how to connect tis light?

[new licensee]

hi all, any one care to share how to go about connecting tis light (d 2 small light with red arrow pointing)? is it to head light connection? if i wan to add a ON/OFF switch to it, where can i get it?

[darren_soh86]

bro the original SP lites dun haf holes for that pole lights.. if i am not wrong, onli the chiong lights haf that.. and if u wana mod for that in ur original lights.. its kinda big project..

 

gotta drill the correct size holes.. find the connector for the lights.. do the wiring.. n if nvr do properly.. i tink when it rains.. water will go in..

[redbeacon]

My previous SP came with that kind of non-stock headlight assembly.

 

This kind of assembly features very reflective silver backing, 2 holes for the main headlight bulbs, and another 2 at the top where you can put the signal lights (in the picture itself, that dude must've put blue LEDs). Plus one clear headlight cap right up front.

 

Maybe you should try Ah-boy? I know they bring in custom white tail-lights; maybe they do bring in what you've described?

 

Not so sure about on-off switches though...I think you can try the electronic equipment shop at Sim Lim Square?

[new licensee]

bro the original SP lites dun haf holes for that pole lights.. if i am not wrong, onli the chiong lights haf that.. and if u wana mod for that in ur original lights.. its kinda big project..

 

gotta drill the correct size holes.. find the connector for the lights.. do the wiring.. n if nvr do properly.. i tink when it rains.. water will go in..

 

my sp already haf tat light install when i bought it, but jus de connection part is not connected to the connector. my question is how do i go bout connecting it to the connector?

[pyro13]

do u wan it to be on wen ur headlight is on..if yes, u can tap the power to the headlight..

[LollyPoP]

1st u need the followings:

a) wires

b) on/off switch

c) SP signal-light x 2 (go LAB buy, should be less than $30 for a pair)

 

1) remove the signal light & use the connector onli

2) drill a hole to the size of the connector @ yr headligh (u need to remove front fairing to drill)

3) connect wiring to connectors, merge both e wrings of the connector into 1. den to a switch den to yr bike ign. fuse.

 

& yes, it's just tat easy.

tat's wat i did on my 01' GSX-R 750 years back.

[kurarensu]

ask fnee, main thing is :

 

- create hole in ur headlight to insert the t10/LED, btw u nid a t10 socket if u using t10

- switch

- wires..

 

and some electrical knowledge

[juSriDe]

anyone recommend any shops to do it?? cause some shop wun wan to do it..cause troublesome..

[new licensee]

1st u need the followings:

a) wires

b) on/off switch

c) SP signal-light x 2 (go LAB buy, should be less than $30 for a pair)

 

1) remove the signal light & use the connector onli

2) drill a hole to the size of the connector @ yr headligh (u need to remove front fairing to drill)

3) connect wiring to connectors, merge both e wrings of the connector into 1. den to a switch den to yr bike ign. fuse.

 

& yes, it's just tat easy.

tat's wat i did on my 01' GSX-R 750 years back.

 

Thks for ur info LollyPoP.... but can u pls elaborate more on the connection part.... thks ......

[thepunkz]

the on/off switch sim lim tower will have.

[new licensee]

i've already found my on/off switch le... nut i need help on the connection part... my on/off switch got 3 wires, red black & yellow..

anyone gd in connection part pls help.....