Yamaha TDM 900

[Paikia44]

Lane splitting with AT bar is also np. Bar risers good, especially when you get older, its more ergonomical on your already stress fireman back.

 

Agree on the more upright sitting position with risers. Although personally it feels that the front is 'lighter' since you merely hold the handbars instead of pressing it down like on a sports bike.

[reptiletan]

Haha.. Thanks for the feedback and helpful advises.. think I shall go for the AT bars.. A cheaper alternative compared to getting a scram bar plus risers..

[heaven51]

haha.. i asking where to get the handlebar.. cos i looking for a change of the stock one without the need of spending more to get risers.. if i get renthal or pro taper, i would need to spend on risers.. haha..

 

 

 

for me i personally love the feel of a scram handlebar so no problems for me on that part.. and it beats the feeling i get on the stock bars.. hahah..

 

so ure saying the AT bars can fit sweetly on our tdm? it wont get in the way of the windshield or stretch the cables out? no cons whatsoever?

 

Some loves wide bar feeling, some hate it...

 

If i am not wrong, AT bars no need risers per se although most of us who are on AT bars have risers. It's still wider than stock TDM's and you have to find the sweet spot position so the bars has enough clearance for the tank and windscreen (esp if u have aftermarket ones). With risers the cables will be stretched to the max but still functional. I adjusted mine previously when the bar was dismantled to access the ignition console and now its not at it's optimal position and there's a fair bit of freeplay on the throttle now.

 

Adjust it again, takes only a minutes... If you add another 2" riser that position will be even better... More upright, lesser stress on our "OLD" back...

 

[ATTACH=CONFIG]223189[/ATTACH][ATTACH=CONFIG]223190[/ATTACH][ATTACH=CONFIG]223191[/ATTACH]

The AT bar fits. You can see diameter of the bar from these photos. Hope this helps you envision it.

 

Lane splitting with AT bar is also np. Bar risers good, especially when you get older, its more ergonomical on your already stress fireman back.

 

Agreed !!!

 

Agree on the more upright sitting position with risers. Although personally it feels that the front is 'lighter' since you merely hold the handbars instead of pressing it down like on a sports bike.

 

When its spread wider, gives a easier handling feel, just like scrambler... Only draw back is squeezing thru traffic, sometime might crash onto car side mirror, esp MPV and lorry...

Edited October 28, 2011 by heaven51

[heaven51]

Hi TDMers... Buying/Shopping Time...

 

Going to buy a set of AFAM Sprockets (Front ~ 16, Rear ~ 42... Same as stock)...

Then go Ah Boy to buy the DID 525 Chain... And install at your own bike shop...

That should able save you at least $80~100...

 

Now website got Free Worldwide Shipping till 29 Oct...

http://www.redracingparts.com/en/english.htm#english/motorbikesmotorcycles/productsandcomponents/general/intro/stockstandardpitchchainssprockets.php

 

Total should be less than SGD80... Will be buying by 28 Oct...

 

Who wants to tag along... Fast fast...

 

(1) Paikia

(2) DivineCreations

 

Cuts off time: 2200hrs, 28 Oct 2011

[twinterror]

Hey bro, interested in the afam sprockets.

 

Any idea wat are the available colors?

[twinterror]

Hi TDMers... Buying/Shopping Time...

 

Going to buy a set of AFAM Sprockets (Front ~ 16, Rear ~ 42... Same as stock)...

Then go Ah Boy to buy the DID 525 Chain... And install at your own bike shop...

That should able save you at least $80~100...

 

Now website got Free Worldwide Shipping till 29 Oct...

http://www.redracingparts.com/en/eng...ssprockets.php

 

Total should be less than SGD80... Will be buying by 28 Oct...

 

Who wants to tag along... Fast fast...

 

(1) Paikia

(2) DivineCreations

(3) TwinTerror (Gold Color)

[Paikia44]

Hey bro, interested in the afam sprockets.

 

Any idea wat are the available colors?

 

Brudder.... U MIA so long & got good lobang suddenly pop up! Hahaha!!

 

Anyone interested in Termignoni exhaust???

http://www.redracingparts.com/en/english.htm#english/motorbikesmotorcycles/partsandaccessories/termignoniexhaustsystems/yamaha/TDM9002002.php

 

Looks darn good!!

[heaven51]

Hi TDMers... Buying/Shopping Time...

 

Going to buy a set of AFAM Sprockets (Front ~ 16, Rear ~ 42... Same as stock)...

Then go Ah Boy to buy the DID 525 Chain... And install at your own bike shop...

That should able save you at least $80~100...

 

Now website got Free Worldwide Shipping till 29 Oct...

http://www.redracingparts.com/en/eng...ssprockets.php

 

Total should be less than SGD80... Will be buying by 28 Oct...

 

Who wants to tag along... Fast fast...

 

(1) Paikia

(2) DivineCreations

(3) TwinTerror (Gold Color)

 

Order Closed ! Items ordered already !

 

Each of us pay only $75

 

Less than $80 as per stated...

[heaven51]

Brudder.... U MIA so long & got good lobang suddenly pop up! Hahaha!!

 

Anyone interested in Termignoni exhaust???

http://www.redracingparts.com/en/english.htm#english/motorbikesmotorcycles/partsandaccessories/termignoniexhaustsystems/yamaha/TDM9002002.php

 

Looks darn good!!

 

Looks good yea but you going to have problem getting it "CERTIFIED"... Everyday have to look out for man-in-white if install...

 

Haiz... Sillypore...

[Paikia44]

Order Closed ! Items ordered already !

 

Each of us pay only $75

 

Less than $80 as per stated...

 

Once again.... Many many thanks Glenn!!!!!

[reptiletan]

morning people! work end lo! time to sleep! hahah.. :cheeky:

 

i saw the termi exhaust too! and with the free shipping, it was really an awesome deal! hahah.. but i dun like to live my life in fear.. haha.. esp from men in white! hahah..

[superspeed123]

Thanks Glenn for coordinating this! Count me in for this purchase.

 

Anyway.... anyone wana buy brembo front brake master cylinder? My OEM one seal going kapoot... Now brake very intermmident and harsh.[/quote

 

Few months back, Bikeworkz quote me $450 for Brembo 19RCS with installation but without brake reservoir. Just bought 2 sets of front Brembo sintered brake pads from http://www.redracingparts.com for about $100 with shipping. Quite cheap in my opinion. Going to fix it myself. Hurry !!! Free shipping until 29 Oct only!!!!!

[kmax]

that link said new termi about 700+ EURO.. about 1500 S$..

 

locally it's about 1700+ S$ from racewerks.

 

you can get Remus hexacone for 1500 S$ at motoworld... or scorpion for 1380$ at equip extreme.

 

but if u purchase online with proper certificate, it's rather easy to get it register..

 

Looks good yea but you going to have problem getting it "CERTIFIED"... Everyday have to look out for man-in-white if install...

 

Haiz... Sillypore...

 

http://www.singaporebikes.com/forums/showthread.php?p=6258778#post6258778

 

http://www.termignoni.it/pages/materiali.php?marcaMoto=YAMAHA&modelloMoto=TDM%20900&annoMoto=2002%20-%202006&impianto=2%20SIL%20STR&cod_scarico=Y060

 

 

I asked norman already.... But dun u think the pipe looks not tilted up enough??

 

I also called .........$1725 for Alu. Quite ex huh...........

[reptiletan]

that link said new termi about 700+ EURO.. about 1500 S$..

 

locally it's about 1700+ S$ from racewerks.

 

you can get Remus hexacone for 1500 S$ at motoworld... or scorpion for 1380$ at equip extreme.

 

but if u purchase online with proper certificate, it's rather easy to get it register..

I jus checked with motorworld yest.. Remus hexacone is 1800.. Scorpion is 1400 and gianelli is 1200 from EE.. Arrow no more production for Tdm and akra non legal.. Waiting for racewerks to get back to me for the termi pipes.. Haha..

[kmax]

remus price gone up... fwoo.. motoworld also must go with someone known face..

 

[heaven51]

Good morning folks !!!

 

I jus checked with motorworld yest.. Remus hexacone is 1800.. Scorpion is 1400 and gianelli is 1200 from EE.. Arrow no more production for Tdm and akra non legal.. Waiting for racewerks to get back to me for the termi pipes.. Haha..

 

Wow... You better bring Kmax along to have a better discount ! Then treat him an $200 kopi... Update us the price...

[heaven51]

Paikai... Manage to find a cheap and BIG Ah Tiong top box.... 56litre...

 

http://www.ebay.co.uk/itm/TOPBOX-Large-Top-Rear-Luggage-Box-56LITRE-Yamaha-TDM900-/180546228396?pt=UK_Motorcycle_Parts&hash=item2a0964d0ac#shId

[kmax]

Paikai... Manage to find a cheap and BIG Ah Tiong top box.... 56litre...

 

http://www.ebay.co.uk/itm/TOPBOX-Large-Top-Rear-Luggage-Box-56LITRE-Yamaha-TDM900-/180546228396?pt=UK_Motorcycle_Parts&hash=item2a0964d0ac#shId

 

fugly..... \m/

[DivineCreations]

heaven is your windscreen like this

 

can post picture of your windscreen..pls thank you

[kmax]

looking back good old times...

 

sorry a little late to post few photos of last friday...was busy during the weekend..

 

Anyways...

http://i154.photobucket.com/albums/s261/khamizAJ/DSC05825.jpg

Here's the 2 rider who is now in Siem Reap Cambodia...Ansley just sms me at 4am...

http://i154.photobucket.com/albums/s261/khamizAJ/DSC05823.jpg

 

And welcoming our new TDM rider Angelo and wifey...

http://i154.photobucket.com/albums/s261/khamizAJ/DSC05816.jpg

Who strangely,spoke like a true Singaporean...unlike Ansmania...

 

And did you guys see the news on teebee yesterday about the SCB marathon?

I saw Virus on his TDM at the starting line doing his job...wah...

 

http://i154.photobucket.com/albums/s261/khamizAJ/misctoday692.jpg

 

http://i154.photobucket.com/albums/s261/khamizAJ/misctoday739.jpg

 

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/166306_1793109705210_1163693440_32152781_6255137_n.jpg

 

http://i19.photobucket.com/albums/b192/limpflink/TDM900/DSC04406.jpg

 

http://i154.photobucket.com/albums/s261/khamizAJ/2934318436_69409cbec4-1.jpg

 

http://i154.photobucket.com/albums/s261/khamizAJ/TDMtoFraserHill16-17Feb08056.jpg

 

http://i154.photobucket.com/albums/s261/khamizAJ/TDMtoFraserHill16-17Feb08054.jpg

[heaven51]

fugly..... \m/

 

Agreed ! Paikai like it BIG !!! 56litre...

 

heaven is your windscreen like this[ATTACH=CONFIG]223558[/ATTACH]

 

can post picture of your windscreen..pls thank you

 

According to previous owner, its from biketech21, Powerbronze ~ Flip Screen... (last piece)

last time when he purchase...

 

http://www.powerbronze.co.uk/907050/818268/831915/FLIP---YAMAHA-TDM900---CLEAR.item

 

http://i426.photobucket.com/albums/pp350/glennkoh/TDM900/Picture002.jpg

Edited October 31, 2011 by heaven51

[superspeed123]

Hi, any bro kind enough to tell me which wedsite i can order Rox Speed FX raisers with shipping at a reasonable price ??? Thanks many many !!!!

[Paikia44]

Agreed ! Paikai like it BIG !!! 56litre...

 

Oei.... Since when I want a BIG topbox? I am very happy with my 38L Trax...

[heaven51]

Hi, any bro kind enough to tell me which wedsite i can order Rox Speed FX raisers with shipping at a reasonable price ??? Thanks many many !!!!

 

http://www.ebay.com/itm/New-Rox-Handlebar-Risers-Handle-Bars-Elite-Pivoting-2-1R-P2SE-/110747432127?pt=Snowmobile_Parts_Accessories&vxp=mtr&hash=item19c90fb4bf

 

 

Or you can call Unique for pricing... See which one cheaper...

 

 

 

Oei.... Since when I want a BIG topbox? I am very happy with my 38L Trax...

 

Sorry, my bad... I only remember something BIG... LOL...

[kmax]

Hi to all,

 

I have a small dent (5-6cm diameter) on the right side of my fuel tank which I only realized recently when I went for servicing. The cause of it is unknown and its tankbra is always on. Has anyone ever done a repair for such dents? What is the process like? Anyone care to advise? Is there a way to undent it without respray or damaging the current paintwork? Thanks.

 

most car paint shop should be able to do it... last time i heard only cost 30$ or so..