[Group] HYOSUNG Comets

[Phantom Hellfire]

u can adjust performance. u can use aftermarket parts as well. however, aftermarket parts wont last long. if u do use aftermarket parts, keep the stocks in case anythinG happens.

 

Bro where to go to adjust performance... and is there any place for aftermarket parts... Any recommendation?

[SC Gaban]

Bro where to go to adjust performance... and is there any place for aftermarket parts... Any recommendation?

 

ive got some exp for my pulsar, however i havent tried for the blade. in my exp, if u r confident about changing to aftermarkets, by all means, go ahead, other than that, better stick to stock engines. exterior mods r absolutely no problems.

[SC Gaban]

i transfered my saddle bag from my pulsar to the blade. took a ride with it. so far so good.

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs187.snc4/37693_10150223709080106_501115105_13548085_2194347_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs167.snc4/37693_10150223709075106_501115105_13548084_107915_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs087.ash2/37693_10150223709065106_501115105_13548082_2944873_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs167.snc4/37693_10150223709070106_501115105_13548083_6133807_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs167.snc4/37693_10150223709060106_501115105_13548081_2997285_n.jpg

[yinghai]

95kph top speed?? Check your carb.. I open up my carb and the jets are fully submerge in rust.. These bikes rust damm fast..

[Phantom Hellfire]

i transfered my saddle bag from my pulsar to the blade. took a ride with it. so far so good.

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs187.snc4/37693_10150223709080106_501115105_13548085_2194347_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs167.snc4/37693_10150223709075106_501115105_13548084_107915_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs087.ash2/37693_10150223709065106_501115105_13548082_2944873_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs167.snc4/37693_10150223709070106_501115105_13548083_6133807_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs167.snc4/37693_10150223709060106_501115105_13548081_2997285_n.jpg

 

Bro... where you got those saddlebags... i want to get one too... for work it looks convenient... is it suitable for heavy stuffs?

[SC Gaban]

Bro... where you got those saddlebags... i want to get one too... for work it looks convenient... is it suitable for heavy stuffs?

 

ah boy kelatan, selling around 140. how heavy is ur stuff? i can fit my full face inside the bag. installation wise, u have to diy urself.

Edited July 14, 2010 by SC Gaban

[Phantom Hellfire]

ah boy kelatan, selling around 140. how heavy is ur stuff? i can fit my full face inside the bag. installation wise, u have to diy urself.

 

serious? ok later i drop by ah boy... i just want to pu my helmet, safety helmet, some documents, notebook, camera... etc...

[SC Gaban]

serious? ok later i drop by ah boy... i just want to pu my helmet, safety helmet, some documents, notebook, camera... etc...

 

plse note, its not 100 water proof, only splash proof. however, it dries fast. been using the bag for almost 3 years now. u can put ur helmet, it comes with a small key lock. but it will look funny la, one sided big, the other side small. the bag can expand. below is the example of the bag. taken from selangor trip last year.

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs209.snc1/7631_306070985105_501115105_9340209_7643652_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs229.snc1/7631_306071000105_501115105_9340210_3569818_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs499.snc3/27231_10150161270755106_501115105_11786450_2799323_n.jpg

 

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs499.ash1/27231_10150161270740106_501115105_11786448_5200846_n.jpg

[flealancer]

95kph top speed?? Check your carb.. I open up my carb and the jets are fully submerge in rust.. These bikes rust damm fast..

 

alright.

yeap. yesterday managed a 100km/hr but the bike's sound was like shouting in pain man.

maybe this upcoming Monday or what I'll go get carburetor serviced.

[flealancer]

no i didnt go cos too exhuasted from the pontian trip. woke up at 6.30pm sun. the shop opens around 10am till 7pm, unlike ah gua lane.

 

oh.

maybe next time i should follow you.

why not you organize a trip for the cometers here to JB ?

[SC Gaban]

oh.

maybe next time i should follow you.

why not you organize a trip for the cometers here to JB ?

 

di sat morning wana go? around 9-10am.

[yinghai]

Okaes, my comet is quite old already, im planning to convert the vacuum fuel pump back to electric fuel pump, anyone knows where can u get 12v fuel pump 3.5psi max.. And fuel regulator as well..

[SC Gaban]

Okaes, my comet is quite old already, im planning to convert the vacuum fuel pump back to electric fuel pump, anyone knows where can u get 12v fuel pump 3.5psi max.. And fuel regulator as well..

 

how old is ur bike? u can try ahboy. the 'bikers parts n accesories paradise' well, sort of. btw, maybe 2night will be going up to KL. c how first.

[SC Gaban]

very short review on my 2nd hand gt250.

 

FBA plate ( 4year old)

mileage when i first got the bike: 41000km.

things replaced when i fist got it: stock spocs front and back, x-ring chain (SGD$160), 2 ngk CR9EIX plugs, oil filter, 1.6litres of agip engine oil.

 

 

the pickup/acceleration wasnt that powerful, but its beter than my pulsar. (duh!) however, the sound of the engine and exhaust is damn smooth for a 2nd hand bike. i rode it quite a

while then i heard a sound coming from below when engaging 5th gear. i went back to the shop and told the mech abt the issue. i tot it was the bearing problem, but the mech tested

and told me it was the x-ring, due to the bigger diameter size, it produces that sound. theres another issue about the front and rear brakes. it looks almost worn off, however, the

mech adjusted both and now should be ok. also, the wirings. thats settled too. both tyres are new battlaxs, so im happy. (no change in tyres needed). clutch wise, i often get a neutral

whenever engage 2nd gear, and hard to get a neutral whenever i stop at trafic or carparks, it reminds me of my pulsar. riding along the heavy traffic

from changi rd towards kelantan lane, it was tiring, the sitting posture is not my type, cos im slightly smaller size. need to get used to it though. the same day, evening, i test ride it

on the malaysian north south highway via 2nd link, tuas. wow, its my first time traveling with this bike, pumped 120-130km/h,(rpm 8-9k) its increadibly smooth!! the next day, i went a short

trip to pontian with my fellow pulsarians. riding around 70-80km/h, ...its tiring. both my hands are numb. so i had to pump 110-120km/h for a short while. happy dat nothing bad happen dat day.

 

so far, theres no big issues on the bike ....yet. im glad that the first owner took good care of the bike eventhough the mileage is 41000k. ok, dats all for now. thnx for reading.

[makindue]

For me Varadero 125 is a good bike. My brother is using his Varadero 125. I will capture some photos of it sooner.

[SC Gaban]

For me Varadero 125 is a good bike. My brother is using his Varadero 125. I will capture some photos of it sooner.

 

i totaly agree, vara 125 is a gd bike, i wont deny it. however, due to its europeasnism, the bike and the parts are exp for a 125cc.

[yinghai]

Scgaban, you need more power u can adjust the carb..

[yinghai]

Any street legal exhaust for this bike??

[yinghai]

Flealancer.. Do inform me if your problem is solve..

[flealancer]

di sat morning wana go? around 9-10am.

 

paiseh.

just now and next saturday I've exams

weekdays tough ah ?

[flealancer]

Flealancer.. Do inform me if your problem is solve..

 

maybe monday i go service carb.

u know where cheap to service ?

[SC Gaban]

Any street legal exhaust for this bike??

 

u can enquire lta abt d exhaust.

[SC Gaban]

17 july, went to jb to find a NAZA shop. its located along danga bay just after proton showroom.

 

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08400.jpg

 

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08401.jpg

 

unfortunately, they dont sell 125cc bikes nor the parts, only 250 and 650. the worst thing is they dont even know that 125cc exists. wat comes to a shock to me is that for 250 and 650, they have to order the parts from KL cos its very expensive. the monoshock suspension itself cost around RM600+. i was so disapointed and left. so much for high expextations. i immediately cancelled my plan for cutting my hair wshing my bike there (lost hope, hehehe) and went back to sg.

 

decided to call up phantom hellfire to meet up at heng motors.he wanted to service his carb cos his trottle response was damn slow. i was thinking it might be the cable, or something blocking the air inside the carb. the mech at heng said to let the bike stay there for a day or 2 but PH(phantom hellfire for short) didnt want to. so we had an unofficial kopi session and chatted until around 3+pm, then both of us went to HCL.

 

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08402.jpg

 

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08404.jpg

 

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08403.jpg

 

[img]http://i674.photobucket.com/albums/vv109/Gaban84/DSC08405.jpg[/img]

 

the mech at HLC explained to us that the carb had a leak and needs to be replaced. so he replaced both carbs. so after replacing, tuning here and testings there, finally PH got his bike up n running in the afternoon.

 

THE 'NOS SYSTEM' :lol:

 

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08406.jpg

 

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08408.jpg

 

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08409.jpghttp://i674.photobucket.com/albums/vv109/Gaban84/DSC08407.jpg

 

the 125 and the 250 looks pretty similar no?

 

that night we went to jb for accessories window shopping and makan. i was freaking tired and sleepy that night but can manage. we went back home around 3+am.

[c4ble]

Hi Gaban, I never had any problems with neutral or 2nd gear on my 250. Try getting your clutch cable adjusted.

[SC Gaban]

Hi Gaban, I never had any problems with neutral or 2nd gear on my 250. Try getting your clutch cable adjusted.

 

ok thnxs bro. i think i'll change the clutch cable, or the clutch plates? how much roughly it costs?