating problems.

Firstly, my speedometer will turn to 0 while still moving.

My Vtec will not open while the speedometer is 0.

However after sometime, the speedometer will switch back to the current speed

and everthing else will work fine then.

I am not sure what is the cause.

Maybe sumone here will be able to tell me.

Thanks in advance bros.

 

probably the wire for the meter is loose.

if you are hands-on enough you can just open up the headlight.

check the huge connector that is from the meter into the headlight for any loose wiring or loose connector.

 

if there is no problem then you can be even more adventurous.

open up the meter back cover. (to do this you have to remove the headlight and the headlight bracket first)

once u open up u can take a look see if there is any loose/dangling wire on the speedometer side.

 

i'm not sure where is the speed sensor, if anyone know where it is can probably give some advice.

[BrOkEn]

Hey guys!

 

I'm looking to get a S4 and would like to seek some advice please.

 

What's the rough prices and age range that we're looking at for Spec2, Spec3 & Revo? What about the pros/cons?

 

Not really looking for anything fancy as this will be a utility bike for daily transportation use.

 

Thanks!

[HaiR1]

Do read up the pages here for pros n cons

[darkforce]

Hi,

 

I'm having problem in posting new thread in bike sale section, is there a limitation to post in that sub forum ???

 

Thank you in advance.

 

:cry:

[BrOkEn]

Do read up the pages here for pros n cons

 

Hey HaiR1,

 

Thanks for the reply! Can you help to point me to the right threads to read please?

 

Thanks!

[ki113r]

Hey HaiR1,

 

Thanks for the reply! Can you help to point me to the right threads to read please?

 

Thanks!

 

Lol so hard to search meh?

 

http://www.singaporebikes.com/forums/showthread.php/346588-FAQ-and-Information-about-Honda-CB400-Revo-NC42

[SimpleRider]

Hi,

 

I'm having problem in posting new thread in bike sale section, is there a limitation to post in that sub forum ???

 

Thank you in advance.

 

:cry:

 

Bro darkforce,

It is because you haven't clock the minimium post count to be able to post on the Sale Section.

Kindly check the FAQs?

 

 

Just my $0.02

[jayz]

eh u guys got up gear clutchlessly?

Edited October 12, 2013 by jayz

[jerryGSR]

Hi Guys,

 

I haf stop riding since i started driving at 2007. But now cars haf sky rocketed. I haf to get back to riding for work.

 

May I know the OTR price for Super 4 Revo? I see prices online ranges from Global Motor at $11.5K to Excel Motor at $13.5K.

 

And wats the insurance premium like? I am 34 year old, married.

 

Please advise.

[badd89]

Hie guys..was wondering if any of u had change ur time chain tensioner b4..would like to knoe the cost of it and where u guys did it..tq

[foccacia]

eh u guys got up gear clutchlessly?

 

what is clutchlessly?

[ticks]

what is clutchlessly?

 

Meanings up shift without clutch after first gear. Can be done. Much nicer shifts also.

[foccacia]

Meanings up shift without clutch after first gear. Can be done. Much nicer shifts also.

 

almost like automatic but no fun rite?

[ticks]

almost like automatic but no fun rite?

 

U try and see whether its fun when u get it right lo.. Hehe. It will jerk if u get the timing wrong.

[foccacia]

U try and see whether its fun when u get it right lo.. Hehe. It will jerk if u get the timing wrong.

 

But how to do clutchlessly n how much?

 

 

Sent from my iPhone using Tapatalk

[ticks]

First gear definitely u need clutch. Only can do first to second gear upwards. Under mid-high acceleration, when you're about to change gear, preload the shift lever(put your toe under the lever and push slightly up), then when you normally release the throttle all the way, don't release it all, just back it off slightly and up shift completely. You'll notice that the gap between gear reduces and gear changes are much smoother. Have a go at it. Hehe.

[syeDsTp]

I've tried that b4 and its fast acceleration. But is it safe to do on our bikes? Don't have quick shifter lol

 

Sent from my GT-N7000 using Tapatalk

[foccacia]

First gear definitely u need clutch. Only can do first to second gear upwards. Under mid-high acceleration, when you're about to change gear, preload the shift lever(put your toe under the lever and push slightly up), then when you normally release the throttle all the way, don't release it all, just back it off slightly and up shift completely. You'll notice that the gap between gear reduces and gear changes are much smoother. Have a go at it. Hehe.

 

U mean it is not an additional technology to install on the bike? Just an method to sort of trick the bike to do automatic gear changing?

 

 

Sent from my iPhone using Tapatalk

[ticks]

U want technology then install quick shifter lo. Hehe. Those for racing bikes wan.