[Discussion] Technical - Cosmetic Modifications

[epicflame37]

by the way hv to ask u guys, can hand guards of scrambler types be fitted on a super four vtec stock bar or u need a fatbar or renthal to fix it? need some help guys.. thanx

[pyro13]

by the way hv to ask u guys, can hand guards of scrambler types be fitted on a super four vtec stock bar or u need a fatbar or renthal to fix it? need some help guys.. thanx

 

U can fid d one withput the metal handframe as it a bolt on. But it will look funny if u do it witout a scrambler handlebar..

[epicflame37]

ic... thanx for the advice pyro..

[pyro13]

ic... thanx for the advice pyro..

 

Welcome.. I tink cmo thread, ters a persom selling handguards. Or ahboy has Zeta lookalike handguards

[World Misanthropy]

Anyone knows which shop sells handlebar risers? And how much? Thanks!

[pyro13]

Anyone knows which shop sells handlebar risers? And how much? Thanks!

 

Try chong aik.. But wat handlebar? Scrambler or stock?

[World Misanthropy]

Try chong aik.. But wat handlebar? Scrambler or stock?

 

Stock bro. Thanks i will give chong aik a call then.

[world of sin]

Hi all,recently I went to a shop selling Showa rear shocks and one of the staff said that it's from Thailand,is the original Showa comes from Thailand?is there any difference?n they quoted 800 bucks plus installation?thanks ..

[ResmeN]

V-tecs tank is the same across all the range. No worries.

I am after a BAGSTER CB400 Tank Protector with Red Wings: $185 my 08 revo but unique motorsports are out of stock, they most likely will not have any for a long time and only have below:

 

We have the following in stock:

Black: $165

Black with silver wing: $185

Black with tribal design (silver): $185

 

Anywhere other than um that I would be able to get the protector with red wing? Btw I am in Australia so will need to pay vendor via paypal and they will post item to me.

[KerplunkZ]

Hi all,recently I went to a shop selling Showa rear shocks and one of the staff said that it's from Thailand,is the original Showa comes from Thailand?is there any difference?n they quoted 800 bucks plus installation?thanks ..

 

if 800, i rather u get bitubo without canister =D or add a lil more for Ohlin.

[KerplunkZ]

I am after a BAGSTER CB400 Tank Protector with Red Wings: $185 my 08 revo but unique motorsports are out of stock, they most likely will not have any for a long time and only have below:

 

We have the following in stock:

Black: $165

Black with silver wing: $185

Black with tribal design (silver): $185

 

Anywhere other than um that I would be able to get the protector with red wing? Btw I am in Australia so will need to pay vendor via paypal and they will post item to me.

 

isnt it better for u to just deal straight from bagster ?

[KerplunkZ]

Stock bro. Thanks i will give chong aik a call then.

 

i juz changed my far bar and raiser back to stock. cost me not more then SGD$200. original brand new.

that raiser is more EX then the handlebar. geez. and they sell 1 piece by 1 piece as in for both raiser = 4 piece. >.

[ResmeN]

isnt it better for u to just deal straight from bagster ?

That was my first course of action but after not replying to countless emails I sent them I then posted here. Might try to give them a call but a bit hard due to time difference. Prefer dealing with Singaporeans as they rock

[boi_69]

where to buy inverted fork for s4 vtec 3/??

[boi_69]

anione noes where to buy inverted fork for s4 spec 3???

[dragonforce]

anione noes where to buy inverted fork for s4 spec 3???

 

inverted forks will take some work.. try to find rvf or gsxr400 scrapped then you can purchase the forks..

[static369]

Good evening guys, are there any other kind of rear huggers other than the 'devil' type. Because I see that the 'devil' huggers don't fit very well. Not like those enermax ones for biggers bikes... I was just wondering only guys. Thank you for your inputs...

[boi_69]

inverted forks will take some work.. try to find rvf or gsxr400 scrapped then you can purchase the forks..

 

thanks for the info bro....is there ani chance dat ohlins hav fork for s4??

[thrasher]

i think you going to do some fabricating work on the triple clamp. and also see if the size is the same for the forks. from what i know our standard showa forks are 41mm correct me if i'm wrong?

 

thanks for the info bro....is there ani chance dat ohlins hav fork for s4??

[Fazli]

i think you going to do some fabricating work on the triple clamp. and also see if the size is the same for the forks. from what i know our standard showa forks are 41mm correct me if i'm wrong?

 

Yes they are 41mm. If you want to convert to inverted forks, quite a lot of work to be done. You need a set of triple clamps that can fit your inverted forks. Front fender also needs replacement. Newer inverted forks comes as a standard for radial mount calipers. So either you get a bracket that mounts radially to the fork and your existing calipers or you get a pair of radial mount calipers. Don't forget that its not easy to find a matching triple clamps that will fit perfectly with your existing rims or else you either change rims or fabricate shims/spacers.

[KerplunkZ]

Yes they are 41mm. If you want to convert to inverted forks, quite a lot of work to be done. You need a set of triple clamps that can fit your inverted forks. Front fender also needs replacement. Newer inverted forks comes as a standard for radial mount calipers. So either you get a bracket that mounts radially to the fork and your existing calipers or you get a pair of radial mount calipers. Don't forget that its not easy to find a matching triple clamps that will fit perfectly with your existing rims or else you either change rims or fabricate shims/spacers.

 

after all that, i dont think its worth it =x. just my pov.

[pyro13]

I agree.. It will easily set u back by 2k. Wen u wanna sell ur boke, d next owner wun appreciate it.

[Fazli]

For me if I want to do, I make sure I do it right and keep the bike. And the cost will definitly be more than 2K. Showa has inverted forks. Can check out the link below for suspension for our bikes.

 

K-Tech UK - CB400 Super Four

[boi_69]

For me if I want to do, I make sure I do it right and keep the bike. And the cost will definitly be more than 2K. Showa has inverted forks. Can check out the link below for suspension for our bikes.

 

K-Tech UK - CB400 Super Four

 

Is it suitable for our bike bro??

[thrasher]

yeah man. i mean, i'd get a bike that has standard inverted fork, and probably change the internals to suit my style of riding better. its a wiser investment rather than a complete fork, clamp, fender upgrade. for the whole cost of the upgrade, i think can get me another bike with inverted forks. yo fazli, i'm always ard cck, teck whye area, i never seen u ard?