SYM GTS200 group

[GTSer]

Hello! Can anyone recommend a good servicing workshop for sym gts 200 in jb?

 

Please refer post#2254

[Hafizkjyxcvmkpl]

Thank you GTSer.

 

Btw, does anyone knows where i can purchase these?

[mudai]

Thank you GTSer.

 

Btw, does anyone knows where i can purchase these?

[ATTACH=CONFIG]329193[/ATTACH][ATTACH=CONFIG]329194[/ATTACH]

 

mah motor / weda 45 rowell road.

[langy]

hi all, din ride for 2 mths now batt no charge.

brought batt to neighboring workshop and claimed batt cant hold charge aft he tested an hr...quoted $128 new batt.

 

anyway to resuscitate the batt? Waz the standard price for gts200 batt?

[mudai]

hi all, din ride for 2 mths now batt no charge.

brought batt to neighboring workshop and claimed batt cant hold charge aft he tested an hr...quoted $128 new batt.

 

anyway to resuscitate the batt? Waz the standard price for gts200 batt?

 

hahahah they chop you... 65 already expensive... can get around 40.. depend on brand.. dont tell me they giv you dry battery

[langy]

dont think its a dry...so dry batt is ard 128?

[mudai]

dont think its a dry...so dry batt is ard 128?

Last time I check 90+

 

Sent from my SM-N910G using Tapatalk

[mudai]

dont think its a dry...so dry batt is ard 128?

Last time I check 90+

 

Sent from my SM-N910G using Tapatalk

[Ray Oliver Donovan]

Any Bro's selling off the meter cover (behind the windshield) & storage compartment (right hand side)?

 

Sent from my SM-N915G using Tapatalk

[MiloJay]

Seeking advise from bros here. My erp cashcard reader forgot to close cover. Rain went into it, now bike cannot start. Bring to bike shop will work? Or need to go vicom to get new reader?

[Isopropyl]

Seeking advise from bros here. My erp cashcard reader forgot to close cover. Rain went into it, now bike cannot start. Bring to bike shop will work? Or need to go vicom to get new reader?

 

try to disconnect the IU from the battery and see if that work.

[MiloJay]

try to disconnect the IU from the battery and see if that work.

 

I could try that. If it works, I just need to go to vicom to have the IU unit replaced right?

[MiloJay]

Thanks Isopropyl. Got my IU replaced successfully.

[Isopropyl]

Thanks Isopropyl. Got my IU replaced successfully.

 

sorry for the late reply. glad things work out well for you.

 

ride safe:D

[niao8899]

Guys!!! I want to sell my GTS 200.

Registration date : Aug 2009 (nice FBD 8x8x L plate)

COE Expires : Aug 2019

Road Tax : feb 2016

Mileage : 84k+

Fuel consumption : ~29km per litre

Asking price : $3800 (Negotiable after viewing)

Viewing location : Teck whye or CCK , evening or night.

 

 

Reason for selling changing car.

 

Contact 82222171

[leonardl]

Hi guys, just bought a 2nd hand gts200,

Notice there is a grinding sound below when

I rev to around 5.2k rpm and after 5.2k rpm i duno

If the sound disappear or if cover up by high reving sound. Any idea what issue?

 

And also i have read about rubber burning smell somewhere, whats the cause or is it a minor issue only

 

Scooter noob here, thks for advice!

[Isopropyl]

Hi guys, just bought a 2nd hand gts200,

Notice there is a grinding sound below when

I rev to around 5.2k rpm and after 5.2k rpm i duno

If the sound disappear or if cover up by high reving sound. Any idea what issue?

 

And also i have read about rubber burning smell somewhere, whats the cause or is it a minor issue only

 

Scooter noob here, thks for advice!

 

is the sound from the left side of the scooter? chance are it is from the CVT.

[kanglong88]

Thank bro will check with them the price , saw the pic from their fb but dated 2012 dunno they still selling or not.

 

Hi bro, did u manage to call 'Future Motoring'? I'm interested in the ferring too!

[test_machine]

Hi SYM bros,

My GTS 200 RPM meter not working. When riding under the hot sun or park under the hot sun the RPM meter works. But riding in the morning or night the RPM meter fail. Anyone having the same problem? Pls advice.

[MiloJay]

Hi bro, did u manage to call 'Future Motoring'? I'm interested in the ferring too!

 

For sometime, I have been interested in that. Heard it's called Alien Head. Asked around some places, they don't keep stock, and have to order from overseas and shipment takes few weeks. Future Scootering might give you same answer.

[MobyDog]

Just to check with you guys about labour charges that need to remove the front faring. I have changed headlame bulb before that sometimes need to remove the front faring and it cost about $12- 15. However, today my coolant container leaked, and the front faring also removed. This workshop at aljunied charged me $50 for labour, $50 for that plastic coolant $15 for coolant. Is that reasonable ?

 

I think we should start posting repair labour cost listing here - for All to.aware.

[MobyDog]

As my gts is ageing, i would expect quite a few repairs. I stay at toa payoh, and can anyone recommend any reasonably priced workshops you normally goes to? My current workshop at aljunied pricing is getting eratic. $50 for removal for front faring is crazy, i don't even bother to quarrel with him.. Don't want to get into a fight. Please help

[Isopropyl]

As my gts is ageing, i would expect quite a few repairs. I stay at toa payoh, and can anyone recommend any reasonably priced workshops you normally goes to? My current workshop at aljunied pricing is getting eratic. $50 for removal for front faring is crazy, i don't even bother to quarrel with him.. Don't want to get into a fight. Please help

 

we have a DIY group for SYM 200. Normally simple job like changing of light bulb or IU, servicing CVT, we will do it on our own.

 

for bigger job like changing cooling system, some of our guys will travel to SYM Malaysia.

[MiloJay]

Hi bro, did u manage to call 'Future Motoring'? I'm interested in the ferring too!

 

I asked Future Scootering. They don't carry / sell that alien head anymore.

 

If you need the original windshield, they can help you source for it.

[alibaba]

Hi everyone, I'm selling my 1 yr 6mths old SYM GTS 200 (FBJ ****C) due to my upgrade to 4 wheels. Bike manufactured on 2014, registered May 2014. Bought at ard $11,600. Willing to let go at $8,500. When i buy automobiles, i hope the dealers/sellers will be honest, so i will be an honest seller here as well.

 

Here's the Condition of the bike:

 

The current mileage is around 23000+km. Engine & all the mechanical & electrical components are good. Exterior now is however kinda little dirty with a few scratches and exhaust with some spot rust(i checked before, no issue, not need waste money to remove the rust). Engine oil changed at every 4000km ( no joke i abit kiasu), gear oil change at every 6000km. For engine oil i use motul 4T 10w40 ($33 per bottle - damm ex) and gear oil i use Total Hi-Perf Gear Oil 80w-90 ( bought 5litres bottles). Oils change i do it myself. Air filter, spark plug, belt & roller, U shoe, changed at 13,000km at the Official SYM Service Centre Nan Wah Motor Co. @ AMK Industrial estate there ( the boss is a friendly uncle can't remember his name). Tire & brake pads changed at 18,000km at same place. No accidents/crash before. Free 6 mths road tax (Road tax paid till May 16). Initially didn't want to sell as my plan was to utilise both the car & bike for different occasions. But i realised that i'm really not utilising the bike much or in fact not using it at all since having my car- had been sitting in the carpark for 1 month already, and once every week i have to go start the engine and let it run for a few minutes to prevent the engine from becoming 'cold'. The bike also includes a Kappa rear box and 2 givi side saddle bags ( abit dirty though).

 

The bike itself is a comfortable ride, especially good for long rides. Fuel consumption is very good imo ( full tank 12 litres i can go around 360km (+- 30km/L), i pump shell 98). Crusing speed is ard 80 to 120km/h (usually on expressway i'll maintain 100 to 110km/h which is comfortable). Acceleration is very responsive as well ( usually traffic light i will be the first to zoom off lol) It is easy to control & manoeuvre, just that becos it is a little bit wider than other bikes, when going in between cars requires slightly more skill which you will learn and get used to it as what i did. It is very reliable as well. Now what i didn't like much is the vibration of the engine - especially during pick up. But you will get use to it as well. I've also learnt a way to reduce and control the vibration of the engine by using the throttle ( i'll teach you ). For full specification of the bike i think you can easily find it online, so i won't be posting it here.

 

PM me for more details. Both individuals & dealers welcome. Thanks.

Edited November 30, 2015 by alibaba