[Group] Yamaha FZ6/Fazer 600

[Yatz86]

my IU died on me yesterday. thought gahment was sucking too much of my money.

 

Turns out the IU fuse holder was rusty liao.

[pichudot]

my IU died on me yesterday. thought gahment was sucking too much of my money.

 

Turns out the IU fuse holder was rusty liao.

 

the stock fuse holder sucks! go buy a new one...

also, u also had to check that area u placed the fuse for water entry possibilities...

it's near to the battery if i'm not wrong on yours and had to take care...

moreover you are parking in a open air carpark, had to take care more...

[recko]

my IU died on me yesterday. thought gahment was sucking too much of my money.

 

Turns out the IU fuse holder was rusty liao.

 

Same fate as mine :

I had bad experience with the new IU before. Before I went for my 1 week holiday last year, I washed my bike and left it there for a week. The day I returned and went into the gantry, I realised my IU wasn't working at all. Immediately the next morning I went to Vicom for IU inspection.

 

The mechanic found out that it was my IU's fuse that rusted and a layer of rust formed up that blocks the current from flowing through. He then told me that the cable and the fuse holder of the new ones are lousier than any other older models.

 

Mine was later changed to a car's fuse holder instead where water cannot get in, this is what he said, I'm not sure... haha... That's my IU story...

[Quincy]

anyone knows where i can download the service manual for free from?

 

FZ6 service manual?

[pichudot]

FZ6 service manual?

 

yes bro... but i got it from gohkm bro liao...

but realized that it's for 04' model... i'm curious if it fits 08' model or not...

[gohkm]

yes bro... but i got it from gohkm bro liao...

but realized that it's for 04' model... i'm curious if it fits 08' model or not...

 

hi charles, never know the service manual for fz6 is 2004..

 

heres the updated 1.....

[pichudot]

hi charles, never know the service manual for fz6 is 2004..

 

heres the updated 1.....

 

thanks a lot bro... i'll download it tonight from home...

eh? how u know i'm Charles?

[gohkm]

thanks a lot bro... i'll download it tonight from home...

eh? how u know i'm Charles?

 

well. pichudot's real name is every where in the fazer thread....

[pichudot]

well. pichudot's real name is every where in the fazer thread....

 

o izit? ok la i'm cool with my name all over the shop de la...

it's a open concept kinda in here anyway... no hussy wussy secrets in here...

[y0s_bikey]

anyone knows where i can download the service manual for free from?

 

so have u got it? If you needs it let me know i have the soft copy as well in my com.

[pichudot]

so have u got it? If you needs it let me know i have the soft copy as well in my com.

 

ops! i haven download it...

last night too tired after that 1 round of run we did and 10 chin ups...

[rhema83]

dear folks!

 

if you're using the scott oiler be it v-system or the latest e-system , perhaps you may be interested to read this...

 

you may wish to take note or perform periodically checks of your scott oiler oiling dispenser nozzle when you reversing your bike or clean your chain or applying manual lubrication to your chain with cloth dap with EO...

 

sometimes while doing this, the nozzle might be pushed out of place and hence it may dangle with the sprocket and thus by reversing your bike, the nozzle might be damaged...

 

look how my nozzle got damaged and how it looks after i pulled it out from the sprocket hole (is that called hole?), the alignment of the nozzle also came out of place from the chain...

 

http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs327.snc3/28976_399373647839_531827839_4123517_6804543_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs327.snc3/28976_399373692839_531827839_4123522_4881977_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs307.snc3/28976_399373662839_531827839_4123519_7618819_n.jpg

 

this is how it looks like when i cut the damaged tube out...

 

http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs307.snc3/28976_399373757839_531827839_4123533_8307225_n.jpg

 

placing a new nozzle back and re-align it back nicely...

 

remember not to tie the oil tube too tightly against your rear axle as this will restrict the oil flow...

 

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs336.ash1/28976_399373767839_531827839_4123534_4816529_n.jpg

 

my suggestion when placing the nozzle against your sprocket, try to align it in the middle between your chain to the edge of your sprocket...

 

also, make sure that the nozzle is touching your sprocket so that oil can directly flow onto your sprocket and downwards to your chain o-rings...

 

you will notice that the nozzle tip is kinda look like it's aligned to your chain...

 

http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs307.snc3/28976_399373772839_531827839_4123535_2305611_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs327.snc3/28976_399373782839_531827839_4123536_1674541_n.jpg

 

a little suggestion here for those folks who had their oil tube tied to the rear shock...

 

please DO NOT allow your oil tube or DO NOT allow the mechanic to install it this way because if you happen to have heavy activity going on at your rear shock, you may damage your oil tube too...

 

you can advice your mechanic to tie it to your frame but make sure it's not tightly tied...

 

notice how far is the distance of my oil tube away from the rear shock...

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs307.snc3/28976_399373752839_531827839_4123532_5745863_n.jpg

 

notice i tie it at my frame...

 

http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs307.snc3/28976_399373702839_531827839_4123524_4538065_n.jpg

 

and of cus, tie it loosely...

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs327.snc3/28976_399373712839_531827839_4123526_6880958_n.jpg

 

that's all folks... my 2 cents... hope u like my write up and pardon me for bad english...

 

Thanks for the tips! I checked my bike and realised that the nozzle is not touching the sprocket, and I wonder what the oil has been lubricating. But one problem is, it is still possible for the nozzle to get caught by the chain when reversing. Got to be careful and check often.

[pichudot]

Thanks for the tips! I checked my bike and realised that the nozzle is not touching the sprocket, and I wonder what the oil has been lubricating. But one problem is, it is still possible for the nozzle to get caught by the chain when reversing. Got to be careful and check often.

 

yeah that is one point have to take note if your nozzle is too near the chain...

[y0s_bikey]

ops! i haven download it...

last night too tired after that 1 round of run we did and 10 chin ups...

 

haha, if u need it jus let me know la. how was ur trip? i simply love the gerik highway view... too bad i missed it...

[pichudot]

haha, if u need it jus let me know la. how was ur trip? i simply love the gerik highway view... too bad i missed it...

 

nice and enjoyable and very memorable...

u should go lo bro... i bet it's more fun compared to redang...

[y0s_bikey]

haha

nevermind, soon i believe... I need to give my bank so rest... recently have been depleting it with all the new stuffs i got...

[dragonforce]

haha

nevermind, soon i believe... I need to give my bank so rest... recently have been depleting it with all the new stuffs i got...

ready for track soon?

[y0s_bikey]

haha I haven't fix up my new add on... by the way u received your rear set? post some photos up? I'm planning for that in the next...

[dragonforce]

haha I haven't fix up my new add on... by the way u received your rear set? post some photos up? I'm planning for that in the next...

i 'heard' about your new add on.. very crucial mod if want to go track yeah.. yup they are installed.. remember to take out your main stand before you go track.. got chance then meet up.. i try not to post pictures of my bike in forums..

[y0s_bikey]

actually i think our main stand not really very low...

should be ok ba... don't think need to take out.. never scrapped them before at most scrap my rear set pin... and my tyres are almost edge already... think if i managed to scrap the main stand then most probably i will be scrapping the ground already... hehe won't be pushing so hard also...

Edited June 3, 2010 by y0s_bikey

[y0s_bikey]

Anyone interested in this Puig lever??? Looks nice lei... I check for the price pretty cheap also... haha

[dragonforce]

actually i think our main stand not really very low...

should be ok ba... don't think need to take out.. never scrapped them before at most scrap my rear set pin... and my tyres are almost edge already... think if i managed to scrap the main stand then most probably i will be scrapping the ground already... hehe won't be pushing so hard also...

 

hmm.. not so sure about that.. i managed to scrap front part of my sidestand.. now that area rusted..

 

Anyone interested in this Puig lever??? Looks nice lei... I check for the price pretty cheap also... haha

 

wow! can fit on brembo rcs? if can i am definitely interested! didnt realise puig have gear indicators too! shall go home and see the instruction video if its plug and play. prefer to get those plug and play kind of gear indicators, apart from gipro, any others that are plug and play?

[y0s_bikey]

hmm.. not so sure about that.. i managed to scrap front part of my sidestand.. now that area rusted..

 

Wah u hardcore racer la... I'm only a newbie...

 

wow! can fit on brembo rcs? if can i am definitely interested! didnt realise puig have gear indicators too! shall go home and see the instruction video if its plug and play. prefer to get those plug and play kind of gear indicators, apart from gipro, any others that are plug and play?

 

I not sure if can fit the brembo rcs anot... i try to check with them and let u know again. I'm using Gipro X too! Great item! from the vid seems like cutting of wires are needed...

Edited June 3, 2010 by y0s_bikey

[dragonforce]

Wah u hardcore racer la... I'm only a newbie...

 

 

 

I not sure if can fit the brembo rcs anot... i try to check with them and let u know again. I'm using Gipro X too! Great item! from the vid seems like cutting of wires are needed...

on the contrary, i am a very slow rider.. i think many riders here who dont go track at all go track once with me also can overtake me easily.. lol..

hey thanks alot.. keep me updated. if cannot fit on the rcs then no point i buy the brake lever side..

[pichudot]

i 'heard' about your new add on.. very crucial mod if want to go track yeah.. yup they are installed.. remember to take out your main stand before you go track.. got chance then meet up.. i try not to post pictures of my bike in forums..

 

actually i think our main stand not really very low...

should be ok ba... don't think need to take out.. never scrapped them before at most scrap my rear set pin... and my tyres are almost edge already... think if i managed to scrap the main stand then most probably i will be scrapping the ground already... hehe won't be pushing so hard also...

 

hmm.. not so sure about that.. i managed to scrap front part of my sidestand.. now that area rusted..

 

bros, try trimming the rubber stopper of your mainstand, you will be able to gain a bit more height for your mainstand...

of cus, after doing this, pls do not hop on your bike and rock ur bike down from main stand, it will cost more damages...

 

 

Anyone interested in this Puig lever??? Looks nice lei... I check for the price pretty cheap also... haha

 

looks nice! but i'm waiting for my ASV to reach my hands...

where's mark? hehehehe...