[Group] Yamaha FZ16

[yian_1989]

My condolences, how much for the towing and repair? It is my first time hearing wires breaking but maybe it is the wires that are located around the pivot part of the front head where your handlebar turns.

 

I do not quite get you for your second question about putting in your number and having group in the case haha, it might just be me who do not understand though.

I think so too... total cost me 60...

 

 

previously somebody mentioned having a whatsapp group... so I gave my number but after that nothing... so I assume nobody wants it... haha

[ah_lionel]

....

previously somebody mentioned having a whatsapp group... so I gave my number but after that nothing... so I assume nobody wants it... haha

 

There is no appointed leader to create a group ma.. hahaa

[Jtanc39]

Thanks Lionel!

[Jtanc39]

Guys just to share my experience. I change my oil filter and engine oil for the first time at 1k and was advised to put in 1l instead of the stated 1.1l when you change oil filter. After about 500km,i became paranoid and decided to just take a look at the dip stick and realised that the level is really lower than the minimum. Decided to top up 100. I have to say there's really a difference in performance! The most obvious one would be my top speed. It's not a lot but about 5km/hr based on my usual route. Conclusion, follow manual and just top up 1.1l when you change oil filter. Period.

[skateboy]

when checking oil level, bike shd be upright. oil level shd be between low n high level. too little oil will deem not having sufficient lubrication esp if the bike got cases of blow pass like phantom. too much oil will cause to bike to feel sluggish. so just top up sufficient will do. if changing oil filter, top up to max, start the engine n let it run awhile n then stop for 5 mins then check again. if its sufficient, no need to top up.

[skateboy]

Thats why. Think back like not worth it. Might as well just put yoshi and do some setting

 

save the cash for a bigger cc bike. instant power up n stability at high speed. fz16 is a good commuting bike. low maintenance with v.good fc.

[ah_lionel]

save the cash for a bigger cc bike. instant power up n stability at high speed. fz16 is a good commuting bike. low maintenance with v.good fc.

 

*like like*

[luminicious]

lai lai lionel can be the leader

90032143

[ah_lionel]

I've just created a whatapp group

 

do let me know if u interested to join in.

msg here or pm me

 

😂😂

[Jtanc39]

Thanks Lionel! PM sent!

[Leong79]

:clapping: Edited August 9, 2014 by Leong79

[Leong79]

How much is the fz16 cost now? Which bike shop is the best? Looking to get one!

 

9.5k with road tax

[amrulhakim]

9.5k with road tax

 

Hi Leong,

 

any bike shop to recommend? knn ex bcoz of coe. bike nvr ever contribute to the jam!!! y disturb bike coe!

[Mizann10]

Hi, any idea where to repair my crack fz16st tank cover ?

[yian_1989]

Hi, any idea where to repair my crack fz16st tank cover ?

You need to replace the cover. Anywhere that sells FZ16 accessories will usually have...

[Mizann10]

You need to replace the cover. Anywhere that sells FZ16 accessories will usually have...

 

Can name me the shop ? Thanks

[ah_lionel]

Can name me the shop ? Thanks

try*

Auto Machinery Supply Pte Ltd

41 Rowell Road, Singapore 207992

Tel: 6292 9452*

 

Auto Machinery Supply Pte Ltd*

(Frontier Bldg). 50 Ubi Ave 3 #01-13 Frontier S(408866).

+65 67498051

 

or*

 

hong leong @ paya lebar

[Toknowmore]

Anybody know the price of this?

[luminicious]

Anybody know the price of this? [ATTACH=CONFIG]309919[/ATTACH]

 

Depends on your haggling skills with Ah Boy

[Leong79]

Hi .Fz16 front .rear can fit 120/60. 160/60 tyre?

[luminicious]

Hi .Fz16 front .rear can fit 120/60. 160/60 tyre?

 

Yeap. But do note a change in tyre size would affect your fuel consumption, stability and speed.

[Toknowmore]

Depends on your haggling skills with Ah Boy

 

Hahahaha, understand! But the price is around??

[Mizann10]

try*

Auto Machinery Supply Pte Ltd

41 Rowell Road, Singapore 207992

Tel: 6292 9452*

 

Auto Machinery Supply Pte Ltd*

(Frontier Bldg). 50 Ubi Ave 3 #01-13 Frontier S(408866).

+65 67498051

 

or*

 

hong leong @ paya lebar

 

Heres the photo that crack. Both shop don't have stock. Hong leong got stock, but confuse with the price. They asked me to go there for clear explanation. Btw my bike is fz16st

[luminicious]

Hahahaha, understand! But the price is around??

 

Last saw online it was going for $50. At JB Ah Boy it was RM100. So I would guess.... $35? 30??

[luminicious]

-Repost- 10chars