Honda NSR150SP Riders

sanseiu · February 29, 2008

dash! u good with comp stuff ar? my 200 gb hdd sot sot leh. although i plug it in. but it can be detected leh.

i suspect corrupted? coz before that i was transferring a large amount of files.

lol how ar? can repair?

moreira88 · February 29, 2008

hi guys,need some advice on my bike problem.. i got post here b4 and asked why my 2t makan very fast like every week need refill.. so i go bikeshop and tune down to minimum ready but still same.. then i realized something leaking to the stomach so changed gasket and oil seal but now still leaking..think is engine oil leak.. and also anyone experience got black2 liquid coming out from the exhaust and splatter all over your shirt? thanks in advance!

hmmm.. could be your 2t pump spoil....

u work there? i remember going down to ask them how much for seat rewrap when their new shop just opened. wanted to charge me 80 sia. around that. next day go eugene rewrap better =.=

yeah.. i'm working there now... for the moment at least... no lar where got charge so much to rewrap sp? unless your design super tok kong one lar... usually costs about 30 or so....for both front and back...

compfused · February 29, 2008

dash! u good with comp stuff ar? my 200 gb hdd sot sot leh. although i plug it in. but it can be detected leh.

i suspect corrupted? coz before that i was transferring a large amount of files.

lol how ar? can repair?

What kinda files was that? Must be those "nice" colour videos..That's why corrupted la..

hyeah.. i'm working there now... for the moment at least... no lar where got charge so much to rewrap sp? unless your design super tok kong one lar... usually costs about 30 or so....for both front and back...

Like that can ask for discount la..Got transparent wrap? Or glow in the dark ones? Or those water bed type?

moreira88 · February 29, 2008

Like that can ask for discount la..Got transparent wrap? Or glow in the dark ones? Or those water bed type?

haha.. discount.. should be able to get.. transparent wrap ar?... liddat... see your seat inside leh... then the seat inside not nice one.. brown yellow.. glow in the dark have also.. but not worth it lar... sure charge ex one cos of the material.....

hahaha... water bed type.. later ppl poke your sit next day you come down see why wet wet.. hahaha

NewUrbanMale_LSM · February 29, 2008

its not that they cant post questions. i mean its good to ask and know more about your bike. but once a problem occurs. i always feel its the best to bring it down to your trusted mech to get it solved asap.

alot of things regarding bikes, not many people will know simply frm reading a paragraph or 2. even if you tell the mechs what happen. they still have to check it out for themselves right?

no point us guessing here and there. just bring it for a check up if its sick.

yep ah chong!

But why Ah Chong never sell better 2T???!!! Resulting in me having to go all the way to Ah Boy!!! Haha.

You pro already la..Can diagnose problems..But should be crb dirty I think..Not usin filter for the airbox?

I took a business course once and 101% = bullshit..Anythin more than 100% is bullshit coz 100% is the most anythin can be..

Pro? I'm still a noob, but just guessing the root of the problem only. Hehe.

101%? Ok, 100% then. Haha.

weee.. finally weekend coming, outing coming!!

i have some questions to ask here :x

1) say for a speed of 80km/h, it's better to go at 4krpm or 7krpm, fc-wise?? coz i dunno wanna go at lower or higher gear..

2) for a 90% stock bike, only mod being empty end can, 165km/h at 10krpm is it ok? i tested my bike outside my camp, 1st, 2nd gear change at 9krpm, 3rd, 4th n 5th change at 10krpm.. den reach 6th gear at 150km/h the speed go up super slow liao, so reach 165km/h i juz slow down le..

that's all

Wow, a new racer is born.

i not sure abt the air box thingy.

but u throttle no power = valve cannot open meh? i aint no mech so i dont know. but i thought if valve cannot open means no surge in power only mah. since when does it cause loss in power instead.

Yeah lor.

Throttle no power, has got anything to do with the valve? I thought it's either no fuel which cause the engine to die off slowly, or the carb dirty?

compfused · February 29, 2008

Wow, a new racer is born.

New? I beg to differ..

NewUrbanMale_LSM · February 29, 2008

spotted shaoming at hougang today afternoon around 12+ lols

LOL !

I believe you saw the right person, reason being the paintwork of my bike which i believed only me has it. LSM. Haha.

I was following my friend's van, and almost got lost at Hougang area. Never travelled there before and i was heading to Ubi.

Which part of Hougang did you saw me? Haha.

New? I beg to differ..

He's a racer for quite some time already? I thought he used to claim he is a safety rider?

happymiso · February 29, 2008

**OUTING**

Fun in the SUN!

Date:02 March O8 (SUNDAY)

Meeting Venue: Sembawang (Sun Plaza)

Time: 13:00 HRS

What to bring: $5 bucks... sun glasses. $3 bucks for f&b coupons.

What to expect: We RACE!

What to do if you're late: I also don't know.. try and find us.

What to wear: Berms/Jeans/T-Shirt/Shoes

Where to eat: The place got provide F&B stuffs.

Who to bring: Your GF's/ Pillion etc..

What to NOT bring: Lose earings/baggles?(spelling)/ Slippers. ditry underwear, dildo's, etc..

please contact JU if you're interested. @ 91557959

Cheers!

I just hope we will have fun during this day!

We will RACE RACE and RACE!!! but in a legal way..... yay! got prizes one ler...

1. Orange- (organizer) (RACER FROM INDONESIA)

2. Lost (legend) + 1 (Racer from HONG KONG)

3. Ah Liang (Racer from SDANLDOOW )

4. Djbotak + 1 (Racer from Thailand)

5. Thomas (Racer from Taiwan)

6. Hot Sauce + 1 (Racer from USA) UNABLE TO ATTEND DUE TO INJURY

7. Compfused (Racer from Johor)

8. Valentino Rossi (racer from Italy?)

9. Siva aka AH NEH (the F1 Racer from Bombay...)

10. Sky (erm... singapore?)

11. 759 (racer from bangladesh..)

12. Darkdragon88 (try to come?) low profile racer

13.evo28 (racer from Utah)

14. fx110(not JUST the SportBike, Malaysian Tuned)

15. hirushimo85+1 ( racer from nowhere )

16. Nels0n (racer from the sea)

17. Shine (racer from outer space)

18. Huat85 (racer from Brunei Jungle)

19. happymiso (racer from Japan)

20

please continue the list... and please declare which country u r racing from... duhz..

Please check SBF NSR 150 SP FORUM as the date draws nearer...

I will provide more information on what is happening.... Where to meet if you're late... etc...

Hightlights of this day....

TOP RACERS will win attractive prizes!

We'll race with one another.. in teams la.. if possible..

Have Fun..

Objectives...

To bring NSR Forumers into closer bonds.

To develope a foundation whereby everyone know's they belong to a certain group of riders who have to same interest in riding the same bike (or krr - rossi or tzm - kathe.)

*NOTICE*

If you're late, pls inform us so that we'll not wait for you.

We will leave sharp @ 1.00pm.

I will post venue to meet up so that we can move off together as a group to the destination.

Lunch - Own expense.

Tea Break - Own expense.

Race Fee - Own expense.

Race Prize - Organizing Body expense.

On the other note, we noticed that there are far too many accidents which happens during the outing. So as to which, a safety rider will be appointed when day reaches unless Kathe is coming.

cptknight · February 29, 2008

anyone knows where to buy acrylic license plate number ?

sanseiu · February 29, 2008

yeah.. i'm working there now... for the moment at least... no lar where got charge so much to rewrap sp? unless your design super tok kong one lar... usually costs about 30 or so....for both front and back...

well thats what they wanted to charge me and my friend. maybe they try to chop us? tsktsk. 219 trying to chop sia.

lucky i smart. next day go eugene better.

What kinda files was that? Must be those "nice" colour videos..That's why corrupted la..

lol no leh. but i dun know what happen also loh. then if i plug in my cd-rom drive cannot read leh. so now its just hanging in my comp unplugged

But why Ah Chong never sell better 2T???!!! Resulting in me having to go all the way to Ah Boy!!! Haha.

i think maybe he want to save on stock space loh. anyone 2t cant earn much what. only 2 strokers will buy it from him. he might as well use the storage space to stock more EO.

lol.

Orange- · February 29, 2008

LADIES AND GENTLEMEN.........

START YOUR ENGINES................

WE SHALL SEE.............

WHICH 19 OF US......

ONE OF US WILL BE THE TRUE RACER..................

02 MARCH 2008!!!

POST YOUR NAME NOW!!! haha...

will rossi beat sky's best timing at woodlands gudang or 44 seconds for 1 lap...?

let us see who's the sembawang track racer and beat sky's 44 seconds timing from woodlands gudang...

Orange- · February 29, 2008

good nite guys! cya! on sunday!

darkdragon88 · February 29, 2008

spotted shaoming at hougang today afternoon around 12+ lols

but y are u there in the first place?

LOL !

I believe you saw the right person, reason being the paintwork of my bike which i believed only me has it. LSM. Haha.

I was following my friend's van, and almost got lost at Hougang area. Never travelled there before and i was heading to Ubi.

Which part of Hougang did you saw me? Haha.

He's a racer for quite some time already? I thought he used to claim he is a safety rider?

i tot ur house very near to ubi y go hougang?

LADIES AND GENTLEMEN.........

START YOUR ENGINES................

WE SHALL SEE.............

WHICH 19 OF US......

ONE OF US WILL BE THE TRUE RACER..................

02 MARCH 2008!!!
POST YOUR NAME NOW!!! haha...

will rossi beat sky's best timing at woodlands gudang or 44 seconds for 1 lap...?

let us see who's the sembawang track racer and beat sky's 44 seconds timing from woodlands gudang...

ju the acrylic tat time i gif u still with u?

ost28 · February 29, 2008

weee.. finally weekend coming, outing coming!!

i have some questions to ask here :x

1) say for a speed of 80km/h, it's better to go at 4krpm or 7krpm, fc-wise?? coz i dunno wanna go at lower or higher gear..

2) for a 90% stock bike, only mod being empty end can, 165km/h at 10krpm is it ok? i tested my bike outside my camp, 1st, 2nd gear change at 9krpm, 3rd, 4th n 5th change at 10krpm.. den reach 6th gear at 150km/h the speed go up super slow liao, so reach 165km/h i juz slow down le..

that's all

1)for best fc wise sp and common sp out there...

go around 6.5 krpm for best fc..

dun look at ur speed coz .. its never accurate and u dun really know at wad speed is ur best fc is at ya ?

so .. see rpm .. 6 to 6.5k where there's no "bogging"

2) for common sp.. ya .. 160 is common and normal

senfeng · March 1, 2008

1)for best fc wise sp and common sp out there...
go around 6.5 krpm for best fc..
dun look at ur speed coz .. its never accurate and u dun really know at wad speed is ur best fc is at ya ?
so .. see rpm .. 6 to 6.5k where there's no "bogging"

2) for common sp.. ya .. 160 is common and normal

160 is call common? I have to believe that im slow rider already.

Haas.. Got a question I need to ask.

For your rear wheel, normally pump how much air inside?

Take it as with pillion?

huat85 · March 1, 2008

argh!!!!!!! my rpm is freaking the high man! omg... wats going on with my bike.. rpm so high but no power.. wat the hell.. after tat day i kana the curb de litat le.. guys.. can help me think of wat might cause the problem?

Nels0n · March 1, 2008

LOL !

I believe you saw the right person, reason being the paintwork of my bike which i believed only me has it. LSM. Haha.

I was following my friend's van, and almost got lost at Hougang area. Never travelled there before and i was heading to Ubi.

Which part of Hougang did you saw me? Haha.

He's a racer for quite some time already? I thought he used to claim he is a safety rider?

i still maintain im a safe rider juz decided to test test spd that fateful nite.. haha..

1)for best fc wise sp and common sp out there...
go around 6.5 krpm for best fc..
dun look at ur speed coz .. its never accurate and u dun really know at wad speed is ur best fc is at ya ?
so .. see rpm .. 6 to 6.5k where there's no "bogging"

2) for common sp.. ya .. 160 is common and normal

thks weijie.. last time i used to travel at 4krpm whr there is no bogging also.. but wan accelerate very diff.. so recently i try to get use to going at 6krpm++.. but wondering which rpm is better

loyjwe · March 1, 2008

hi guys,need some advice on my bike problem.. i got post here b4 and asked why my 2t makan very fast like every week need refill.. so i go bikeshop and tune down to minimum ready but still same.. then i realized something leaking to the stomach so changed gasket and oil seal but now still leaking..think is engine oil leak.. and also anyone experience got black2 liquid coming out from the exhaust and splatter all over your shirt? thanks in advance!

mine also like tat. minimum liao also onli 2 weeks. ya sure got carbon splatter all over my bike 1. my shirt nv kanna la pillion shirt have la. even my pillion feet on footrest also kanna ar. dunnoo y

i not sure abt the air box thingy.

but u throttle no power = valve cannot open meh? i aint no mech so i dont know. but i thought if valve cannot open means no surge in power only mah. since when does it cause loss in power instead.

But why Ah Chong never sell better 2T???!!! Resulting in me having to go all the way to Ah Boy!!! Haha.

Pro? I'm still a noob, but just guessing the root of the problem only. Hehe.

101%? Ok, 100% then. Haha.

Wow, a new racer is born.

Yeah lor.

Throttle no power, has got anything to do with the valve? I thought it's either no fuel which cause the engine to die off slowly, or the carb dirty?

mine is tat time i throtle untill almost all le the rpm keep jam at 5k like tat then go up very very slow. must wait very very long then it increase slowly. imagine all the car kanna stuck behind mi. haha. even i throttle till like all already still cant pick up. den if go upslope with tat problem huh, unless i go by rpm more then 6k, if not after the slope bike sure die.

then went ah chong 2 times still the sane problem ley. lastly went unique once and settled tats why been there already. although i do enjoy going chong there. workers more relax more talk ****.

senfeng · March 1, 2008

anyone going jb?

th2om8as7 · March 1, 2008

ju, how you manage to remove the previous paint before you spray again? give some tips leh.. i wana spray again.. just in case you missed my post..

sand off e laquer and paint....then laquer a few layer then paint then laquer again..

yeah.. i pay le.. hehe thx ah.. next time outing we all together wear.. power..

kkz

u take picture of ur spocket and post.. den we know wat spocket u using le:cheeky: if u using 428 and wan change to 520 change with me..

yup...i think i told him tt b4 aso...haha

hi guys,need some advice on my bike problem.. i got post here b4 and asked why my 2t makan very fast like every week need refill.. so i go bikeshop and tune down to minimum ready but still same.. then i realized something leaking to the stomach so changed gasket and oil seal but now still leaking..think is engine oil leak.. and also anyone experience got black2 liquid coming out from the exhaust and splatter all over your shirt? thanks in advance!

e black liquid is actually 2t...

160 is call common? I have to believe that im slow rider already.
Haas.. Got a question I need to ask.
For your rear wheel, normally pump how much air inside?
Take it as with pillion?

any1 thinks senfeng pic looks like wei jie frm xh???

compfused · March 1, 2008

sand off e laquer and paint....then laquer a few layer then paint then laquer again..

What's the lacquer in between the paints for may I know? Coz I find it weird to put somethin that needs half a day to completely dry (lacquer)..hen you paint over again..

any1 thinks senfeng pic looks like wei jie frm xh???

No..Because senfeng is a she..

NewUrbanMale_LSM · March 1, 2008

i think maybe he want to save on stock space loh. anyone 2t cant earn much what. only 2 strokers will buy it from him. he might as well use the storage space to stock more EO.

Ya lor. His space is filled with 4T. kns!

but y are u there in the first place?

i tot ur house very near to ubi y go hougang?

I suppose he went Hougang to find his darling?

I going Ubi from Yishun mah.

i still maintain im a safe rider juz decided to test test spd that fateful nite.. haha..

Ya right. But don't be a safety rider when you're on a RVF lei.

Haas.. Got a question I need to ask.
For your rear wheel, normally pump how much air inside?
Take it as with pillion?

For me, i pump rear 240 / 35, front 220 / 32. Not sure for the others.

mine is tat time i throtle untill almost all le the rpm keep jam at 5k like tat then go up very very slow. must wait very very long then it increase slowly. imagine all the car kanna stuck behind mi. haha. even i throttle till like all already still cant pick up. den if go upslope with tat problem huh, unless i go by rpm more then 6k, if not after the slope bike sure die.

then went ah chong 2 times still the sane problem ley. lastly went unique once and settled tats why been there already. although i do enjoy going chong there. workers more relax more talk ****.

Oh, then i think is your valve blocked.

kkz

Tom, called me yesterday night?

NewUrbanMale_LSM · March 1, 2008

Hmmm. Noticed that there are some people who wants a copy of the SP manual.

For those people who also want it, can SMS/call me at 91549915.

I'll help you photocopy it by using my own copy at my house area, and it'll be at your own expense as i've no extra copy already.

Call/SMS me if you need one too.

th2om8as7 · March 1, 2008

Tom, called me yesterday night?

wanted to ask if u wan go jb do full servicing??

ravenSP · March 1, 2008

For me, i pump rear 240 / 35, front 220 / 32. Not sure for the others.

isnt that too much? why, harder tires last longer?

imho, 190-200front, 200-210kpa rear is just nice. harder than that.. well...

Hmmm. Noticed that there are some people who wants a copy of the SP manual.

For those people who also want it, can SMS/call me at 91549915.

I'll help you photocopy it by using my own copy at my house area, and it'll be at your own expense as i've no extra copy already.

Call/SMS me if you need one too.

if anyone wants to download the manual..

http://raven.qsurf.org/raven/NSR150SP.zip

it basically has nothing much in it...

oh btw, if anyone is free, why not help add to the nsr150 faq some of us compiled?

its here btw..

Sign In

Join SingaporeBikes.com today! Where Singapore Bikers Unite!

Honda NSR150SP Riders

Recommended Posts

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Join the conversation

Latest Topics