Looking for CBR 918/919 Riders

Sev · January 15, 2008

I try before but find abit high for me.. I most prob stick to sportbikes.. But i will use my wave to try the track..

you look tall, XR400 also too high for yo ar?

i tried XR200 before, quite low, suite for short people like me.

but 4 strokes, not much power, just ride for fun can liao.

may be going ah chong ask him got any de-register scramble for sales or not.

keep at track and ride there only.

GRassCuTTeR · January 15, 2008

haha, when you come to singapore again?
cannot keep too long, my wife clearing the room for new year, so throw a lot of things...

LinW you want the manual?

ahah... maybe in april i guess... still long way to go.. ask her dont throw away 1st mah.. hehe

GRassCuTTeR · January 15, 2008

hmm Sev.. come to think of it... very nice if can just keep a deregistered XR2/XR4 at the track.. but wat to do when the bike needs to be serviced or if it breakdown... how to send to the workshop ?

Sev · January 15, 2008

ahah... maybe in april i guess... still long way to go.. ask her dont throw away 1st mah.. hehe

ok lah, then i keep for you until you come to singapore.

for servicing a track used bike, need to transport it with lorry.

call tow truck truck tow to bikeshop then tow back. think cost $40 for 2 ways.

normal servicing like changing oil can DIY mah. last time i rode TZR125, change oil, wash cab, spark plug all DIY under HDB block...

GRassCuTTeR · January 15, 2008

ok lah, then i keep for you until you come to singapore.

for servicing a track used bike, need to transport it with lorry.
call tow truck truck tow to bikeshop then tow back. think cost $40 for 2 ways.

normal servicing like changing oil can DIY mah. last time i rode TZR125, change oil, wash cab, spark plug all DIY under HDB block...

thanks alot bro...

anyway this my current bike pic.. already converted to msia reg number

http://i53.photobucket.com/albums/g43/FireBLade9282/KIF_2513.jpg

yup.. for a single cylinder bike quite easy to DIY.. unless want do top overhaul then need ah chong to do to it... hmm $40 bux for 2 way transport.. dats cheap.. so big things like changing tyres.. wont be that hard either (more affordable)

Aalex82 · January 15, 2008

you look tall, XR400 also too high for yo ar?
i tried XR200 before, quite low, suite for short people like me.
but 4 strokes, not much power, just ride for fun can liao.

may be going ah chong ask him got any de-register scramble for sales or not.
keep at track and ride there only.

is the camera angle..

that y u think i tall..

i juz 1.74m tall..

Sev · January 15, 2008

thanks alot bro...
anyway this my current bike pic.. already converted to msia reg number
http://i53.photobucket.com/albums/g43/FireBLade9282/KIF_2513.jpg

yup.. for a single cylinder bike quite easy to DIY.. unless want do top overhaul then need ah chong to do to it... hmm $40 bux for 2 way transport.. dats cheap.. so big things like changing tyres.. wont be that hard either (more affordable)

wah, you got lobang to convert sin plate to m'sia plate ar?

can keep it for life, good sia.

spent a lot money to do so?

Aalex82 · January 16, 2008

thanks alot bro...
anyway this my current bike pic.. already converted to msia reg number
http://i53.photobucket.com/albums/g43/FireBLade9282/KIF_2513.jpg

yup.. for a single cylinder bike quite easy to DIY.. unless want do top overhaul then need ah chong to do to it... hmm $40 bux for 2 way transport.. dats cheap.. so big things like changing tyres.. wont be that hard either (more affordable)

U still using the bike but onli change the bike registeration? Oso mean export to malaysia and dereg in sg?

GRassCuTTeR · January 16, 2008

actually not lobang lor... i spent a big load of cash to get it done...

first, i bought a msia reg CBR9 for RM34k... then i did cross transfer all the aftermarket parts/fairings/suspension/subframe, etc etc... wat i retained on the msia bike was the engine only.. which i did a top overhaul to with new valves, seals, valve seals, gaskets etc etc... summore i put on 954 front USD fork, calliper n wave discs and new aluminium rim.. cost me a bomb..

the leftover parts from the msia bike, i fixed onto my sg bike and sold it off for about sgd4k to cover my costs... gave the buyer a full system + ohlins rear shock.. the owner also stay in GP town..

i think total came to about RM50k for it... damnit can almost buy a new K7 1000 in sg liau... but as Sev said, can keep for life... ahah..

besides, the 1st owner on the bike stated in the log card was Jalani Sidek.. (the Sidek brothers who won the badminton thomas cup in the 90's) hehe...

Sev · January 16, 2008

actually not lobang lor... i spent a big load of cash to get it done...

first, i bought a msia reg CBR9 for RM34k... then i did cross transfer all the aftermarket parts/fairings/suspension/subframe, etc etc... wat i retained on the msia bike was the engine only.. which i did a top overhaul to with new valves, seals, valve seals, gaskets etc etc... summore i put on 954 front USD fork, calliper n wave discs and new aluminium rim.. cost me a bomb..

the leftover parts from the msia bike, i fixed onto my sg bike and sold it off for about sgd4k to cover my costs... gave the buyer a full system + ohlins rear shock.. the owner also stay in GP town..

i think total came to about RM50k for it... damnit can almost buy a new K7 1000 in sg liau... but as Sev said, can keep for life... ahah..
besides, the 1st owner on the bike stated in the log card was Jalani Sidek.. (the Sidek brothers who won the badminton thomas cup in the 90's) hehe...

wah! you really spent a lot of money sia!!

haha, rasik sidek's brother bike ar? ride liao play badminton got better or not?

Sev · January 16, 2008

actually not lobang lor... i spent a big load of cash to get it done...

first, i bought a msia reg CBR9 for RM34k... then i did cross transfer all the aftermarket parts/fairings/suspension/subframe, etc etc... wat i retained on the msia bike was the engine only.. which i did a top overhaul to with new valves, seals, valve seals, gaskets etc etc... summore i put on 954 front USD fork, calliper n wave discs and new aluminium rim.. cost me a bomb..

the leftover parts from the msia bike, i fixed onto my sg bike and sold it off for about sgd4k to cover my costs... gave the buyer a full system + ohlins rear shock.. the owner also stay in GP town..

i think total came to about RM50k for it... damnit can almost buy a new K7 1000 in sg liau... but as Sev said, can keep for life... ahah..
besides, the 1st owner on the bike stated in the log card was Jalani Sidek.. (the Sidek brothers who won the badminton thomas cup in the 90's) hehe...

wah! you really spent a lot of money sia!!

haha, rasik sidek's brother bike ar? ride liao play badminton got better or not?

GRassCuTTeR · January 16, 2008

wah! you really spent a lot of money sia!!

haha, rasik sidek's brother bike ar? ride liao play badminton got better or not?

yeah dats y no way i can sell the bike after this liau...

haha yup its the sidek brothers... dun think so leh.. buy liau then lost my badminton racket... duno where it went to..knn..

Sev · January 18, 2008

walau, now second link toll fee going up after 1st feb.

damn, singapore side now charge S$4.60 one trip, malaysia side also up.

to and back cost S$20 already.

these 2 govs earn money like nobody business.

dive sin car or m'sia car also kena charge...

think go by woodland better, jam there 1 hr also wont cost S$20 petrol...

really kns...

LinW · January 18, 2008

haha, when you come to singapore again?
cannot keep too long, my wife clearing the room for new year, so throw a lot of things...

LinW you want the manual?

WAAH! i want i want!

haha...actually i can photocopy it 1st b4 bro GRassCuTTeR takes it frm u?

Sev · January 18, 2008

WAAH! i want i want!
haha...actually i can photocopy it 1st b4 bro GRassCuTTeR takes it frm u?

mine is also photocopy version.

I can pass to you to copy, then when grasscutter come, then pass to him.

900+ pages, if you can copy in your company will be good, if not outside is 5c per copy total up $45 liao.

let me know when you want to come a collect, NTU or Bedok.

GRassCuTTeR · January 18, 2008

walau, now second link toll fee going up after 1st feb.
damn, singapore side now charge S$4.60 one trip, malaysia side also up.
to and back cost S$20 already.
these 2 govs earn money like nobody business.
dive sin car or m'sia car also kena charge...
think go by woodland better, jam there 1 hr also wont cost S$20 petrol...
really kns...

whoa... i think in future the cheapest will still be a kup-kia.

use car.. whether sg/msia also just as costly.

GRassCuTTeR · January 18, 2008

sure man i dont mind sharing the manual with bro LinW. wow 5c per copy in sg ? die sia...

hondavtec1 · January 18, 2008

Hi there...

I'm posing a question on behalf of my frnd... He's oso riding CBR900... He wants to noe if a Black Bird carburettor could fit in his 900.

Please advice

Thanks (",)

LinW · January 19, 2008

mine is also photocopy version.
I can pass to you to copy, then when grasscutter come, then pass to him.
900+ pages, if you can copy in your company will be good, if not outside is 5c per copy total up $45 liao.

let me know when you want to come a collect, NTU or Bedok.

thx alot bros Sev n GRassCuTTeR!

these few days super busy...trying to settle sch stuff. will PM u when i can get some time off to meet up with u.

cheers!

LinW · January 19, 2008

sure man i dont mind sharing the manual with bro LinW. wow 5c per copy in sg ? die sia...

yeah 5c per copy is pretty insane...i'll try zapping in sch see whether cheaper or not...

Sev · January 21, 2008

yeah 5c per copy is pretty insane...i'll try zapping in sch see whether cheaper or not...

eh, i thought copying at stationary shop 5c to 10c is normal?

school confirm cheaper. NTU's library is 10c for 4 copies (i think...).

GSR00 · January 21, 2008

eh, i thought copying at stationary shop 5c to 10c is normal?
school confirm cheaper. NTU's library is 10c for 4 copies (i think...).

Bro, u sold ur 919 liao har?

GRassCuTTeR · January 21, 2008

Hi there...

I'm posing a question on behalf of my frnd... He's oso riding CBR900... He wants to noe if a Black Bird carburettor could fit in his 900.

Please advice

Thanks (",)

it will fit, but gotta re-jet the carbs. besides i dont think it will work that well compared with the stock cbr9 carbs.

GRassCuTTeR · January 21, 2008

thx alot bros Sev n GRassCuTTeR!
these few days super busy...trying to settle sch stuff. will PM u when i can get some time off to meet up with u.

cheers!

np man

Sev · January 21, 2008

Bro, u sold ur 919 liao har?

ya, driving now.

my blade only started 3 times in 6 months, so decided to let her go.

btw, who are you huh?

Sign In

Join SingaporeBikes.com today! Where Singapore Bikers Unite!

Looking for CBR 918/919 Riders

Recommended Posts

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Join the conversation

Latest Topics