The GSXR 600,750 & 1000 Hangout. Where All GSXR Riders Chill And Gather!!

[kuwaiyert]

Hmmm... i stay cck... west side..

[EvilGixxer]

Hi, is there any shop for Suzuki original parts or aftermarket parts (eg. fairings)

i only know Honda is FJT at Rowell.

 

Thanks alot.

 

Its KS near regina that road... on the right.

[EvilGixxer]

Selling PC3 USB for k6/k7 600/750!!

 

HEL Brakehose!

 

ZG double bubble - clear smoked!

 

Pipercross Air Filter!

 

Headlight protector!

 

All for K6/K7 600/750 only!

[hackers1]

Hmmm... i stay cck... west side..

 

cck which blk me also cck.

[SkYrr]

Its KS near regina that road... on the right.

 

Thanks alot! Do u know they open wat time till wat time ?

[kuwaiyert]

Hi, is there any shop for Suzuki original parts or aftermarket parts (eg. fairings)

i only know Honda is FJT at Rowell.

 

Thanks alot.

 

Guang hoe cheong also official suzuki products.. before mah, opp.. but only sell original parts... no acc..

 

cck which blk me also cck.

 

we neighbours... Mine yew tee to be exact.. 685.. ...

[hackers1]

Guang hoe cheong also official suzuki products.. before mah, opp.. but only sell original parts... no acc..

 

 

 

we neighbours... Mine yew tee to be exact.. 685.. ...

 

the kopitiam there? near logistic camp??? i stay limbang... great next time go out can meet u 1st

[kuwaiyert]

the kopitiam there? near logistic camp??? i stay limbang... great next time go out can meet u 1st

 

Around Here got 3 kopitiams.. mine beside the mrt tracks.. opp unity pri..

[EvilGixxer]

Thanks alot! Do u know they open wat time till wat time ?

 

office hours only.

[personified]

morning.

 

omar. try asking personnified i think he cut/chop his yoshi.

 

noooooooooooooo..bro i never cut my pipes..its a yoshi R55 straight from the box,even have the noise reduction box (AMA regulations) in there but might take it out soon

i remembered someone else did it but dunno who..

[personified]

Hi, is there any shop for Suzuki original parts or aftermarket parts (eg. fairings)

i only know Honda is FJT at Rowell.

 

Thanks alot.

 

I have with me all original Suzuki K9 600 parts,used for couple of weeks (running in bike) then stripped n now hanging around at my place..

from front fender,complete fairing to tail piece

contact me 97978686.

[personified]

btw i m considering selling my

1)Yoshi R55 end can with carbon end..only 3 months old but have a small unnoticable chip (due to the bladdy towing service guy)

2) power commander 5 (yoshi em pro is too tempting liao)

3) full set of motovation protections,5 months old,( front,swingarm and frame sliders)

4) used Pirelli Diablo SC2 ..$180 (used for sepang race1 n race2,total laps 8,1 lap 5.5km.so go calculate how many km)

sms 97978686 to offer..reasonable offer please..

Edited July 3, 2010 by personified

[wildboyz78]

i stay admiralty bro...

[barryfromsg]

HELP!!! im riding a gsxr k7 1000, anyone knows anything about the O2 wire.. i dun have it cos when i change to arrow exhaust.. the person take out... then tell me say that thing nv put nvm 1... when i ask him then why nv put then he tell me cos i change exhaust... now i wana find back the shop to put back the wire for the O2 sensor.. can anyone tell me whether shld i put back or just leave it?

[FunkyChicken]

K8/9 1000 FULL SYSTEM carbon 4-2-1 Leovince with pc3 for $1.8k

http://i319.photobucket.com/albums/mm471/Nagle_GSXR/bikepicthree1.jpg

 

k6/7/8 600/750

lightech racing footrest/rearsets made in italy. brand new $700+ goin for $300 cash

http://www.racebydesign.co.uk/images/LIGHTECH%20CBR%20REARSETS.JPG

factory pro velocity stacks $150 cash plus swap oem rubber stacks

http://www.factorypro.com/images/V_Stacks/Suz,VStack,gsxr750,03,testsession.JPG

CALL NOW!!

92395196

FAZLEE

Edited July 3, 2010 by FunkyChicken

[ICE87]

bro...velocity stacks can fit on k5600..?

[kaii69]

K8/9 1000 FULL SYSTEM carbon 4-2-1 Leovince with pc3 for $1.8k

http://i319.photobucket.com/albums/mm471/Nagle_GSXR/bikepicthree1.jpg

 

k6/7/8 600/750

lightech racing footrest/rearsets made in italy. brand new $700+ goin for $300 cash

http://www.racebydesign.co.uk/images/LIGHTECH%20CBR%20REARSETS.JPG

factory pro velocity stacks $150 cash plus swap oem rubber stacks

http://www.factorypro.com/images/V_Stacks/Suz,VStack,gsxr750,03,testsession.JPG

CALL NOW!!

92395196

FAZLEE

 

tempting! upsss

[JoJo]

Good Morning Mates.

 

I done reaching 11,000km on my k9 600.

The key hole where i use to start my bike is getting hard for me to

plug my key in/out and turning the bike on/off.

 

Any one gotten this problem?:dunno

Any help will be appreciated.

 

Thanks & Regards

[hackers1]

Good Morning Mates.

 

I done reaching 11,000km on my k9 600.

The key hole where i use to start my bike is getting hard for me to

plug my key in/out and turning the bike on/off.

 

Any one gotten this problem?:dunno

Any help will be appreciated.

 

Thanks & Regards

 

i have this prolem. whn putting the key in try 2 aim center.

 

switch u need to give pressure to a direction then turn. for mine i pressure against 2pm to turn on ignition. go try.

[prettymussel]

btw i m considering selling my

1)Yoshi R55 end can with carbon end..only 3 months old but have a small unnoticable chip (due to the bladdy towing service guy)

2) power commander 5 (yoshi em pro is too tempting liao)

3) full set of motovation protections,5 months old,( front,swingarm and frame sliders)

4) used Pirelli Diablo SC2 ..$180 (used for sepang race1 n race2,total laps 8,1 lap 5.5km.so go calculate how many km)

sms 97978686 to offer..reasonable offer please..

 

yo bro, i'm interested in the motovation front & swingarm sliders only..

i have already installed frame on my bike.

 

do let me know if u're intending to sell them separate from the frame sliders!

[prettymussel]

Good Morning Mates.

 

I done reaching 11,000km on my k9 600.

The key hole where i use to start my bike is getting hard for me to

plug my key in/out and turning the bike on/off.

 

Any one gotten this problem?:dunno

Any help will be appreciated.

 

Thanks & Regards

 

wah lau so fast 11000km! mine still 4800 only!

 

i thought holes shld get looser over time, and not tighter!

 

anyway i read abt this before on the US gixxer forum i think; the metal cover on the keyhole can be rotated such that it wont align with the actual keyhole.

 

ur prob could be that the metal cover on the keyhole might be slightly misaligned with the lower part.. such that ur key can still go in, but got friction.

 

maybe just try to turn the metal cover around until it is perfectly aligned again?

[kaii69]

Good Morning Mates.

 

I done reaching 11,000km on my k9 600.

The key hole where i use to start my bike is getting hard for me to

plug my key in/out and turning the bike on/off.

 

Any one gotten this problem?:dunno

Any help will be appreciated.

 

Thanks & Regards

 

@ first i got this problem oso..

bro where u stay? my house downstairs got 1 new k9 600

my key hole there look as if got pple disturb before lidat

 

i have this prolem. whn putting the key in try 2 aim center.

 

switch u need to give pressure to a direction then turn. for mine i pressure against 2pm to turn on ignition. go try.

 

thanks for de advice i will go try =)

[MC28]

Good Morning Mates.

 

I done reaching 11,000km on my k9 600.

The key hole where i use to start my bike is getting hard for me to

plug my key in/out and turning the bike on/off.

 

Any one gotten this problem?:dunno

Any help will be appreciated.

 

Thanks & Regards

 

Try spraying some GT85 or WD-40 into that hole bro..It helps to lubricate and ensure smoother entry...And also some on the rotatable plate :angel:

[SHiKen]

hey guys,ani 1 got seen any gsxr 1000 k6 ard in shops at resonable price/

[JoJo]

wah lau so fast 11000km! mine still 4800 only!

 

i thought holes shld get looser over time, and not tighter!

 

anyway i read abt this before on the US gixxer forum i think; the metal cover on the keyhole can be rotated such that it wont align with the actual keyhole.

 

ur prob could be that the metal cover on the keyhole might be slightly misaligned with the lower part.. such that ur key can still go in, but got friction.

 

maybe just try to turn the metal cover around until it is perfectly aligned again?

 

might be the metal cover as i alwas adjust it when im in malaysia.

will try out lata. thanks buddy!

 

i have this prolem. whn putting the key in try 2 aim center.

 

switch u need to give pressure to a direction then turn. for mine i pressure against 2pm to turn on ignition. go try.

thanks buddy!

@ first i got this problem oso..

bro where u stay? my house downstairs got 1 new k9 600

my key hole there look as if got pple disturb before lidat

 

 

 

thanks for de advice i will go try =)

 

ehh bro, dun scare me lei. dun tink tat 1 is me la. my bike 7months old liao

i stay tamp

Try spraying some GT85 or WD-40 into that hole bro..It helps to lubricate and ensure smoother entry...And also some on the rotatable plate :angel:

 

thanks buddy! did that to my sp fuel cap cover when its not smooth.

but scare to anyhow spray stuff on my this bike.