[Group] Singapore BAJAJ Team (SBT)

[speedaddict]

Every bike has its pros and cons. I've just got a 200ns, my 2nd pulsar and I've got to say its higher than s4.

 

Tiptoeing is not a problem cause once you move off you won't need to. Bike looks good and doesn't vibrate as much as the old pulsar.

 

Once you learn how to replace your own engine oil should be no problem.

Last but not least we are a very fun and friendly group. Welcome to Pulsarians Singapore!

[Hoaxxx]

I have 3 storage boxes to clear. Pulsarians please contact me for special price. Models available are:

 

Kappa 46L

Givi E45

Givi E20N

 

Also have a short 12 inch Givi rack and Givi Wing Rack if anyone is interested.

 

Collection for items at my void deck only due to size.

 

Anyone looking for new 200ns rack. Fits bajaj 180 200 also.

www.singaporebikes.com/forums/showthread.php/375729-bajaj-pulsar-200ns-rack-givi-kappa-hr4m?p=7828152#post7828152

 

 

 

Hey there, I just paid my deposit for Pulsar 200NS should be getting it by the end of this week. Am interested in getting a rack and top box for it. How much would the rack + top box cost?

 

P.S Rushed down to UM today after after reading your blog review which Fadly linked me.

[Strawberrydonut]

Every bike has its pros and cons. I've just got a 200ns, my 2nd pulsar and I've got to say its higher than s4.

 

Tiptoeing is not a problem cause once you move off you won't need to. Bike looks good and doesn't vibrate as much as the old pulsar.

 

Once you learn how to replace your own engine oil should be no problem.

Last but not least we are a very fun and friendly group. Welcome to Pulsarians Singapore!

 

replacing own engine oil would be good but disposing it would be a hassle thats why i never bothered to change it on my own.

 

to be honest i have seen fellow bikers dumping the used eo under the drain after changing it..... talk about being irresponsible:sian:

[m0bIlEnErD]

Hey there, I just paid my deposit for Pulsar 200NS should be getting it by the end of this week. Am interested in getting a rack and top box for it. How much would the rack + top box cost?

 

P.S Rushed down to UM today after after reading your blog review which Fadly linked me.

 

UM sells the rack for $85 iirc. Box prices depends on which size and brand. Can range from $70 onwards.

[Hoaxxx]

UM sells the rack for $85 iirc. Box prices depends on which size and brand. Can range from $70 onwards.

 

if I get the rack from you I can fix other boxed other than the ones from UM right? Is yours still for sale?

[m0bIlEnErD]

if I get the rack from you I can fix other boxed other than the ones from UM right? Is yours still for sale?

 

You can fix almost any box on it as long as you have the baseplate for it. Baseplates usually come with the box.

[ak43]

Does 200NS come with main stand in Singapore or is it optional? If so how much?

[Hoaxxx]

Does 200NS come with main stand in Singapore or is it optional? If so how much?

 

It comes as an accessory but nice guy David gave it to me foc when I said I didn't need the free helmet or raincoat when I ordered mine.

[Hoaxxx]

Double post

[alvinyansg]

Does 200NS come with main stand in Singapore or is it optional? If so how much?

 

main stand is optional...

if nv mb wrong is $60...

[Romi_ku]

main stand is optional...

if nv mb wrong is $60...

 

just fixed mine today.. 65bux for mainstand and 10 bux for labour..

[m0bIlEnErD]

Pulsarians Makan Session - Let's Gather and Chat

 

http://i43.photobucket.com/albums/e378/mobilenerd/btwo/538589_388762754549007_1682007818_n.jpg

http://i43.photobucket.com/albums/e378/mobilenerd/btwo/303634_388762361215713_2056341677_n.jpg

http://i43.photobucket.com/albums/e378/mobilenerd/btwo/GoogleSeraiMakanPlace.jpg

http://i43.photobucket.com/albums/e378/mobilenerd/btwo/SeraiMakanPlace.jpg

 

Date: 30th Jan 2013 (Wednesday)

Place: 55 Changi Road (Serai Makan Place) Old Singapura Theatre

Time: 2100hrs- 2300hrs

 

Please remember to park neatly at the side and do not obstruct anyone. For new comers wanting to join us, just park your bike and wave at the tables, we will see you.

 

All ex and future Bajaj riders are welcome to join us to share information about your bikes.

 

 

[alvinyansg]

for those who missed the convoy and SBF 11th Anniversary, here are some videos of the convoy and event...

 

Singapore Bike Forum Anniversary 2013 - Pulsarian Edition (Director's Cut)

 

 

Pulsarians Singapore Arrival @ Scape

 

http://youtu.be/wik_4gcGbX8

 

Pulsarians Singapore Convoy to Scape - 27 Jan 2013

 

[Cyberpig]

@Cyberpig is that you i just saw on KJE exiting to CCK? (25 Jan, around 6.10-20pm)...

i am riding behind you in the black NC...

your box is vibrating and shaking very badly...

suggest you take a look at the base plate mounting, maybe add some more support plates at the bottom...

 

Yup.. must be me.

 

Where can I get additional support to dampen the vibration? I saw some bikes with a styrofoam like layer between the box and base rack. Is this the one? Also seems like it is the entire rack "flexing" causing the shaking. Not sure if this is normal or the rack is unsuitable. UM suggested mounting a Kappa 46 or 47 liter (don't remember which) box when I installed the rack so don't problem is because my box (Givi V47) is too big.

[alvinyansg]

Yup.. must be me.

 

Where can I get additional support to dampen the vibration? I saw some bikes with a styrofoam like layer between the box and base rack. Is this the one? Also seems like it is the entire rack "flexing" causing the shaking. Not sure if this is normal or the rack is unsuitable. UM suggested mounting a Kappa 46 or 47 liter (don't remember which) box when I installed the rack so don't problem is because my box (Givi V47) is too big.

 

think need to look at 2 areas...

your box and rack mounting points....

think take a look at the rack mounting points 1st...

[Strawberrydonut]

for those who missed the convoy and SBF 11th Anniversary, here are some videos of the convoy and event...

 

Singapore Bike Forum Anniversary 2013 - Pulsarian Edition (Director's Cut)

 

 

Pulsarians Singapore Arrival @ Scape

 

http://youtu.be/wik_4gcGbX8

 

Pulsarians Singapore Convoy to Scape - 27 Jan 2013

 

 

nice awesome videos u have,what kinda camera were you using alvin?

[m0bIlEnErD]

The hr4m rack used by um is a little high. Especially after you add the box.

The wind buffet will be higher. I suggest you try and take a look at the rack I did for the 200ns. Using spec 2 rack. It lowers the rack by about 2 inches. And the weak point where they mount to the foot peg area is not a bracket but welded.

[m0bIlEnErD]

Yup.. must be me.

 

Where can I get additional support to dampen the vibration? I saw some bikes with a styrofoam like layer between the box and base rack. Is this the one? Also seems like it is the entire rack "flexing" causing the shaking. Not sure if this is normal or the rack is unsuitable. UM suggested mounting a Kappa 46 or 47 liter (don't remember which) box when I installed the rack so don't problem is because my box (Givi V47) is too big.

 

Try placing a thin towel between the box and baseplate. Alternatively cut a rubber tube from old tyres. Should help dampen.

[alvinyansg]

nice awesome videos u have,what kinda camera were you using alvin?

 

 

Only the last video is my...

The other 2 is from uncle mj n khairul...

I am using gopro hero hd1...

[thalal]

does anyone have UG1 spare parts manual? or can give me link to dl..thanks

[Hoaxxx]

Hey guys, will probably be collecting my 200NS on Monday according to David.. Would like to ask how did you guys break in the engine? Just ride to and fro work/home at 60km/h or as i have read most of you exceeded that eventually. Or do you guys recommend hard breaking as another forumer has posted via this link. http://www.mototuneusa.com/break_in_secrets.htm? Wondering which road would be good to do this though.. Oh and max RPM is 10000? This is the first time I'm getting a brand new bike so I'm quite worried lol..

[Romi_ku]

left my bike at um for them to wash carb or check whats gg on with my prob.. engine still dying for no reason.. prolly will just collect it on monday.

 

btw @m0bIlEnErD, where can i get the rack which u mentioned will be lower and suitable? cos i be getting the SHAD33.

[m0bIlEnErD]

I suggest you come for the next PMS to see the rack. If you are okay with it then I refer you.

[Cyberpig]

The hr4m rack used by um is a little high. Especially after you add the box.

The wind buffet will be higher. I suggest you try and take a look at the rack I did for the 200ns. Using spec 2 rack. It lowers the rack by about 2 inches. And the weak point where they mount to the foot peg area is not a bracket but welded.

 

Hi bro, can share some pics of your rack? Where did U get it installed and what was the damage?

[calebike]

hi bros, looking to get a 2nd hand pulsar 180/200. do pm me if you have lobang.