Yamaha YZF-R6

[ambasnakeman]

Thanks for the infomation & advised given......

Orh...... i bought this bike (Raven) at 17K OTR (COE abt 1k odd a bit)

RPM too low, hmm... whats rpm reading spec when engine already warm up?

I dont know if im able to do the diagnostic myself a not..... iszit the same step stated by AR2??? If not pls advised again, tks

 

what u mean by rpm too low

[Guest 6.5rpm]

Could be a low idling as suggested by HelmetBoX. Check that first, but i doubt since you have ridden 2000km w/o any issues.

 

Might be a TPS problem, but would be a pain in the *** if occurred at such mileage. Run a self diagnostic for any error code stored in The best bet would be to bring it for WARRANTY claims should it occur often.

 

But before you hit HL, maybe you can run through the diagnostics (no.62) first , to check for any history of errors that might have occured/recorded. If there is diagnostic no.63 should show the error codes, and you can get some info from it.

 

Hope nothings big...

 

hmm.. can tell me more about this TPS problem?

[HelmetBOX1605198525]

Thanks for the infomation & advised given......

Orh...... i bought this bike (Raven) at 17K OTR (COE abt 1k odd a bit)

RPM too low, hmm... whats rpm reading spec when engine already warm up?

I dont know if im able to do the diagnostic myself a not..... iszit the same step stated by AR2??? If not pls advised again, tks

 

should be around 1250-1350

17k...

a good price man..

anyway where did you bought it from?

HL?

[GrimReaper]

Anyone watching Moto Gp anywere today?

[MrCoconut]

Orh...... i didnt get it from HL i get it from A.S Phoon (Changi) as i know their boss there since few years ago......

Btw just now i go check my bike liao & warm up until 80 degree as indicated at the temp panel. The idle rmp after warm up fall at the middle of 0-1k. Think its too low as got bro say should be 1250-1350. I adjust it liao but unable to try it out as its raining at the moment. Will try out later if possible & hope its only the rpm setting problem nia

A few more question to ask, what kinda of chain lube does not really split off that easily as i just bought maxi chain lube & use its split out beri easy. Then what kinda brand frame slider no need to drill or enlarge the screw hole of my model? I wanted to change my headlight & pilot bulb to white light but what kinda of bulb model to buy as there is H1,H4 & etc.... a bit confuse abt it

Tks to all

[Guest Bikes_knight]

enquires, if i purchase yoshi header using original end can will the horse power increase and will exhuast sound be diff?

[HelmetBOX1605198525]

Orh...... i didnt get it from HL i get it from A.S Phoon (Changi) as i know their boss there since few years ago......

Btw just now i go check my bike liao & warm up until 80 degree as indicated at the temp panel. The idle rmp after warm up fall at the middle of 0-1k. Think its too low as got bro say should be 1250-1350. I adjust it liao but unable to try it out as its raining at the moment. Will try out later if possible & hope its only the rpm setting problem nia

A few more question to ask, what kinda of chain lube does not really split off that easily as i just bought maxi chain lube & use its split out beri easy. Then what kinda brand frame slider no need to drill or enlarge the screw hole of my model? I wanted to change my headlight & pilot bulb to white light but what kinda of bulb model to buy as there is H1,H4 & etc.... a bit confuse abt it

Tks to all

 

slider can use those motovation with braket no there is no drlling required..blub is H7 12v/55w

[Chubb]

any bro here know r606 batt can be charge by 12v charger?

[AR2 Performance]

slider can use those motovation with braket no there is no drlling required..blub is H7 12v/55w

 

 

the main lights are as HelmetBOX mentioned.. the pole lights are t10 size.ower ratings depends on filament(5W) or LED type (1W).

[AR2 Performance]

any bro here know r606 batt can be charge by 12v charger?

 

All bike/car batts can be charged by a 12V charger. The main issue is to find an approximate mAH charger. Too much and it might fry your batt in the long run.

[z_zhihong81]

"Urgert Help

Does anyone riding 07R6 facing a yellow warning light appear on the RPM meter.If yes what is the problem."

 

i have the error 18 also...

I happen to me all the time...

I bet you don't always rev yr bike right?

the ex valve stuck liao... the hong leong say the valve got rusty so stuck liao... For those who always rev their R6 will not have much of this problem...

[AR2 Performance]

Bingo...

 

 

isn't much of a very big diff if its stuck. not much difference. A very high chance the ex-up was meant for emission purpose. Take a look at the butterfly"default" position. It is at the "always open" from idling to mid rpm.

 

A proper ex-up commonly seen in the 1L Yamahas or similar mechanical system in other makes, works in the opposite way.

 

 

 

"Urgert Help

Does anyone riding 07R6 facing a yellow warning light appear on the RPM meter.If yes what is the problem."

 

i have the error 18 also...

I happen to me all the time...

I bet you don't always rev yr bike right?

the ex valve stuck liao... the hong leong say the valve got rusty so stuck liao... For those who always rev their R6 will not have much of this problem...

[crazywheels]

Any of you guys tried newfren brakes pads before?

[AR2 Performance]

Any of you guys tried newfren brakes pads before?

 

 

Do you mean GOLDFren as of below?

http://www.goldfren.cz/index.htm

http://www.lm-spares.co.uk/acatalog/brakepadshhfront.jpg

 

If it is.. personal experience on 4 bikes (CBR400RR-J, 00R1, 02R6, VFR) good braking power, with slightly softer pad feel companied by alotta brake dust. Performance diminish with mileage pretty fast (maybe abt 5k.) Deteriorates very in-proportion with use if track session were frequent.

 

I would get it (well i got them for the last 4 bikes) when budget is a deep constraint. You can can a few pairs and change as often, which you prob can't with the branded ones.

 

If $$ is to your dispense, choose the higher end ones with better much braking power along with more mileage. Some items cannot be saved on $$.

[AR2 Performance]

http://images.yamaha-racing.com/photo/high/P20070618163958625.jpg

 

Thats Anthony West on R6 07, World Supersport....just before he moved to Moto Gp Kawasaki Team. Check out the lean angle.

 

Also take note, they are running on Pirelli Diablo Corsa, DOT race tyres, not slicks

 

GREAT LEAN ANGLE.. NOT TO MENTION THE SHOT!

 

makes my siggie look like crap... No.. in fact worst then crap!

[AR2 Performance]

Looks tough, think i'll get it too bro!

From bikelab?

 

hhmmm another idea for some "small" project!! haha..

[HelmetBOX1605198525]

Do you mean GOLDFren as of below?

http://www.goldfren.cz/index.htm

http://www.lm-spares.co.uk/acatalog/brakepadshhfront.jpg

 

If it is.. personal experience on 4 bikes (CBR400RR-J, 00R1, 03R6, VFR) good braking power, with slightly softer pad feel companied by alotta brake dust. Performance diminish with mileage pretty fast (maybe abt 5k.) Deteriorates very in-proportion with use if track session were frequent.

 

I would get it (well i got them for the last 4 bikes) when budget is a deep constraint. You can can a few pairs and change as often, which you prob can't with the branded ones.

 

If $$ is to your dispense, choose the higher end ones with better much braking power along with more mileage. Some items cannot be saved on $$.

 

 

you own 03R6 before ar? anywya hw much is the goldfren?

[AR2 Performance]

you own 03R6 before ar? anywya hw much is the goldfren?

 

 

sorry typo... its 01R6... some of the above owned, shared, rode.

 

Gold fren for the R6 is abt $S14 per pair (1 caliper). the HH is prob about $S18. Most of them only last a good 3~5k, which drops in performance. But braking effect in the rain is not adversely affected.

 

An affordable alternative for 1 full set, provided you replace them when they go kaputz...

[crazywheels]

Nah, its not goldfren, its newfren

 

Here are some pics.

http://www.newfren.it/index2.htm

[keOnni]

anione noes how much an 05r6 can fetch on the market now? wanna sell mine soon but not sure of the price.. tinkin of changing a supermotard..

 

2005 march registered fully stock price.

[AR2 Performance]

Nah, its not goldfren, its newfren

 

Here are some pics.

http://www.newfren.it/index2.htm

 

Never used before... keep us posted (urls/links/user review) if you do get more info...

[Pauche]

tinkin of changing a supermotard..

 

 

getting a DRZ or some exotic ones?

[Wayang]

XR4 is the best~!

[Pauche]

XR4 is the best~!

 

hahahaha..... go track play lah!

[HelmetBOX1605198525]

Exc 525....................