Yamaha YZF-R6

[HelmetBOX1605198525]

mine in my back seat.. another way of not removing e bar is do some cutting off from yr IU.

wat to cut? dat depends on u.

its stil detectable on slow speed.. fast speed depends

 

my friend did not cut anything le..

just place it under the seat!

but need to adjust here and there!

[LamerFornica]

Hi guys just to ask a nood question and i hope sumwan here would be kind enuf to advise me. Behind our front wheels we can see the four powerful pipes and i was thinking if i do a mesh to prevent stones from hitting the pipes,is it a good idea?

[ambasnakeman]

good idea.....but remember to curve it...else, under hard breaking, will hit front tyre.

[LamerFornica]

If using a slip on with original cat without PC3, is there any bad disadvantage to the bike like too rich or too lean?

[icepurple]

most ppl do the mesh for the radiator...

so far i haven came across ppl doing it for the pipes, maybe u can be the 1st 1...

personally i dont think there's a need to do it for the pipes...

[Wayang]

Hi guys just to ask a nood question and i hope sumwan here would be kind enuf to advise me. Behind our front wheels we can see the four powerful pipes and i was thinking if i do a mesh to prevent stones from hitting the pipes,is it a good idea?

 

four powerful pipes ?

[HelmetBOX1605198525]

four powerful pipes ?

 

i think he refering to the header...

[guards80]

hi guys i like to ask u all tat is there any such thing parking on footway booked with demerit point?

[lvin]

If using a slip on with original cat without PC3, is there any bad disadvantage to the bike like too rich or too lean?

 

there will be any diff if u jus put slip on..... unless u are saying uu remove the big metal cat....

[vendeta]

Hi to all those own this sport bike,

 

SUZUKI GSXR600 K7 MODEL

 

HONDA CBR600 2007 MODEL

 

YAMAHA R6 2007 MODEL

Would like to know more about this bike as i intend to get 1 of them for a weekend bike. Right now i own SUZUKI GSR400 K7 MODEL and i love the design, power and handling. But this bike i use everyday. And thought of getting a sport bike for the weekend. To those have ride this bike and those old bird please advice me the spec of each bike. I have read a lot of thread and all 3 bike have good review. Thought of getting all 3 but damn cant afford it hehehehehe....

 

So guy hope u all could help me in this

 

Thanks

[egg_hwee]

hi all R6 bro,anyone here have put a full system on their R6'06....which is better akrapovic or GPR??how bout arrow??any comments

[R46]

hi all R6 bro,anyone here have put a full system on their R6'06....which is better akrapovic or GPR??how bout arrow??any comments

 

I will say akrapovic will be one 1 of the best in the market follow by leo vince.

[rein_jahat14]

I will say akrapovic will be one 1 of the best in the market follow by leo vince.

In My Honest #72 Opinion...

I use the Akra(full system) for my 1st & 2nd round in MSS..then switch to the Leo Vince's(full system)..

Somehow i could not tell the diff from the 2 in terms of power & responce..except the growl from Akra is menacing but the Leo Vince's is not far behind..

 

BUT

I low side on my round 2 & scuff the Akra carbon fibre end can..sad to say had that been a Leo Vince i could easily replace the end can sleeve & cone(Much cheaper than getting a whole end can)..

For the Akra once u trash it..that's it..u gotta get a new one(brand new end can est.$750-$900) or make do with the scuff..

 

SO

if u do wanna get any exhaust,check if they have replacement parts in case u trash it..so u can refurbish it instead of getting a whole replacement..

 

OR

U guys can might wanna consider the Muffler Slider,R46 is doin a mass Order..Do consider investing..

[GrimReaper]

MUFFLER SLIDER

 

Before Crash

 

http://i72.photobucket.com/albums/i177/luthertoh/de0b_1_sbl.jpg

 

After 60-65 MPH Low side!

 

Customer said if he had mounted the slider in tiop of the rivets there would have been zero damage.

 

http://i72.photobucket.com/albums/i177/luthertoh/91a5_1_sbl-1.jpg

 

http://i72.photobucket.com/albums/i177/luthertoh/8461_1_sbl.jpg

 

Some bikes need more than 1 Muffler Sliders to fully protect your muffler.......... 1 at the front and 1 at the back.

 

Colors available are Red, Blue, Orange, Yellow & Black.

 

http://i72.photobucket.com/albums/i177/luthertoh/6e22_1_sbl.jpg

 

Muffler Slider sizing chart

 

Mini Slider Fits - 10-12 inch circumference muffler

 

Small 1/2 Slider Fits - 12-14 1/2 inch circumference muffler

 

Full Slider Fits - 12- 14 1/2 inch circumference muffler

 

Full XL Slider Fits - 14 1/2 - 22 inch circumference muffler

 

To determine proper Muffler Slider size needed - using a fabric Sewing tape measure or a piece of string, measure the circumference of your muffler by wrapping around your desired Muffler Slider location as shown below.

 

http://i72.photobucket.com/albums/i177/luthertoh/b1f9_1_bl.jpg

 

Est price not more than $99 Sing dollar (will be cheaper depanding on how many orders)

 

Add your nick on the list if you like to get one.

 

Nick/Contact No. /Colour/Muffler Slider sizing/Qty

1. R46/98732551/black/Full XL Slider/2

2. fruitcakepablohoney/black/Full XL slider/1

3. rein_jahat14/black/Full XL slider/1

4. snakeman/black/full XL Slider/1

5. GrimReaper/black/Full XL Slider/1

6.

7.

8.

9.

10.

 

PLS TAKE NOTED I HAVE CHANGE THE PRICE TO $99 .

CLOSING DATE OF ORDER 31/10/07 .

PAYMENT TO BE MAKE ON 1/11/07

 

 

I Want one tooooooooo

[GrimReaper]

Amba, let me know when i can pick up the tail from you. I also busy , i know you also busy bro.

[ambasnakeman]

anytime, sms

[eyz]

Anyone got a r6 06 stock windscreen for sale?

[hanzi24]

hi guys, im looking for R6 07 headlight protector but any type to recommend? went down to motoworld and they say dun have...

[eyz]

ya can try Race Shield protective film which is offered by AR2 Performance.

[R46]

In My Honest #72 Opinion...

I use the Akra(full system) for my 1st & 2nd round in MSS..then switch to the Leo Vince's(full system)..

Somehow i could not tell the diff from the 2 in terms of power & responce..except the growl from Akra is menacing but the Leo Vince's is not far behind..

 

BUT

I low side on my round 2 & scuff the Akra carbon fibre end can..sad to say had that been a Leo Vince i could easily replace the end can sleeve & cone(Much cheaper than getting a whole end can)..

For the Akra once u trash it..that's it..u gotta get a new one(brand new end can est.$750-$900) or make do with the scuff..

 

SO

if u do wanna get any exhaust,check if they have replacement parts in case u trash it..so u can refurbish it instead of getting a whole replacement..

 

OR

U guys can might wanna consider the Muffler Slider,R46 is doin a mass Order..Do consider investing..

 

Hey bro i low side at PG a few week ago so it acutally hit on my mid pipe and abit on the sleeve area. I purchase replacement from us i got both around $300plus including shipping.

[AR2 Performance]

hi guys, im looking for R6 07 headlight protector but any type to recommend? went down to motoworld and they say dun have...

 

You can try RACEshield headlight protector. Provides more benefits to conventional acrylic protection. To name a few :-

 

http://www.ar2performance.com/forums/raceshield-install01.gif

 

1. Clear (resolves LTA issues)

2. Does not affect light intensity. (0.15mm thickness VS 2mm acrylic which diffracts light)

3. No velcros. (No ugly "4~6" white attachment spots)

4. Not visible or re-usable to be stolen. (Resolves spending $$ again when stolen)

5. No unecessary fogging.

 

Other advantages against leather bras & acrylic protection. http://www.singaporebikes.com/forums/showthread.php?t=139399

[rein_jahat14]

Hey bro i low side at PG a few week ago so it acutally hit on my mid pipe and abit on the sleeve area. I purchase replacement from us i got both around $300plus including shipping.

 

TRUE.

 

The sleeve is available..u can get it from the local authorised dealer here..but for the cone-tip..

they don have..

 

If ur able to access that pls get back to me..i would like to get it..so can replace for the scuff one..Its the Carbon Fibre one..Thanks:thumb:

[hanzi24]

You can try RACEshield headlight protector. Provides more benefits to conventional acrylic protection. To name a few :-

 

http://www.ar2performance.com/forums/raceshield-install01.gif

 

1. Clear (resolves LTA issues)

2. Does not affect light intensity. (0.15mm thickness VS 2mm acrylic which diffracts light)

3. No velcros. (No ugly "4~6" white attachment spots)

4. Not visible or re-usable to be stolen. (Resolves spending $$ again when stolen)

5. No unecessary fogging.

 

Other advantages against leather bras & acrylic protection. http://www.singaporebikes.com/forums/showthread.php?t=139399

 

Ya i know, have been considering... if lets say i want it when is the earliest i can get? PM me and let me know

[R46]

TRUE.

 

The sleeve is available..u can get it from the local authorised dealer here..but for the cone-tip..

they don have..

 

If ur able to access that pls get back to me..i would like to get it..so can replace for the scuff one..Its the Carbon Fibre one..Thanks:thumb:

 

erm i not sure what the cone tip but i help u to check it out.

[AR2 Performance]

Ya i know, have been considering... if lets say i want it when is the earliest i can get? PM me and let me know

 

hanzi24, we do a range of installation timings by appointments only.

 

Mon ~ Sunday :-

1. morning slots (0900~1000hrs slot)

2. noon slots (1400~1500hrs slot)

 

 

As the above are recommended timings for installations, the best bet would be to drop us a buzz (+65 96950802) for instant appointments.

We are pretty flexible, but we do not carry out any installation near/after sunset due to visibility.

 

**Note :- weekends are usually full.

** No appointments available from 21st Oct 2007 ~ 03 Nov 2007.

 

Duration of installation : Approximately 3hrs for full kit (Varies with each make of motorcycles)

 

------------------------------------------------------------------------------------------------------------------------

 

 

 

Apart from shielded by a full kit, we recommend at least the headlamp, tank, front head cowl (sai tao) portion & front fender shielded. Seems to be the main concern for most of the bikes.

 

06~07 R6 now comes with Option kit. Full+option is also available

 

http://www.ar2performance.com/forums/2006-R6-option.jpg

 

2006~2007 / Yamaha / YZF-R6 (option)

 

TOTAL COVERAGE :- 5 PIECES

 

1) Enhanced Tank pad ©

2) Undertray ®

3) Fork tube (L)

4) Fork tube ®

 

 

You can refer to --> http://www.singaporebikes.com/forums/showthread.php?t=139008 as we just replied another biker of an R6 & Super4 (thats why its in the Honda Thread)

 

-----------------------------------------------------------------------------------------------------------------------

 

 

 

We hope the above information is clear & suffice your doubt or inquiries. Nevertheless, you can still call us for more questions! .