[Group] YAMAHA Rx, Rx-S & Rx-K

[pish]

hmmmm it seems most of the kakis living in the west aye.....no east side kakis? oh well sg is small anyways wakakakakakaka

[ProFatSir]

Hey Tony. By buying new one you mean buy oil seal or what? I want to change exhaust the 'end can' cause mine is damn rusted and ugly already.

 

buy the whole exhaust from united

replace the oilseal at work shop

ask them to install the exhaust for u.

[ProFatSir]

Tony bro,

 

any suggestions to improve my braking performance? I feel there's a delay when i have to jam brake during road conditions.

 

my front and rear is drum brake!!!

who ride needs more brakes???

 

option for you to change is.

 

use RXZ oversize brake disc,steel brake hose and 6 port caliper.

comfirm you will fall in front.

[dolphin22]

buy the whole exhaust from united

replace the oilseal at work shop

ask them to install the exhaust for u.

 

roughly how much for the whole pipe?

[dolphin22]

my front and rear is drum brake!!!

who ride needs more brakes???

 

option for you to change is.

 

use RXZ oversize brake disc,steel brake hose and 6 port caliper.

comfirm you will fall in front.

 

whats the diff between drum brake and other type of brake?

[qeith]

dolphin- i think the main things you should look to mod are your: seats, paintwork and handlebar. same as me

 

acap- i'm still undecided between army green, black or some retro neon colour. haha!

 

qeith- i might be heading down chia heng tmr to look for rx100 saddle.

 

Okay bro. Chia Heng at Desker Road right? How do I get there?

 

About what time are you heading there anyway?

[ProFatSir]

roughly how much for the whole pipe?

 

what you can do to saVE $

 

spary the pipe, black using high temp spary 8.50dollar

 

i dun work for united.

[ProFatSir]

whats the diff between drum brake and other type of brake?

 

rxk is front disc,rear drum

 

CG is is front,rear drum.

 

what you can do is try changing steel brake hose,brake pad."FRONT"

 

rear not brake is ok.just tighten the nut.

 

ask weileo he also wanna change maybe you 2 person can share to buy a better brand make hose.

[ProFatSir]

chia heng many rx100 seat.today i went there see things.

[sabrove]

你在讲什么？？？

马来文很多人不会看。。。

 

Sentiments exactly...

 

 

Come on lah bros. Dun need to fight fire with fire. Just becoz some of us here forget and type in their mother tongue, u dun need to open ur Microsoft words and type in Mandarin then cut and paste here rite. Mly is a language that uses English Alphabet and its convenience tat pple tend to just type out in Mly. Patience is a virute. I apologise on behalf of my fren. Maybe some of us here not so use to speaking English to our Mly frens, so it takes time to get used to it. And thanks to Ah-Xing for tolerating us as we tend to speak Mly most of the time when he hang out with us. Thanks Bro.

Edited April 15, 2009 by sabrove

[Heyrul77]

Hi,

Anyone knows where can i get RX100 seat? Be it second hand or original..

[sabrove]

roughly how much for the whole pipe?

 

The last time i ask @ chia heng, he quote $50 for Made in Taiwan one.

[cerealkiller]

@pish - i live along east coast road yourself?

 

qeith - prolly 2-3pm, maybe 5-6pm? i've pm-ed you my number. gimme a call or text if you wanna join me and my friend!

 

tony - thanks for the help regarding rx100 seat! i'll call you after i settle my saddle

[dolphin22]

The last time i ask @ chia heng, he quote $50 for Made in Taiwan one.

 

Thanks bud.

[qeith]

buy the whole exhaust from united

replace the oilseal at work shop

ask them to install the exhaust for u.

 

Okay sounds good! I don't mind paying the money if my bike looks good. Gonna buy a new one maybe tomorrow. Took leave already. Thanks Tony.

[qeith]

@pish - i live along east coast road yourself?

 

qeith - prolly 2-3pm, maybe 5-6pm? i've pm-ed you my number. gimme a call or text if you wanna join me and my friend!

 

tony - thanks for the help regarding rx100 seat! i'll call you after i settle my saddle

 

Hey. I'll call you later in the afternoon. Not too sure whether I can make it, cause tonight have to go for dinner. Actually if you all going tomorrow will be better for me ah. Not so rush plus Friday can relax a bit.

[ProFatSir]

Come on lah bros. Dun need to fight fire with fire. Just becoz some of us here forget and type in their mother tongue, u dun need to open ur Microsoft words and type in Mandarin then cut and paste here rite. Mly is a language that uses English Alphabet and its convenience tat pple tend to just type out in Mly. Patience is a virute. I apologise on behalf of my fren. Maybe some of us here not so use to speaking English to our Mly frens, so it takes time to get used to it. And thanks to Ah-Xing for tolerating us as we tend to speak Mly most of the time when he hang out with us. Thanks Bro.

 

fiy no need to open microsoft words to type in the chinese words.just a click and change change the english into han yu pin yi and can start typing.can also type japanese,thai and many more just go to

control panel

regional and language options

and do the setting.

 

 

if need ask them to quote the msg the TS start and it belong to a private msg between TS and replier.so ppl understand.

 

its not the fault that ppl tends to speaks or write in the mother language.

ah xing must learnt more malay.:angel:

 

i do understand malay a bit but for the sake of other non malay speaking members pls use english.

[MUSHA]

Come on lah bros. Dun need to fight fire with fire. Just becoz some of us here forget and type in their mother tongue, u dun need to open ur Microsoft words and type in Mandarin then cut and paste here rite. Mly is a language that uses English Alphabet and its convenience tat pple tend to just type out in Mly. Patience is a virute. I apologise on behalf of my fren. Maybe some of us here not so use to speaking English to our Mly frens, so it takes time to get used to it. And thanks to Ah-Xing for tolerating us as we tend to speak Mly most of the time when he hang out with us. Thanks Bro.

 

In all honesty, Tony and I are not creating fire, nor fighting fire (with fire). Do not be offended. It is a English Forum here and it is only fair for all to understand each other in a multi-language society here.

 

I feel that apology is not require here as we are not here to remand anyone. Stay cool, the forum is free for all.

[Lord Bear]

Is it possible tat we change the meet-up venue to Kallang KFC instead cos Saturday parking difficult lah? Same time, 8.30pm.

 

For those who dun noe where Kallang KFC is? Its near the Stadium area. C u there.

[pish]

huhu....ok lah2 my bad k i apologize.....later meet up wane beat me can beat k i accept coz my fault...... hehe...joking k wakakakaka..plz dun beat me..but yah i understand how u guys feel...n i apologize for it.....so how many of u coming tiz sat?

 

cerealkiller: yay...i live eunos ar bro

[qeith]

Wah serious ah. So far. I coming from West Coast Park there.

[ben1112]

Guys i got myself a tzr last month i think im gonna sell off the rxk. So if anyone interested or have frens who are pls pm me for number okay?

 

My RXK has done alot of things including but not limited to:

TZM Fast throttle

Brake pump

POSH Handlebar

Wheel bearing

Headlight

brake hose

Yoshimura Grip

Fork seal

clutch

Rim

Tyre

Piston+ ring

Balancer

mirror

meter

signals

café fairing

clutch plate

clutch spring

clutch bushing

clutch cable

 

Spent about 900 on it. Any reasonable offers will be considered.

[qeith]

Guys i got myself a tzr last month i think im gonna sell off the rxk. So if anyone interested or have frens who are pls pm me for number okay?

 

My RXK has done alot of things including but not limited to:

TZM Fast throttle

Brake pump

POSH Handlebar

Wheel bearing

Headlight

brake hose

Yoshimura Grip

Fork seal

clutch

Rim

Tyre

Piston+ ring

Balancer

mirror

meter

signals

café fairing

clutch plate

clutch spring

clutch bushing

clutch cable

 

Spent about 900 on it. Any reasonable offers will be considered.

 

Hi bro. I am interested in your Yoshi grips, clutch, tires (esp rear), cafe fairing. Please get back to me asap at 81281021. Keith here. Thanks.

[dolphin22]

Just realised got a tear near the carb. Can anyone advise and how much to fix it

[ProFatSir]

Just realised got a tear near the carb. Can anyone advise and how much to fix it

 

can be change.

go workshop or chia heng