[Group] YAMAHA Fazer

[jack_knight]

hi guys out there,

 

i currently riding FZ 1000cc and i am interest in puting the Fazer 600cc hander bar with the cover mount to the bar..

 

How much will that be? Hope you guys can understund which part i am refering to ...

 

THanks

[stwb1981]

Roget tat vanselle.....

nw i get the whole pic...

pai say....

 

yup apply to FI bike only rite...?

will be very useful ...

nt forgetting the velocity stacks...

[vanselle]

the plates are so much smaller compared to the OEMs

 

Roget tat vanselle.....

nw i get the whole pic...

pai say....

 

yup apply to FI bike only rite...?

will be very useful ...

nt forgetting the velocity stacks...

 

Yup,

so with the Throttle Plates + Air box mod + Air filter + PC III,

Throw in the De CAT + Exhuast

 

Fazer sld be a better bike liao, with no complaint on poor respond or what.

[rockeuez]

Hi Bros,

 

Looking for Fazer 600N.

 

Pls kindly call me at 93364319 or pm me.

 

Thank you very much and Have a nice day!

[dolf]

Yup,

so with the Throttle Plates + Air box mod + Air filter + PC III,

Throw in the De CAT + Exhuast

 

Fazer sld be a better bike liao, with no complaint on poor respond or what.

 

..jus watin for my Arrow can and I should hope for that result bro

[SiaoSter]

..jus watin for my Arrow can and I should hope for that result bro

 

 

wootz! another arrow fan !

[vanselle]

good stuffs are meant to be shared...

btw, u know when the scott oiler e-system when arriving? motoWorld right? or u know where cheaper?

 

I dun think the e-system will arrive here so fast leh. Maybe will take another 2-3 mths ba..

And dun ever thing of getting from oversea, cause is Damm ex.. i chk liao.. ahahhaa

[SiaoSter]

I dun think the e-system will arrive here so fast leh. Maybe will take another 2-3 mths ba..

And dun ever thing of getting from oversea, cause is Damm ex.. i chk liao.. ahahhaa

 

 

oh man if thats the case, coming to sg will be slightly lesser than direct purchase from overseas but still flall under the "ex" catogary eh

[Chubb]

gen 1 bro, may i know wat e tire pressure for gen1?

 

izzit f/36psi, r/42psi?

[pichudot]

I dun think the e-system will arrive here so fast leh. Maybe will take another 2-3 mths ba..

And dun ever thing of getting from oversea, cause is Damm ex.. i chk liao.. ahahhaa

 

yo bro and everyone else who is interested,

 

i jus pop by MW jus now... chatted with fauzi... e-system will come in roughly end of this month or beginning or next month... pricing wise... £199 lo... which SGD459.93... i give it SGD470 ba... alamak... pocket sure 100% broken!

 

bro, wad's ya comment on this compared to acumen intelligent chain oiler? wanna know...

[dolf]

Hi guys,I saw 3 guys ridin Fazer6 at the 2nd link ,Malaysian checkpoint ,at about 8am on Sunday (Hari Raya), any of them from this forum?

[vanselle]

yo bro and everyone else who is interested,

 

i jus pop by MW jus now... chatted with fauzi... e-system will come in roughly end of this month or beginning or next month... pricing wise... £199 lo... which SGD459.93... i give it SGD470 ba... alamak... pocket sure 100% broken!

 

bro, wad's ya comment on this compared to acumen intelligent chain oiler? wanna know...

 

Ya, tt's the price tt i'm referring to. ahahahha

 

To me,

both are electronic chain lubrication system.

Outlooks - Scott win, the multi function display is so cool with blue led backlight.

Function - Both same.

Fefill - Acumen less messing, cause is a direct replace.

Fefill cost - Scott cheaper.

Spare parts - Scott ( Spare parts is easy to find ).

Dual Header - Scott have, dun noe Acumen have a not.

Price - Acumen Cheaper.

Feedback = Heard that scott a lot of problem with the oil reservoir.

 

So if you are looking for a electronic chain lubrication system and just want to get your chain lub at a lower cost = Get Acumen

 

If u are looking for a electronic chain lubrication system, go for the looks and dun mind pocket to burn a big hole = Go for Scott.

[DeusExMachina]

fugly or not, I rather spend the dough on the oem bellypan + eom sports scoop.. looks freaking awesome..

 

Yes. The sports scoop and bellypans are awesome!

 

You wanna mass order the scoop? Freakin' expensive man, from Yamaha Canada.

 

http://i175.photobucket.com/albums/w156/jlewis02/Yamahasportscoop.jpg

 

 

This is one of the cosmetic pieces on my list. How?

 

https://www.yamahagenuineparts.com/Motorcycle/moreinfo.asp?ID=1007&shopcat=accessories&Class=Sport%20Bike&Year=2009&Model=FZ1

Edited September 24, 2009 by DeusExMachina

[DeusExMachina]

Hi ALl,

As mention, below is the pic.

 

OEM Plates

http://i292.photobucket.com/albums/mm14/Vanselle/my%20pic/DSC00922.jpg

 

http://i292.photobucket.com/albums/mm14/Vanselle/my%20pic/DSC00923.jpg

 

AFtermarket Plates

http://i292.photobucket.com/albums/mm14/Vanselle/my%20pic/DSC00926.jpg

 

http://i292.photobucket.com/albums/mm14/Vanselle/my%20pic/DSC00929.jpg

 

Smaller resulting in more air intake and bike respond better.

 

** You must mod your air box, change a air filter + PC III before you change to this**

 

Ahh.. you're talking about this throttle plate... aka the secondary butterfly?

I tht you were talking about those fast throttle adapters which reduce your twist angle.

 

Some ppl suggested removing it entirely, leaving only the main in place.

[dolf]

Hi Fazer bros,does anyone know the Torque and BHP difference between a stock FZ1 and one with say an air box mod,DNA/BMC/K&N,wire re-route,end can,de-cat,sub-throttle plates mod,PC3/5 + dyno tune,AIS block off?

Does a 16t increase the Torque and BHP figures in the low to mid-range?

What's the increase in consumption like when using a 16t?

These are just some questions on my mind that I hope you guys can help me with:cry: and especially from a local point of view..

[Ridox]

Other than the tank oxidation which is pissing me off, my FZ1 has a very abrupt throttle response..better than my carb 98 R1 but the Fazer 3500rpm is really sluggish....so hard to move off the line. The bike's powerband is good from 3500 to redline...but the FC is from 13km/l to 18km/l at best. Makes me wonder where the fuel went for just 150hp......Also does any of u guys have a strange surge when u release the last portion of the clutch, once fully released the surging stops..hard to be smooth when changing gears at times.

[vanselle]

Hi Fazer bros,does anyone know the Torque and BHP difference between a stock FZ1 and one with say an air box mod,DNA/BMC/K&N,wire re-route,end can,de-cat,sub-throttle plates mod,PC3/5 + dyno tune,AIS block off?

Does a 16t increase the Torque and BHP figures in the low to mid-range?

What's the increase in consumption like when using a 16t?

These are just some questions on my mind that I hope you guys can help me with:cry: and especially from a local point of view..

 

Wow,

i can only help wif the 16T, it will only help on the pick up. Faster pick up, will noy affect your Fuel Comsumption.

Unless u talking bout Motor GP Style pick up.. AHHAhaha

[vanselle]

Other than the tank oxidation which is pissing me off, my FZ1 has a very abrupt throttle response..better than my carb 98 R1 but the Fazer 3500rpm is really sluggish....so hard to move off the line. The bike's powerband is good from 3500 to redline...but the FC is from 13km/l to 18km/l at best. Makes me wonder where the fuel went for just 150hp......Also does any of u guys have a strange surge when u release the last portion of the clutch, once fully released the surging stops..hard to be smooth when changing gears at times.

 

You can solve that by installing Ivan's FCE.

[jazz_25]

hi, does anyone know for those customized brackets that seng kwang makes for Gen 1 Fazer 1000, do they do any cutting to the bike or will it be a direct fit onto the bike after remove the rear handlebars? thanks!

[Intruder]

HD = Harely Davidson Softail classic....

very chio & nice my style...

aft sold my 12r ...

i rode rxz planning save $$ mah to buy my HD...

but itchy throttle hand ...

i gt a fazer...

nv regret though....

buy many accessories for her ...do up nice nice...

still a bike wif the req power & the coinvience of boxes...

i more than a happy man....

but still if gt the chance will go 4 a HD definetly!!!!

 

HD, way to go! This class of iron horse is about life style. Long to own one, but got pull back when future planning requires. Potato sound now almost not an entitlement to the new Gen of HD... Now sounds like sewing machine... though aft some aftermarket tuning boost the music. It is all depend ones taste to ride a HD. The big twins owns it's unique cranks. Nice

[Naked1]

gen 1 bro, may i know wat e tire pressure for gen1?

 

izzit f/36psi, r/42psi?

 

Shld be the same as gen 2.. 36-42.

[SiaoSter]

hi, does anyone know for those customized brackets that seng kwang makes for Gen 1 Fazer 1000, do they do any cutting to the bike or will it be a direct fit onto the bike after remove the rear handlebars? thanks!

 

 

as far as i know seng kwang will custom brackets not at the expense of your bike

[pichudot]

Hi guys,I saw 3 guys ridin Fazer6 at the 2nd link ,Malaysian checkpoint ,at about 8am on Sunday (Hari Raya), any of them from this forum?

 

is it 1 fz6s with orange tank bra, LV pipe + 1 fz6n with LV pipe + 1 fz6s with side panniers + super big head cowl? LOL~!

if all fits, guess it's us... hahaha! btw if i didn't recognized u wrongly, i think we saw u... y u wait at the closed custom counter? where r u heading anyway?

Edited September 25, 2009 by pichudot

[pichudot]

Ya, tt's the price tt i'm referring to. ahahahha

 

To me,

both are electronic chain lubrication system.

Outlooks - Scott win, the multi function display is so cool with blue led backlight.

Function - Both same.

Fefill - Acumen less messing, cause is a direct replace.

Fefill cost - Scott cheaper.

Spare parts - Scott ( Spare parts is easy to find ).

Dual Header - Scott have, dun noe Acumen have a not.

Price - Acumen Cheaper.

Feedback = Heard that scott a lot of problem with the oil reservoir.

 

So if you are looking for a electronic chain lubrication system and just want to get your chain lub at a lower cost = Get Acumen

 

If u are looking for a electronic chain lubrication system, go for the looks and dun mind pocket to burn a big hole = Go for Scott.

 

tough decision...

but thanks bro for the write up...

[SiaoSter]

is it 1 fz6s with orange tank bra, LV pipe + 1 fz6n with LV pipe + 1 fz6s with side panniers + super big head cowl? LOL~!

if all fits, guess it's us... hahaha! btw if i didn't recognized u wrongly, i think we saw u... y u wait at the closed custom counter? where r u heading anyway?

 

 

woo so many LV fans !