[Group] YAMAHA Fazer

[DeusExMachina]

My cousin had the problem. He also has an 06 Fazer. He got it a year b4 me and told me that I would have the same problem the day I rolled my bike out.

 

Damned was he ever right.

[E.M.F]

My cousin had the problem. He also has an 06 Fazer. He got it a year b4 me and told me that I would have the same problem the day I rolled my bike out.

 

Damned was he ever right.

 

And now its my turn. Something must have been faulty with the fork oil squirting machines in the Japan Yammy factory. They are not ejaculating evenly.

[pichudot]

little explanations here:

 

hey bros, for those who asked where is the new fz6 thread, "[Group] Yamaha FZ6", apology to forget to update everyone, it had been closed and combined together into "[Group] YAMAHA Fazer" due to the existing number of fazers threads being current active...

 

also, like in "Fazer 600 Reviews" thread, it was closed by one of the mods due to unrelated discussions other than fz6 reviews...

 

hope this explains...

[jairz]

little explanations here:

 

hey bros, for those who asked where is the new fz6 thread, "[Group] Yamaha FZ6", apology to forget to update everyone, it had been closed and combined together into "[Group] YAMAHA Fazer" due to the existing number of fazers threads being current active...

 

also, like in "Fazer 600 Reviews" thread, it was closed by one of the mods due to unrelated discussions other than fz6 reviews...

 

hope this explains...

 

FZ1 or FZ6 we are still Fazer family. Whahahaha! Cheers!

[SiaoSter]

yeah lo, i think its best to maintain only one fazer thread, naked bike section got one, sports touring section also got one haa

 

 

oh man today haze is damn power...

[pichudot]

FZ1 or FZ6 we are still Fazer family. Whahahaha! Cheers!

 

yeah lo, i think its best to maintain only one fazer thread, naked bike section got one, sports touring section also got one haa

 

 

oh man today haze is damn power...

 

yup yup... aiya at 1st one mod told me he's going to close that down, tell me i can go open a new one... then another mod told me too many thread, had to close that too, thus had to combine it together...

 

anyway, i'm fine with together! we're a family!

 

btw, how come today so many haze ah? i tot going to rain! damms...

[SiaoSter]

yup yup... aiya at 1st one mod told me he's going to close that down, tell me i can go open a new one... then another mod told me too many thread, had to close that too, thus had to combine it together...

 

anyway, i'm fine with together! we're a family!

 

btw, how come today so many haze ah? i tot going to rain! damms...

 

 

seriously i dono man....why no one is prohibiting the burning of forestation..its causing air pollution all the way to our country man....today practically u can see blur visions

[jairz]

bad air condition. haiz... den earth quake and tsunami hitting so many areas... haiz...

[dolf]

Woohoo... just modded my throttle bodies. $21 and 3 1/2 hr,damn shack SIA!

[pichudot]

yo guys,

as requested, here's the rough idea of limbat's ctek battery charger...

 

 

it can be directly plug into any wall socket,

 

http://img28.imageshack.us/img28/1668/29092009324.jpg

 

and you just need to pull the charger to your socket,

 

http://img71.imageshack.us/img71/8208/29092009325.jpg

 

power on the unit,

 

http://img97.imageshack.us/img97/763/29092009323.jpg

 

and plug it to the correct hole! i mean the socket indicator la...

 

http://img28.imageshack.us/img28/530/29092009322.jpg

 

 

limbat is carrying i think 3 types of charger i think, one is 800, another is 3600 and 7000... 800 is basically for slow motorbikes charging with only 1 mode selection, it would take you 8 freaking hours to charge a battery! 3600 (the one i have) is for many types of vehicles, charging is 3-4 times faster than 800... imagine... no need to say about 7200 ba...

 

basically, all you need is to install the battery socket directly onto your battery... charging will not harm any of your electrical devices... limbat carries 4 types of sockets, the normal one with no indicator (comes with the charger), the clip type socket (comes with charger too, mainly used for cars), the indicator eyelet (looks like normal one but with battery indicator) and indicator panel (shown in my picture above)...

 

indicator indication indicates (kns the slag!) the battery level in healthy (green led), advised to charge (amber led) and warning (red led)... indicator are kinda layman explanation ba... no need further explanation right?

 

for indicator eyelet, u can route the wire and keep it underneath your seat (like limbat himself)... for indicator panel, it's advisable to install it onto your dash board like my picture... it's only a 1 time installation, once you installed, there's no need to remove unless you wanna take it out...

 

any further questions?

 

by the way, the necessary information could also be gotten from the below link...

http://www.ctek.com/EN-US/Default.aspx

 

XS 800 Battery Charger

MULTI XS 3600

MULTI XS 7000

 

Indicators

 

Hang your Charge onto the Wall?

[pichudot]

btw, i think i should leave the professional explanation to mr lim... go visit him for free discussions when you required! hahaha!

[pichudot]

bros, i found out it's really the check valve thingy issue... it's not installed! that's y my oil leak out from the nozzle like no one's business! made me lost 60ml of oil over 1 freaking 24 hours! :faint:

 

anyway, the eSystem fanatics, please make sure your check valve thingy is installed between the pump and the hose... it's the little white thingy near my little black extreme box below...

 

http://img4.imageshack.us/img4/8223/30092009326.jpg

 

btw, he go tie the hose to my rear suspension... :faint: wonder where you guys route your hose to?

 

http://img62.imageshack.us/img62/485/30092009327.jpg

 

also, he route the hose outside of that little plastic chain guard... is it suppose to be like that?

 

http://img62.imageshack.us/img62/649/30092009328.jpg

 

lastly, the install guide says the nozzle should face out... he go put the nozzel face in... are yours like that too?

 

http://img17.imageshack.us/img17/7474/30092009329.jpg

[jairz]

yo guys,

as requested, here's the rough idea of limbat's ctek battery charger...

 

 

it can be directly plug into any wall socket,

 

http://img28.imageshack.us/img28/1668/29092009324.jpg

 

and you just need to pull the charger to your socket,

 

http://img71.imageshack.us/img71/8208/29092009325.jpg

 

power on the unit,

 

http://img97.imageshack.us/img97/763/29092009323.jpg

 

and plug it to the correct hole! i mean the socket indicator la...

 

http://img28.imageshack.us/img28/530/29092009322.jpg

 

 

limbat is carrying i think 3 types of charger i think, one is 800, another is 3600 and 7000... 800 is basically for slow motorbikes charging with only 1 mode selection, it would take you 8 freaking hours to charge a battery! 3600 (the one i have) is for many types of vehicles, charging is 3-4 times faster than 800... imagine... no need to say about 7200 ba...

 

basically, all you need is to install the battery socket directly onto your battery... charging will not harm any of your electrical devices... limbat carries 4 types of sockets, the normal one with no indicator (comes with the charger), the clip type socket (comes with charger too, mainly used for cars), the indicator eyelet (looks like normal one but with battery indicator) and indicator panel (shown in my picture above)...

 

indicator indication indicates (kns the slag!) the battery level in healthy (green led), advised to charge (amber led) and warning (red led)... indicator are kinda layman explanation ba... no need further explanation right?

 

for indicator eyelet, u can route the wire and keep it underneath your seat (like limbat himself)... for indicator panel, it's advisable to install it onto your dash board like my picture... it's only a 1 time installation, once you installed, there's no need to remove unless you wanna take it out...

 

any further questions?

 

by the way, the necessary information could also be gotten from the below link...

http://www.ctek.com/EN-US/Default.aspx

 

XS 800 Battery Charger

MULTI XS 3600

MULTI XS 7000

 

Indicators

 

Hang your Charge onto the Wall?

 

Lost... Whahahaha. think i too noob for this already.... Whahahaha.

[a n d y]

Hi. Anyone knows where to get a bangster tank bra at a cheap price.? Was quoted 165 by MW. Anywhere gt cheaper than that.?

[pichudot]

Lost... Whahahaha. think i too noob for this already.... Whahahaha.

 

i'm also a noob bro... there are lots of pros, amateur and old birds out there...

 

 

Hi. Anyone knows where to get a bangster tank bra at a cheap price.? Was quoted 165 by MW. Anywhere gt cheaper than that.?

 

bro, if u ok wif brand-less, try auntie shop... it's her signature auntie brand...

but hor, let me jus give u a little tip up... the make is 100% obviously not better than bagster...

 

pactically to say, this amount of monie give you this amount of quantity...

you give peanuts, you get monkeys...

[Yatz86]

bros, i found out it's really the check valve thingy issue... it's not installed! that's y my oil leak out from the nozzle like no one's business! made me lost 60ml of oil over 1 freaking 24 hours! :faint:

 

anyway, the eSystem fanatics, please make sure your check valve thingy is installed between the pump and the hose... it's the little white thingy near my little black extreme box below...

 

http://img4.imageshack.us/img4/8223/30092009326.jpg

 

btw, he go tie the hose to my rear suspension... :faint: wonder where you guys route your hose to?

 

http://img62.imageshack.us/img62/485/30092009327.jpg

also, he route the hose outside of that little plastic chain guard... is it suppose

to be like that?

 

http://img62.imageshack.us/img62/649/30092009328.jpg

 

lastly, the install guide says the nozzle should face out... he go put the nozzel face in... are yours like that too?

 

http://img17.imageshack.us/img17/7474/30092009329.jpg

 

same route of installation as mine...

[fz6n s1]

Wad happen to d new fz6 thread?

[dolf]

hi bro, can I check with you guys which shop I should go if i want to mod my airbox?

 

hi bro,I asked many shops if they did that and all said no, so best if you do it yourself plus it's free that way:P

[a n d y]

Ohya. I'm thinking of installing crash bar on my fz6n. hmm. Wat u guys think of it.? I kinda scare i'll scratch the engine cover or wat. Wanna protect it. Is $220 a reasonable price.?

http://www.teamhklracing.com/images/access/804a.jpg

[SiaoSter]

bros, i found out it's really the check valve thingy issue... it's not installed! that's y my oil leak out from the nozzle like no one's business! made me lost 60ml of oil over 1 freaking 24 hours! :faint:

 

anyway, the eSystem fanatics, please make sure your check valve thingy is installed between the pump and the hose... it's the little white thingy near my little black extreme box below...

 

http://img4.imageshack.us/img4/8223/30092009326.jpg

 

btw, he go tie the hose to my rear suspension... :faint: wonder where you guys route your hose to?

 

http://img62.imageshack.us/img62/485/30092009327.jpg

 

also, he route the hose outside of that little plastic chain guard... is it suppose to be like that?

 

http://img62.imageshack.us/img62/649/30092009328.jpg

 

lastly, the install guide says the nozzle should face out... he go put the nozzel face in... are yours like that too?

 

http://img17.imageshack.us/img17/7474/30092009329.jpg

 

 

 

yes mine is the same as yours , intialy he also cable tie it to my spring of my rear shock , i told him to cut if off, lessen the slack of the tube beside the spring, LESSEN not totally remove the slack by pulling it upwards towards the seat SLIGHTLY. and ur hose will run nicely beside your rear shock, don have to worry about ur hose snapping as it is not in the same damping motion of your rear shock, morever the spring of the rear shock do not have any sharp edges to cause scratches to the tube

[Turbo08]

Hi

 

Will be collecting my FZ1N early next week. First accessories I want to add is a half tank cover.

 

May I know where can I get one? The picture below is of the one from Targa. Am open to other brand so long the fitting is good.

 

hi bro, did u manage to get the tank cover or anyone else manage to get it ?

[Awin]

bro, if u ok wif brand-less, try auntie shop... it's her signature auntie brand...

but hor, let me jus give u a little tip up... the make is 100% obviously not better than bagster...

 

pactically to say, this amount of monie give you this amount of quantity...

you give peanuts, you get monkeys...

 

went to mw and was informed da bagster tankbra will be arrivin in 2 mths time. minimum deposit $50.

[piggyback1974]

hehehe...

 

wow bro pichudot, i can see your 'FrilledliZard6 really armed to the teeth.

[vanselle]

Woohoo... just modded my throttle bodies. $21 and 3 1/2 hr,damn shack SIA!

 

You DIY?? or you ask someone to do for you?

[maxxmadness]

Let's ride!

http://www.pantip.com/cafe/blueplanet/topic/E8338875/E8338875.html

 

http://www.pantip.com/cafe/blueplanet/topic/E8369926/E8369926.html

 

wah uncle, although i can speak a little of thai, that doesnt mean i can read thai...