Yamaha YZF-R6

[TiUsTer]

R46, hows the mass order for the tire valve coming along???

[R6ex]

Originally posted by fruitcakepablohoney@Sep 18 2006, 08:54 AM

A short outing for coffee or ride up Malaysia?

 

Anybody have suggestion!

This Sat. Malacca trip ... if no work, I go. mika14 going oso.

 

http://www.singaporebikes.com/forum/index....dpost&p=3284538

 

Next Sat.-Sun. Genting/KL trip, I got leave to go liao. mika14 going oso.

 

http://www.singaporebikes.com/forum/index....dpost&p=3283439

 

Hope to catch u guys on these trips as well ... cheers!

 

[R46]

Originally posted by TiUsTer@Sep 18 2006, 10:51 AM

R46, hows the mass order for the tire valve coming along???

http://i72.photobucket.com/albums/i177/luthertoh/ar_11970_D.jpg

 

Aluminium Tire valve MO:

 

PRICE : $50.00

 

nick/colour/contact no.

1. R46/bLuE/ 98732551

2. TiUsTer/black/91126498

3. Leo/Blue/ 91278077

4. ah keong/havet confirm

5.

 

right now i have a few guys want to get as well if we can get 20 the price will be around $40plus... so i think this mass order will take a while maybe you can check out if you have any friend want to get...

[Wayang]

Originally posted by R46@Sep 18 2006, 12:29 AM

haha bro we have something in common....

aiya.. becos i need to go pick up my fren.. she works at taka so have to go into orchard area.. currently i ask her to meet me at tang's.. told her exercise is good for her.. LOLZ

[R46]

Originally posted by Wayang@Sep 19 2006, 03:26 PM

aiya.. becos i need to go pick up my fren.. she works at taka so have to go into orchard area.. currently i ask her to meet me at tang's.. told her exercise is good for her.. LOLZ

haha... but for me i got a small bike now usally go town i ride my small bike...

[GrimReaper]

R6 06 carbon fibre parts with kavlar. Engine 3 pcs from italy.

 

Hi guys i bought this from italy. i should receive it in 2 days time but i now need the money so i selling it off. Brand new, never used. True kevlar protection.

 

Selling for $520. (Cost Price) (No Discounts)

 

http://i72.photobucket.com/albums/i179/vjjam/Carbonparts.jpg

[TiUsTer]

Originally posted by R46@Sep 18 2006, 08:36 PM

http://i72.photobucket.com/albums/i177/luthertoh/ar_11970_D.jpg

 

Aluminium Tire valve MO:

 

PRICE : $50.00

 

nick/colour/contact no.

1. R46/bLuE/ 98732551

2. TiUsTer/black/91126498

3. Leo/Blue/ 91278077

4. ah keong/havet confirm

5.

 

right now i have a few guys want to get as well if we can get 20 the price will be around $40plus... so i think this mass order will take a while maybe you can check out if you have any friend want to get...

bro, i will try to help, but can't wait liao leh. going to change my tires soon so tot of doing it same time, everytime pump n release air in the track very lechey. anyway.....$40+ not much diff from $50

[TiUsTer]

Originally posted by Wayang@Sep 19 2006, 03:26 PM

aiya.. becos i need to go pick up my fren.. she works at taka so have to go into orchard area.. currently i ask her to meet me at tang's.. told her exercise is good for her.. LOLZ

ask her to walk to the bus stop behind lah, road leading to four seasons hotel. there got no erp n distance to walk not very far compared to tangs

[TiUsTer]

Originally posted by GrimReaper@Sep 19 2006, 08:32 PM

R6 06 carbon fibre parts with kavlar. Engine 3 pcs from italy.

 

Hi guys i bought this from italy. i should receive it in 2 days time but i now need the money so i selling it off. Brand new, never used. True kevlar protection.

 

Selling for $520. (Cost Price) (No Discounts)

 

http://i72.photobucket.com/albums/i179/vjjam/Carbonparts.jpg

try to help but not to dissapoint u, i can get it below S$400

[TiUsTer]

anyway, i'm selling off my new set of R606 race fairing, tried posting the pic in here but having difficulty so if u guys interested jus PM me n i send the pic to ur email. jus installed last wk comes complete with front fender, head, 2 sides, bellypan, tail. only thing not included is the undertail so u can use back the original with the tail light, hav done a nice cut out job on the head fairing on the left side for the projector light n will also throw in a brand new puig light smoke screen. bought $800+, plus fitment n cut out for projector light n puig screen cost me total of $1.1k, I just wan to let go at $700 or any higher offer, everything tt i mention less the projector light which u can buy for $50 -$100 depending on type, decided to hav my bike in total carbon fibre, my lost is your gain. PM me if interested.

[R46]

Originally posted by TiUsTer@Sep 20 2006, 08:51 AM

bro, i will try to help, but can't wait liao leh. going to change my tires soon so tot of doing it same time, everytime pump n release air in the track very lechey. anyway.....$40+ not much diff from $50

around when u changing the tire bro ?

[Pauche]

any reviews on the M3 tyres for those who has fitted it?

how issit compared to the M1 or pilot power?

[Wayang]

Originally posted by TiUsTer@Sep 20 2006, 08:54 AM

ask her to walk to the bus stop behind lah, road leading to four seasons hotel. there got no erp n distance to walk not very far compared to tangs

oh.. hmmm.. tang's is easier for me la.. btw the traffic at orchard realli sux.. esp when ridin my r6.. feel like i'm ridin an oven..

[R6ex]

same problem here ... with milage, my bike seems to heat up more than when new ... last time, wear shorts, still ok, but now shorts pretty much CMI in start/stop traffic.

 

i read one study before that said M3 is superior to PP 2CT. i oso read another study that said Qualifier is superior to PP. an overseas forum said PP 2CT starts to slide on track after about 10 laps. my SCPro is good on track, but rain = scary & warm up slow. hope to go TH year end, flatten tire & change to some streetable ones.

[shaunz]

http://i72.photobucket.com/albums/i177/luthertoh/ar_11970_D.jpg

 

Aluminium Tire valve MO:

 

PRICE : $50.00

 

nick/colour/contact no.

1. R46/bLuE/ 98732551

2. TiUsTer/black/91126498

3. Leo/Blue/ 91278077

4. ah keong/havet confirm

5. shaunzz/black/96932732

 

right now i have a few guys want to get as well if we can get 20 the price will be around $40plus... so i think this mass order will take a while maybe you can check out if you have any friend want to get...

[bryancbg]

hey guys, was at toa payoh just now and saw a lime green/white 06'r6 in the basment carpark! nice colour on a beautiful bike will post a pic of it later...just wanted to share it with you guys...

[fruitcakepablohoney]

Originally posted by Pauche@Sep 20 2006, 12:20 PM

any reviews on the M3 tyres for those who has fitted it?

how issit compared to the M1 or pilot power?

Hi Pauche,

I'm not in a position to give my comment as my milage on bike as still very little

But got this comment from r6-forum.com

 

Yes it's true bitches. I put just over 500 miles on these badboys yesterday and all I can say is, ****ING WOW, Metzeler did their Research and Development on this tire.

The first thing you notice about these tires is just how meaty they are. I don't know the specific void ratio's for M3's or Pilot Powers, but the M3's look like EVEN LESS tread is cut out of the rubber. The M3 tread pattern isn't as undeniably cool looking as the Pilot Power, but once you actually get them on the road you will not give it a second thought.

On the road, the I noticed how much stiffer the sidewalls on these tires are then the Powers. I always run 32 front 34 rear in my tires, and the M3's gave a noticeably firmer ride. At first, this sounds like a bad thing, but once the pace picks up, its perfect. Even though the tire is a bit stiffer, the bike is not upset nearly as much in a mid-corner bump as compared to the Powers.

These tires heat-up very quickly, but even when cold still slide around predictably, these tires nearly refuse to break loose, even when while hauling ass up a 180 degree on-ramp in 58 degree morning temps yesterday.And once the tires are warmed up, there is an unbelievable amount of grip available. I do not hesitate to say these tires are stickier than Pilot Powers. So sticky in fact, that I was only able to slide the rear end out twice the entire (and believe me I was trying to) and one of those times was obviously attributable to the road surface. I reached a point with the Powers that the clutch almost seemed to be slipping I was spinning the rear up so much coming out of some turns.The only point when the M3 stepped out was amazing and left a huge grin inside my helmet. I was exiting a very tight, uphill, 2nd gear corner. I whack the throttle open, trying to induce tire spin, the rear steps out maybe 2 inches and continues to hold the line. As I'm coming up the hill the rear is gripping so much while spinning, the bars start to waggle back and forth. Then approaching the end of the corner the front wheel comes off the ground exiting the corner while still leaned over, an impressive feat for a 600 cc motorcycle with 215 pounds of gear and rider on top.I believe some people will think negatively of the profile of the tire, but I find it better for road riding than the Power. The tire is more rounded, so turn-in takes a bit more effort. This tire doesn't have that sometmes uneasy feeling of "falling" into a corner, or feeling like once you pick a line, the tire just wants to continue to fall over even farther. Once you pick a line, the M3 stays there, almost to the point of being a bit of effort to get the bike back upright, even on the gas.......HARD!I'm so thoroughly impressed with this tire, that even my recent streak of wanting to test all the sport tires as the current ones where out, may be put on hold by the discovery of these tires.

 

Also comments from our local rider 5thRider

Big "Thank you!" to all riders who came for the event and staff of JR Pte Ltd for providing all the neccessary ammentities for us. Most satisfied that everything went according to plan and with plenty of time to spare too.

Appreciated that they brought the Chief Tyre Tester(CTT) from Germany to answer all our queries as well.

Just my humble opinion---Regarding the M3s... for this price, good stability and grip(comfortable 41-42s on 600cc) and better feel as compared to the M1s. Most riders could tell what the tyre was doing and could hence ride accordingly. Best of all, frugal wear rate!

Please check tyre pressure setings for circuit riding for YOUR motorcycle with JR representatives during purchase. We did not get caught in any adverse weather, so no comment on wet riding.

 

CTT though mentioned there is plenty of grip and traction in the rain. See you SEPT 24th track day!

[bryancbg]

hi guys,the picture i promised...i this a stock colour? or the owner painted it?http://www.picturesky.com/albums/userpics/12161/Picture049_20Sep06.jpg

 

sorry for the blurr pic was in the car when the pic was taken

[HamsterZ]

Originally posted by bryancbg@Sep 21 2006, 01:18 AM

hi guys,the picture i promised...i this a stock colour? or the owner painted it?http://www.picturesky.com/albums/userpics/12161/Picture049_20Sep06.jpg

 

sorry for the blurr pic was in the car when the pic was taken

hey i saw that too.. (along with a blur pic taken in a car with poor lightings).... one of the hub's MCSP right? Its definitely not a stock color.. something diff!

[GrimReaper]

So anyone interested in getting the carbon fibre kevlar protection for your R6 06. Shops in SG sell more ex or they dont even have it...let me know soon.

[fruitcakepablohoney]

Originally posted by bryancbg@Sep 21 2006, 01:18 AM

hi guys,the picture i promised...i this a stock colour? or the owner painted it?http://www.picturesky.com/albums/userpics/12161/Picture049_20Sep06.jpg

 

sorry for the blurr pic was in the car when the pic was taken

Wah... only green R606 in S'pore!

 

Btw... you still riding MT-01?

[GrimReaper]

fruitcake u want the engine protection kit ?

 

R6 06 carbon fibre parts with kavlar. Engine 3 pcs from italy.

 

i bought this from italy. i should receive it in 2 days time but i now need the money so i selling it off. Brand new, never used. True kevlar protection.

 

Selling for $520. (Cost Price)

 

http://i72.photobucket.com/albums/i179/vjjam/Carbonparts.jpg

[bryancbg]

yes it is in the toa payoh hub mscp b1 if i have not forgotten....

yes,fruitcakepablohoney still on a mt-01

[299]

Originally posted by R6ex@Sep 17 2006, 03:02 PM

Perhaps join the R1 guys next Sat. 2100 GP Esso (I'll most likely pass up on tis 'coz wil b sleepy by 2000 ... haha)?

 

http://www.singaporebikes.com/forum/index....0entry3282452

do join us if possible.

 

Whether be it R1 or R6, we still belong to the bikers groups.

[TiUsTer]

Originally posted by bryancbg@Sep 21 2006, 10:15 AM

yes it is in the toa payoh hub mscp b1 if i have not forgotten....

yes,fruitcakepablohoney still on a mt-01

carefull guys when u park in toa payoh. was there 3wks ago n saw 2 R606 vandalised badly, 1 black, 1 red. looks like some black melted stuff poured on the bike. totally destroyed estatically. i really feel for the owner, coz i ride R606 myself. hope the person tt did tt get back 100 folds. carefull guys!