[Discussion] Exhaust Systems - GPR

[B.e.n.s.o.n]

1st version no screw n dont risk it to cut.

 

haha... for mine, i oso cant take out sia.... the screw too long nv take off then the tip like 'melted'... sian....

[steel_headz]

Wah miz a lot of stories leh...

[MUSHA]

Go there again also waste time and petrol..... live with it still next servicing... next time i learn how to tune it myself.... idiot:angry:

 

Stop them if necessary. Changing tyres and tuning carbs is a total different story. Idling at 2k rpm is ridiculous - wasting petrol oso...

 

Actually, if nothing wrong with the bike's operating rpm(s), just leave it. As they said - if it ain't broken, don't fix it.

[MUSHA]

wanna change to a relax ride lehz.... under too much stress lately... expressway always wack over X^B's safety limit, lucky haven die.... haha crap.... no lah...COE reaching soon.... its now to let go or nv....

 

Relax? Ya sure...

 

Over XB's limit is created by Da^Bai (and that's u, bro... ).

 

Don't give up on X^B lah...

[steel_headz]

Stop them if necessary. Changing tyres and tuning carbs is a total different story. Idling at 2k rpm is ridiculous - wasting petrol oso...

 

Actually, if nothing wrong with the bike's operating rpm(s), just leave it. As they said - if it ain't broken, don't fix it.

 

2k? wah so high hah... The bike shop at eunos tat u refering is it?

[MUSHA]

haha... for mine, i oso cant take out sia.... the screw too long nv take off then the tip like 'melted'... sian....

 

Wa say...

 

Can ask ur mech if it can still be remove? Dont scare me leh, mine got screw on but the baffle is off. If screw cannot be remove, then I inspection siao liao...

[MUSHA]

2k? wah so high hah... The bike shop at eunos tat u refering is it?

 

Not my bike, dude... it's joey_sfb's bike.

[steel_headz]

Wat has the bike shop do to his bike? So sad...

[B.e.n.s.o.n]

Relax? Ya sure...

 

Over XB's limit is created by Da^Bai (and that's u, bro... ).

 

Don't give up on X^B lah...

 

eh ehhhhhh... dun always look me as lacer leh... i'm a slacker ok....

 

2k? wah so high hah... The bike shop at eunos tat u refering is it?

 

yeah man.... with a funny shop name too..

 

Wa say...

 

Can ask ur mech if it can still be remove? Dont scare me leh, mine got screw on but the baffle is off. If screw cannot be remove, then I inspection siao liao...

 

for urs should not be a problem lah... my screw not the orginial screw... last time i lost the nut when i first took out then went to make another one which is a little bit long. maybe its the heat from the buffer melted the screw...

[steel_headz]

eh ehhhhhh... dun always look me as lacer leh... i'm a slacker ok....

 

 

 

yeah man.... with a funny shop name too..

 

 

 

for urs should not be a problem lah... my screw not the orginial screw... last time i lost the nut when i first took out then went to make another one which is a little bit long. maybe its the heat from the buffer melted the screw...

 

 

Like tat when inspection time must put back the buffer conelike rite?

[MUSHA]

Wat has the bike shop do to his bike? So sad...

 

Read the last 2 posts by joey_sfb leh...

[norishimu]

when it comes the time fr me to get a car, (OPC mos prob).. i'll downgrade to a gilera..

chill.. with my shades n board shorts..

scoot ard.. haha..

[MUSHA]

eh ehhhhhh... dun always look me as lacer leh... i'm a slacker ok....

 

 

 

yeah man.... with a funny shop name too..

 

 

 

for urs should not be a problem lah... my screw not the orginial screw... last time i lost the nut when i first took out then went to make another one which is a little bit long. maybe its the heat from the buffer melted the screw...

 

Slacker will break X^B's limit? Slacker my.... beep, beep, beep (censored).

 

Then like tat, exhaust become Gen 1 liao lor...

[MUSHA]

Like tat when inspection time must put back the buffer conelike rite?

 

Best is to put back. If fail 1st time, u LL got to go back to re-inspect again.

[B.e.n.s.o.n]

Like tat when inspection time must put back the buffer conelike rite?

 

the conelike and got holes one no need put back... wat i'm saying is the so call silencer... so would call it the buffer... so wat is wat till now i oso dun noe... put back the tip part for inspection will do... tested and proven on last sat...

[MUSHA]

when it comes the time fr me to get a car, (OPC mos prob).. i'll downgrade to a gilera..

chill.. with my shades n board shorts..

scoot ard.. haha..

 

But your S still under installment? If not can keep it lah...

 

How come this sentence sounds funny...?

[MUSHA]

the conelike and got holes one no need put back... wat i'm saying is the so call silencer... so would call it the buffer... so wat is wat till now i oso dun noe... put back the tip part for inspection will do... tested and proven on last sat...

 

So went for ur inspection liao huh? Mine upcoming next month... Time to put it back soon..... for half a day.

[norishimu]

But your S still under installment? If not can keep it lah...

 

How come this sentence sounds funny...?

 

nope no installments..

condition still gd..

my trusty horse..

12 yr ol bike..

[MUSHA]

nope no installments..

condition still gd..

my trusty horse..

12 yr ol bike..

 

Keep it bro... sell u will heart pain. Then ur Gilera paying cash or start w installment? If installment starts all over again, isn't it back to square one?

[SparkerS1]

Time to put it back soon..... for half a day.

 

haha, i lazy to put back, too troublesome:cheeky:

[MUSHA]

haha, i lazy to put back, too troublesome:cheeky:

 

Stil can pass inspection wor?

[B.e.n.s.o.n]

tonight gonna 'operate' to get my buffer/silencer out liao.... miss the sound...

[steel_headz]

I heard from bike shops they say go STA don go VICOM... Cos they say Vicom quite fussy... A lot of qns...

[B.e.n.s.o.n]

I heard from bike shops they say go STA don go VICOM... Cos they say Vicom quite fussy... A lot of qns...

 

haha... wat is STA?

[MUSHA]

haha... wat is STA?

 

Still That Answer?