[Discussion] Technical - Alarm Systems

[hit.man]

yahoo auction one...

name is frontier if i remember correctly

[Guest xanc]

one gd way i noe to test if it's sensitvie enuff or not is to act kick the tyres..

or shake ur top box if u haf..

 

tell us the results den..

 

btw, which one u bought, the $69 one or $39??

[Constructicon]

Hi ppl,

 

I've been using the Cheetah Alarm for some time liao. But the alarm is not connected to the ignition.

Anyone of you DIY the alarm to coil connection before?

Where exactly is the ignition coil?

 

Thanks for any advice given.

[mokamoka]

Hi, locate the fuse box and connect the purple wire to the ignition fuse.

[Constructicon]

Originally posted by mokamoka@Feb 2 2006, 09:43 PM

Hi, locate the fuse box and connect the purple wire to the ignition fuse.

Ok, thanks man.

Will try tml.

Hey man, do you need to get extension wires to connect the ignition wire to the alarm? Any other clamping tools needed?

[mokamoka]

Originally posted by Constructicon@Feb 2 2006, 11:27 PM

Ok, thanks man.

Will try tml.

Hey man, do you need to get extension wires to connect the ignition wire to the alarm? Any other clamping tools needed?

ya... clamp the y connectors to connect to the battery... depending on where is your ignition fuse located, you might or might not need extra wire...

[Constructicon]

Originally posted by mokamoka@Feb 5 2006, 10:13 PM

ya... clamp the y connectors to connect to the battery... depending on where is your ignition fuse located, you might or might not need extra wire...

Hi man, thanks for the replies.

 

The purple wire u mentioned is from where?

Cos my alarm got a black looped wire, which I'm supposed to cut into 2 halves and connect 1 to the ignition coil, the other to the ignition wire, like hijacking.

U got any pics?

 

Might just get the bike shop to do if too troublesome.

 

Thanks again.

[mokamoka]

Oh, that ignition coil ah... haha... OKOK... I disconnected mine already... but then for my bike, I have a ready socket to just connect.

[Constructicon]

Originally posted by mokamoka@Feb 6 2006, 09:32 AM

Oh, that ignition coil ah... haha... OKOK... I disconnected mine already... but then for my bike, I have a ready socket to just connect.

I brought my bike to the shop and asked them to connect the ignition already when I was there for regular servicing. I dun have the clamps or the connector.

 

Thanks again.

[carbine]

i had a working cheetah alarm until 2 days ago

when i on the switch below the seat...alarm will beep 2 time to indicate that its on

but both remotes i tried cant arm the alarm...pls advise,thanks.

[ichiro_jeff]

Originally posted by SiaoSter@Mar 26 2005, 02:03 PM

bring ur alarm to SIM LIM TOWER ...the shop name A.S.K Electronics...its the 3rd storey...they will repair it for u for free

 

they are the distributor for cheetah

[P-Plate TZR]

remote spolit also can repair????

[asalbole_09]

Hi,would like to noe the distance covered for the bike to be started by the remote??? :help:

[Guest DR Guru]

radio frequency's alarm is better then antenna model, i purchased one set from LAB 4yrs back which is the radio type and im staying 10 storey can easily start provided not to much of blockage ard other then that no prob starting wif remote starter, if u already installed one make sure u handle bar is lock every single time u get off ur bike cos sometime ones forget and u happy happy start wif the remote the moment u rerach the ground floor : i dont know what will happen" touchwood touchwood

[SiaoSter]

Originally posted by P-Plate TZR@Feb 12 2006, 12:40 AM

remote spolit also can repair????

er...remote i don think got repair...maybe have also i cant remember

 

but they do sell remote and with instructions on how to programme the remote according to ur alarm set

[P-Plate TZR]

ok thx.. btw can we set the sensetivity ourself???

[fusionzone]

need alarm unit ??

 

can contact me @ 97914098. used on quite alot of S4 already

[SiaoSter]

Originally posted by P-Plate TZR@Feb 14 2006, 01:40 AM

ok thx.. btw can we set the sensetivity ourself???

yup there is a knob which can adjust the sensitivity. need to use a screwdriver to turn the knob which has a 'minus' sign

 

the best part to place the cheetah alarm is attached it to the main body frame of the bike cos its the main frame that links to all parts of the bike all the way to the front or back.

 

*results varies

 

one example, i put in the box key into my box, turn the key, press the spring mechanism to unlock the box and my alarm goes off.

[PreluDe]

Originally posted by merz65@Feb 8 2004, 01:01 PM

better than that... even if u sit on it shake here n there it also wouldn't goes off..

unless u hit on e spot where u install it..

YOUR BIKE LOOK SEI SEI , ARE YOU THE ONE THAT PARKING NEAR BEDOK NORTH

[P-Plate TZR]

Originally posted by SiaoSter@Feb 14 2006, 06:58 AM

yup there is a knob which can adjust the sensitivity. need to use a screwdriver to turn the knob which has a 'minus' sign

 

the best part to place the cheetah alarm is attached it to the main body frame of the bike cos its the main frame that links to all parts of the bike all the way to the front or back.

 

*results varies

 

one example, i put in the box key into my box, turn the key, press the spring mechanism to unlock the box and my alarm goes off.

try liao like not much diff... on alarm then hit my pipe alarm neber activate..

[SiaoSter]

Originally posted by P-Plate TZR@Feb 23 2006, 02:41 AM

try liao like not much diff... on alarm then hit my pipe alarm neber activate..

did u try mouting the alarm to ur bike main body frame?

[Guest xue]

hehe i got a cheetah alarm to sell.. anybody want? used to be from my spec 3..

[red_room]

"hehe i got a cheetah alarm to sell.. anybody want? used to be from my spec 3.. "

 

 

how much u selling?

[P-Plate TZR]

Originally posted by SiaoSter@Feb 23 2006, 07:02 AM

did u try mouting the alarm to ur bike main body frame?

ya.. took out my side fairin then cable tie 2 the side frame..

[SiaoSter]

Originally posted by P-Plate TZR@Feb 23 2006, 09:06 PM

ya.. took out my side fairin then cable tie 2 the side frame..

tune to the max sensitivity level?

 

hrm...i guess results varies bah...or if don feel at ease bring to the shop at sim lim tower and request for a repair. say that the alarm is not sensitive enough ...they will do a check for u de. and its free !!