Yamaha XT1200Z Super Tenere

[ramen71]

were u the one that we met @ ASP Serangoon yesterday evening?

 

Yes,It's me,congrats on your new purchase of S10.

[happy125]

Did CO adjustment, +4 for both cylinders.

 

My finding, S mode much smoother but T mode found it a bit "rough"

 

Any bros who have done the CO adjustment, care to share yr finding.

[Kevs]

were u the one that we met @ ASP Serangoon yesterday evening?

 

Yes,It's me,congrats on your new purchase of S10.

 

i think ure replying to me, gota quote as it'll be messy if without..

 

thnx bro!

[hockie69]

Did CO adjustment, +4 for both cylinders.

 

My finding, S mode much smoother but T mode found it a bit "rough"

 

It depends on your setup.example : slip-on, FS ,with or w/o filter etc.

 

I recall there is such a discussion on the FB side. Keke

[Encik Pat]

finally ... got mine Tenere liao

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/388420_2416229259518_1664951623_2422329_264254450_n.jpg

[ramen71]

finally ... got mine Tenere liao

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/388420_2416229259518_1664951623_2422329_264254450_n.jpg

 

Congrats and Happy Riding,Hopes no more complains:thumb:

[Encik Pat]

Congrats and Happy Riding,Hopes no more complains:thumb:

 

if you havent complain .... than i think i will not complain ... hahaha.. thank you

[biting_point]

finally ... got mine Tenere liao

 

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/388420_2416229259518_1664951623_2422329_264254450_n.jpg

 

Nice white!!

[Kevs]

anyone has this problem?

 

the mirrors will automatically vibrate out of view?

 

especially my left side, as the IU's attached there via the IU bracket, had to keep re-adjusting the mirror.

 

other than that, the vibrations are so far so good to me, had to get used to the clutch, biting point and throttling thou..

[Encik Pat]

Nice white!!

 

thank you .... going for running in ...

[ooitn]

Nice...match my jacket.....

[whyzee]

anyone has this problem?

 

the mirrors will automatically vibrate out of view?

 

especially my left side, as the IU's attached there via the IU bracket, had to keep re-adjusting the mirror.

 

other than that, the vibrations are so far so good to me, had to get used to the clutch, biting point and throttling thou..

 

Its bcos of the iu bracket for sure. Try to relocate ur iu. The mirrors couldnt be full tighten bcos of it.

[whyzee]

Btw, let's meet this Friday night. What u all say?

[biting_point]

anyone has this problem?

 

the mirrors will automatically vibrate out of view?

 

especially my left side, as the IU's attached there via the IU bracket, had to keep re-adjusting the mirror.

 

other than that, the vibrations are so far so good to me, had to get used to the clutch, biting point and throttling thou..

 

If only the mirror itself is moving outta place, the's a nut hidden by the plastic..

Just pull down the plastic and tighten the nut..

 

But if the whole stem is moving, it should be the IU bracket..

Have you tried tightening the mirror??

 

Else endure and go Seng Kwang to make a new one..

[biting_point]

Btw, let's meet this Friday night. What u all say?

 

I'm good..

[hockie69]

Btw, let's meet this Friday night. What u all say?

 

Noted....will be passport along (just in case) lolx

[hockie69]

finally ... got mine Tenere liao

 

 

Congrats & welcome to SGP S10 community.

 

Very nice.

[hockie69]

anyone has this problem?

 

the mirrors will automatically vibrate out of view?

 

 

Congrats & welcome to SGP S10 community.

 

Get the IU OFF the mirror and locate it on the firk clamp or handle clamp or RAM mount style if IU not often use.

 

Cheers

[biting_point]

Noted....will be passport along (just in case) lolx

 

Good idea..

[happy125]

A blue S10 zoom past me at TPE today about 12.30 pm.

Any bro here?

 

I was testing the various CO adjustment , + 4 to +10

 

I do not have after market exhaust, so just curious what these adjustment feel like.

 

My finding , increasing the CO setting, my bike feel much smoother in S mode.

The best setting for me is +4.

 

The more the adjustment, I felt the throttle response in S mode was like in T mode, very like 'delayed' dont have that grunt and suddeen 'kick' in power.

 

Adjusted back to original setting.

Still love the grunt and surge in power in original setting.

[Encik Pat]

Btw, let's meet this Friday night. What u all say?

 

Alamak .. Malacca ... 3NCR...

Edited November 13, 2011 by Encik Pat

[Kevs]

Its bcos of the iu bracket for sure. Try to relocate ur iu. The mirrors couldnt be full tighten bcos of it.

 

If only the mirror itself is moving outta place, the's a nut hidden by the plastic..

Just pull down the plastic and tighten the nut..

 

But if the whole stem is moving, it should be the IU bracket..

Have you tried tightening the mirror??

 

Else endure and go Seng Kwang to make a new one..

 

Congrats & welcome to SGP S10 community.

 

Get the IU OFF the mirror and locate it on the firk clamp or handle clamp or RAM mount style if IU not often use.

 

Cheers

 

the stem's tight, jus the mirror leaf vibrates out of view, hopefully nt the ball joint damaged.

 

horkay, will see if i can gt the bracket exchanged to the handlebar clamp mount type, as will need the IU daily due to touring of PIE, hopefully it'll solve the mirror moving issue.

[Kevs]

Btw, let's meet this Friday night. What u all say?

 

im gd as long as its nt too late, local or oversea oso ok, put time put place?

[happy125]

the stem's tight, jus the mirror leaf vibrates out of view, hopefully nt the ball joint damaged.

 

horkay, will see if i can gt the bracket exchanged to the handlebar clamp mount type, as will need the IU daily due to touring of PIE, hopefully it'll solve the mirror moving issue.

 

This IU bracket really sucks.

 

I had the bar-riser installed, as we all know those lines/cables are a bit thight/stretched.

So i moved the brake and clutch levers inwards, but this IU blocking.

SO instead of having the IU mounted with 4 screws originally, i moved it in and mounted with 2 screws only.

 

Now no worries about cables being too tight.

[happy125]

Btw, let's meet this Friday night. What u all say?

 

I m OK for meet up.