[Group] Singapore BAJAJ Team (SBT)

[mjbs64]

Hmm do you think it has sth to do with the cluth housing? Because my mech said it has worn out and needs to be replaced. But I doubt that is the cause. Right after I topped up my engine oil blindly,I could immediately feel the stiffness in gear change and it was very difficult to find neutral.

 

I went to my mech just now and he changed my front brake pads(my brake pads were worn out to the max) for $24 and he said the brake ____(forgot the name,near the brake disk) was dented which caused the brake to jam.

 

since our bike is a wet clutch .. meaning it needs oil for lubrication to perform but stilll will wear off and losing it's energy in the liquid in the period of time ..

unless your engine oil is dirty, yes maybe it can affect the smoothness during the transmission ..

but you stated top up and not change

so since when your last EO in your bike change and what oil did you use? ... mineral, semi or fs?

 

have you change the clutch plates before?

if so when?

 

I think your mech is right to ask you to change the clutch plates.

Do remember some parts the wear and tear are much faster than the manual stated .. it depends on luck too ...

 

hmm happens to me with my dry cell battery ... been recomended to change to dry cell from wet batt at UM, so give a try and just recently after 4 months using it .. the cover of the battery breaks and my battery fluid leakage without knowing it .. keeps wondering why lately a white powderish all over under my seat .. upon checking found that the powderish comes from the corroded battery holder ... went to UM and ask why .. hmm stated this is the first time they encounter this pproblem ... fight for my right there since I just used it for 4 months .. FAILED to get full compensation .. UM just gave me 10% less the cost price ... frustrated but understood that's life .. somedays are yours and somedays it just not your day ....

 

since my temperature sensor also keep popping out, replace a new sensor and the sensor back to normal .. oh it cost you $12.

 

replace also that little rubber at the slot to lock your side cover .. it cost you $1 each .. I fight for foc and I managed to save my $1 .. hehehehhe

 

hmmmmm am I sound different .. issit me? really issit me to fight for $1 .... hahahahahahahahah

 

Transformers 3 coming 1st july 2011 .... be an autobot or decepticon? .. the truth is out there heheheheheheh

 

have a safe ride ok

Edited July 21, 2010 by mjbs64

[SC Gaban]

since our bike is a wet clutch .. meaning it needs oil for lubrication to perform but stilll will wear off and losing it's energy in the liquid in the period of time ..

unless your engine oil is dirty, yes maybe it can affect the smoothness during the transmission ..

but you stated top up and not change

so since when your last EO in your bike change and what oil did you use? ... mineral, semi or fs?

 

have you change the clutch plates before?

if so when?

 

I think your mech is right to ask you to change the clutch plates.

Do remember some parts the wear and tear are much faster than the manual stated .. it depends on luck too ...

 

hmm happens to me with my dry cell battery ... been recomended to change to dry cell from wet batt at UM, so give a try and just recently after 4 months using it .. the cover of the battery breaks and my battery fluid leakage without knowing it .. keeps wondering why lately a white powderish all over under my seat .. upon checking found that the powderish comes from the corroded battery holder ... went to UM and ask why .. hmm stated this is the first time they encounter this pproblem ... fight for my right there since I just used it for 4 months .. FAILED to get full compensation .. UM just gave me 10% less the cost price ... frustrated but understood that's life .. somedays are yours and somedays it just not your day ....

 

since my temperature sensor also keep popping out, replace a new sensor and the sensor back to normal .. oh it cost you $12.

 

replace also that little rubber at the slot to lock your side cover .. it cost you $1 each .. I fight for foc and I managed to save my $1 .. hehehehhe

 

hmmmmm am I sound different .. issit me? really issit me to fight for $1 .... hahahahahahahahah

 

Transformers 3 coming 1st july 2011 .... be an autobot or decepticon? .. the truth is out there heheheheheheh

 

have a safe ride ok

 

"u gota fight, for ur right. oyoi, oyoi" - bob marley. smoke weeds.

[Eliminator]

since our bike is a wet clutch .. meaning it needs oil for lubrication to perform but stilll will wear off and losing it's energy in the liquid in the period of time ..

unless your engine oil is dirty, yes maybe it can affect the smoothness during the transmission ..

but you stated top up and not change

so since when your last EO in your bike change and what oil did you use? ... mineral, semi or fs?

 

have you change the clutch plates before?

if so when?

 

I think your mech is right to ask you to change the clutch plates.

Do remember some parts the wear and tear are much faster than the manual stated .. it depends on luck too ...

 

hmm happens to me with my dry cell battery ... been recomended to change to dry cell from wet batt at UM, so give a try and just recently after 4 months using it .. the cover of the battery breaks and my battery fluid leakage without knowing it .. keeps wondering why lately a white powderish all over under my seat .. upon checking found that the powderish comes from the corroded battery holder ... went to UM and ask why .. hmm stated this is the first time they encounter this pproblem ... fight for my right there since I just used it for 4 months .. FAILED to get full compensation .. UM just gave me 10% less the cost price ... frustrated but understood that's life .. somedays are yours and somedays it just not your day ....

 

since my temperature sensor also keep popping out, replace a new sensor and the sensor back to normal .. oh it cost you $12.

 

replace also that little rubber at the slot to lock your side cover .. it cost you $1 each .. I fight for foc and I managed to save my $1 .. hehehehhe

 

hmmmmm am I sound different .. issit me? really issit me to fight for $1 .... hahahahahahahahah

 

Transformers 3 coming 1st july 2011 .... be an autobot or decepticon? .. the truth is out there heheheheheheh

 

have a safe ride ok

 

I usually use Bardhal 20-50W EO.Then I topped up with Shell 20-40W EO.The cheap2 one.$10 only.

[ORen]

imo, i find that our lights is enough for sg roads. almost all our roads r brightly lit, so there's no point in getting brighter bulbs to blind someone.

 

however if i'm constantly travelling in m'sia on those dark roads, i might want to find alternatives to get brighter lights.

 

O'ren, stick to the original lights are the best. Dun bother upgrading the lights la. will cost u more damage in time to come.

 

Hey Lindavw ! Good to see you again, I missed you ! ( a liiiiittle bit ok!)

Yeah, I was a bit worried for the future: I hope to be able to travel with my bike more and more, especially since I got the touring virus at my first trip to Malaysia with SBT ! And I'm a bit worried about how efficient the lights are on dark roads. SG definitely no problem at all, but outside..

 

"sai tao" is dialect for lion head, u know when there's a festival, usually new year, there's a lion dance where 2 ppl hidden in a lion costume holding a lion head and the do tricks n stunts.

 

it's the cowling that house the main lights and pilot lights, i also dont know what the proper word for it also.

 

Oh I see, I'll look for it on the bike tonight, see if I see what you're referring to. Thanks for the translation and explanation ! I like those lions stunts and all, except when they rehearse on Sunday below my apartment window

 

ohh fyi too ... cookie, myself and hvc have been tracking the 4 W's to get the source to install the rear brake disk .. currently at Prides ... hmmmmmm think Gaban can answer when mentioning Prides .. he and hvc are very active there .. active with 2 reasons .. 1 for info on pulsar and 2 ... hmmm seggeeeer hahahahhaha

 

4 W's ?I see, well keep me updated will ya please ? If there's a way to get a rear brake disc, i'm in - if not too expensive and if safe for the bike's longterm health !

 

comes 1st July 2011 ... BTMO for that month ... pulsarians roll out and watch Transformers 3 :cheers:

 

It's in 1 year, so far !

 

Will send PO to Sinnob and will update all updates from time to time. Thank you and all the BEST for YOUR RIDE with SINNOB GEAR SPROCKETS.

 

Thanks you thank you

 

my bike totally blacked out. think due to fault battery which cant charge or fault rectifier that dun charge the batt.

 

It's because it misses its pulsar friends from our group ! It's sending you a message: "I'm lonely, get me to SBT meetings!" :angel:

[arthur_chan]

Yeah, I was a bit worried for the future: I hope to be able to travel with my bike more and more, especially since I got the touring virus at my first trip to Malaysia with SBT ! And I'm a bit worried about how efficient the lights are on dark roads. SG definitely no problem at all, but outside..

 

 

if i were alone, i'll prob worry about lights, however on trips, we are in a group. so there isn't much worry.

 

unless u're thinking of venturing like gaban...

[ORen]

hmm happens to me with my dry cell battery ... been recomended to change to dry cell from wet batt at UM, so give a try and just recently after 4 months using it .. the cover of the battery breaks and my battery fluid leakage without knowing it .. keeps wondering why lately a white powderish all over under my seat .. upon checking found that the powderish comes from the corroded battery holder ... went to UM and ask why .. hmm stated this is the first time they encounter this pproblem ... fight for my right there since I just used it for 4 months .. FAILED to get full compensation .. UM just gave me 10% less the cost price ... frustrated but understood that's life .. somedays are yours and somedays it just not your day ....

 

How long is the stock battery supposed to last ? Any tail signs that would let me know when it's coming close to die? (Meaning I'm trying to avoid discovering it's dead in the middle of the expressway...)

How much did you pay for the dry battery ?

 

since my temperature sensor also keep popping out, replace a new sensor and the sensor back to normal .. oh it cost you $12.

 

replace also that little rubber at the slot to lock your side cover .. it cost you $1 each .. I fight for foc and I managed to save my $1 .. hehehehhe

 

hmmmmm am I sound different .. issit me? really issit me to fight for $1 .... hahahahahahahahah

 

have a safe ride ok

 

Honestly sometimes UM prices are a bit frustrating. Went there to have them unscrew 2 screws from the hella horns that I couldn't unscrew myself, and put the original brackets in place. So really it's unscrew/put bracket/screw back, on each side of the bike. Total time 30sec per side and a little bit of human strength with the right tool.

They charged me $4. When I KNOW the whole installation of the horns, including the wiring, is about $5-$6. So I knew they were literally chopping me into decorative salad carrot topping. But I signed, and I payed, and I smiled. What goes around comes around, we'll see next servicing how....

 

You'd think a customer like you, who always recommends them and goes to see them every now and then, for minor to bigger stuff, they'd ry to entertain, and say ok lah, 2 rubbers for free 'cause you come often. Tssssssss:dot::dot::dot::dot:

[Brandonwang]

 

 

Honestly sometimes UM prices are a bit frustrating. Went there to have them unscrew 2 screws from the hella horns that I couldn't unscrew myself, and put the original brackets in place. So really it's unscrew/put bracket/screw back, on each side of the bike. Total time 30sec per side and a little bit of human strength with the right tool.

They charged me $4. When I KNOW the whole installation of the horns, including the wiring, is about $5-$6. So I knew they were literally chopping me into decorative salad carrot topping. But I signed, and I payed, and I smiled. What goes around comes around, we'll see next servicing how....

 

You'd think a customer like you, who always recommends them and goes to see them every now and then, for minor to bigger stuff, they'd ry to entertain, and say ok lah, 2 rubbers for free 'cause you come often. Tssssssss:dot::dot::dot::dot:

 

$4 give them lor, I'm the NO.1 carrot that fix my hella for $20. HUAT AH!!!!

[ORen]

At least they did the whole thing for you. Me they only screwed 2 nuts... :nono: :nono:

[Brandonwang]

At least they did the whole thing for you. Me they only screwed 2 nuts... :nono: :nono:

 

Standing from your point of view $4 for screwing & unscrewing is not worth paying but knowing that installation of the horns cost only $5 - $6, and i paid like 4 times more I duno how 2 explain that feeling SHIOK AH!!!!

[SC Gaban]

Off topic, I know dis is lame, but I’ll do it anyway.

 

How to cook Maggie goreng.

 

Step 1:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08410.jpg

Prepare the necessary items/ingredients. For my case, im gona use 1 packet of Maggie and 2 eggs. Simple no?

 

Step 2:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08411.jpg

boil the Maggie on the pot. I dun have to say much. Even a kid can understand.

But dun put the spice yet.

 

Step 3:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08412.jpg

after the Maggie is soften and broke up, pour onto jug and wait for it to cool down around 5-10min just like in the pic.

 

Optional step:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08424.jpg

while waiting for it to cool down, do whatever u like, as for me, playing my favourite ps2.

 

Step 4:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08413.jpg

after the wait is over, prepare the frying pan or ‘kuali;. Cooking oil amount? Well, it varies individually. As for me, see the pic.

 

Step 5:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08417.jpg

turn on the gas and lower the flames, and wait for it to get hot.

 

Step 6:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08414.jpg

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08415.jpg

while waiting for the frying pan, in my case, I crack open 2 eggs and beat them up.

It up to you whether u want to prepare some veggie,meat ot whatever.

 

Step 7:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08418.jpg

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08419.jpg

when the pan is hot enough ( still use low flames), pour any ingredients into the pan.

In my case, are the eggs and fry them halfway. Don’t cook too long. Take about less than 15 secs.

 

 

Step8:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08420.jpg

add the Maggie into the pan and mixed it with the eggs or any ingredients for a few secs.

 

Step 9:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08416.jpg

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08421.jpg

while still in low flames, open up the spice and add to the pan as shown above.

 

Step 10:

http://i674.photobucket.com/albums/vv109/Gaban84/DSC08422.jpg

Now, mixed it up with the rest for a min or 2 until a nice scent is produce.

 

Step 11:

http://i674.photobucket.com/albums/vv109/Gaban84/edit.jpg

if u think its cooked, then put it on a plate or watever serve. WALAAH!!!

Easy no? btw, use low flames all the way.

[husher]

Wow!!, will try that soon..-ur signature should go like this-if gaban can cook, so can you...

[speedaddict]

still can't beat AsSalam maggi goreng lah... haha

[mjbs64]

Wow!!, will try that soon..-ur signature should go like this-if gaban can cook, so can you...

 

still can't beat AsSalam maggi goreng lah... haha

 

hahahahha ... SBT DIY sessions from another angle hehehehe

 

way to go gaban .. and speed .. HomeFix taste DELICIOUSSSSSS .... next time I post too ... my maggie goreng version hahahahaa

 

BUT now .. motor talk ...

 

DO IT YOURSELF BUT AT OWN RISK ...

 

1: How to do a Wheelie wif your Pulsar - MTV Pulsar Stunt Mania

 

http://www.youtube.com/watch?v=fAFCFz2exHA

 

2: How to BurnOUT ...

 

http://www.youtube.com/watch?v=OEIWGWoU_Ww&feature=related

 

3: How To High Chair on Bikes 720P

 

http://www.youtube.com/watch?v=3WnzZBZav_E&feature=related

 

4: How to do a Stoppie - The Allan Amin Guide

 

http://www.youtube.com/watch?v=wml7ZbClhPM&feature=related

 

and who says Bajaj Pulsar is just an India bike?

 

POISON = RACUN

Edited July 21, 2010 by mjbs64

[samlimyk]

o'lene u here?how's ur suzuki gsx400?:thumb::thumb:add me msn:[email protected]

[SC Gaban]

o'lene u here?how's ur suzuki gsx400?:thumb::thumb:add me msn:[email protected]

 

u looking for olene or oren? or orleng? naah, i had a friend riding a gsr 400, not gsx400.

[husher]

hahahahha ... SBT DIY sessions from another angle hehehehe

 

way to go gaban .. and speed .. HomeFix taste DELICIOUSSSSSS .... next time I post too ... my maggie goreng version hahahahaa

 

BUT now .. motor talk ...

 

DO IT YOURSELF BUT AT OWN RISK ...

 

1: How to do a Wheelie wif your Pulsar - MTV Pulsar Stunt Mania

 

http://www.youtube.com/watch?v=fAFCFz2exHA

 

2: How to BurnOUT ...

 

http://www.youtube.com/watch?v=OEIWGWoU_Ww&feature=related

 

3: How To High Chair on Bikes 720P

 

http://www.youtube.com/watch?v=3WnzZBZav_E&feature=related

 

4: How to do a Stoppie - The Allan Amin Guide

 

http://www.youtube.com/watch?v=wml7ZbClhPM&feature=related

 

and who says Bajaj Pulsar is just an India bike?

 

POISON = RACUN

 

Alamak mj!!, u bad example..tsk tsk tsk..soon mr tp will lookout especially for bajajs?!!!..haha

[Gennosukes]

$4 give them lor, I'm the NO.1 carrot that fix my hella for $20. HUAT AH!!!!

 

hahaah bro u are not alone, ytd went to UM fix the rubber damper which bro mj got it for us.... e labour charge alone is already $6 while mj got it at $8....... so u know whose e blood sucker now ya?

 

Ard 6pm+ called UM and checked with them how much is the labour charge for changing a handle bar? Chris: $15 ... I was like ?! the handle bar only cost 28 from lab.

[Gennosukes]

u looking for olene or oren? or orleng? naah, i had a friend riding a gsr 400, not gsx400.

 

yoz bro got anything from lab juz now ?

[Gennosukes]

Alamak mj!!, u bad example..tsk tsk tsk..soon mr tp will lookout especially for bajajs?!!!..haha

 

:lol::lol:

[manikschumi]

Guys - are any of you using Acerbis Handguards? My bike is still without balancers. I do not feel my handle vibrating, but the rear view mirrors go bonkers around 70. Because of this I cannot see anything in the rear view mirror. (Left rear view mirror cannot see anything anyways, so rear view mirrors totally useless at 70). Btw, my mirrors are also not original.

 

I asked my 'non-Pulsarian' 'major off-roader' colleague and he suggested Acerbis Handguards - and mentioned that they will act as balancers and also protect the clutch/accelerator in case of an accident. Are any of you using these? Any idea how much do they cost? Do they look weird on the Pulsar?

 

Separately, when is the next coffee session? Owe MJ a huge bucket of coffee for his help last week.

[mjbs64]

Guys - are any of you using Acerbis Handguards? My bike is still without balancers. I do not feel my handle vibrating, but the rear view mirrors go bonkers around 70. Because of this I cannot see anything in the rear view mirror. (Left rear view mirror cannot see anything anyways, so rear view mirrors totally useless at 70). Btw, my mirrors are also not original.

 

I asked my 'non-Pulsarian' 'major off-roader' colleague and he suggested Acerbis Handguards - and mentioned that they will act as balancers and also protect the clutch/accelerator in case of an accident. Are any of you using these? Any idea how much do they cost? Do they look weird on the Pulsar?

 

Separately, when is the next coffee session? Owe MJ a huge bucket of coffee for his help last week.

 

Acerbis have many types ... and yes they are very good and EXPENSIVE. Our bro Kira have one model on his RIDE.

 

I think HKL selling the latest model Acerbis Dual Rod with LED around $240 plus installation.... click here for reference of the types and range price in USD.

 

http://www.acerbis.it/moto/index.php

 

http://www.motostrano.com/acduroha.html

 

 

and oh about the other day ... no problem lah bro hehehe .. btw during this wet weather just take note of any rain water intake in your tank ...

 

about any unofficial outing, no need to wait for us .. you also can post and invite us for meet up heheheh

 

 

 

happy and safe ride

Edited July 21, 2010 by mjbs64

[glzco]

okay.. abit off topic here for the moment.. everyone is sooo engrossed in their topic but i have to leave the topic for a moment.. in this case.. look below for details..

 

Event: Phantom + Pulsars Gathering

Location: Lau Pat Sat

Date: 23rd July 2010, Coming Friday

Time: 10pm

 

Schedule

1) Meet up Lau Pat Sat, 10pm

2) Supper/Dinner

3) Head off from Lau Pat Sat towards Woodlands Waterfront

 

The event was initiated by James (Phantom Rider) who saw us during our DIY session on Sunday. He was interested in our bikes and suggested a meetup this coming Friday. I had received his message on Tuesday but failed to post as it slipped my mind momentarily. In any case, is anyone interested?

 

1) glzco

2) o'ren? (PR?)

3) mjbs64? (sinnob intro? he was interested)

4) gaban? (touring rep?)

5) hvc? (black kareer rep?)

6)

7)

8)

 

I think its a good chance to mingle around people from other bike groups. do ask those who rarely access forums to join us.. i'll sms everyone about it.. even those who are online now.. just so everybody knows about it.. do help me by passing the message around.. we can ask the sym riders along too..

[HVC]

okay.. abit off topic here for the moment.. everyone is sooo engrossed in their topic but i have to leave the topic for a moment.. in this case.. look below for details..

 

Event: Phantom + Pulsars Gathering

Location: Lau Pat Sat

Date: 23rd July 2010, Coming Friday

Time: 10pm

 

Schedule

1) Meet up Lau Pat Sat, 10pm

2) Supper/Dinner

3) Head off from Lau Pat Sat towards Woodlands Waterfront

 

The event was initiated by James (Phantom Rider) who saw us during our DIY session on Sunday. He was interested in our bikes and suggested a meetup this coming Friday. I had received his message on Tuesday but failed to post as it slipped my mind momentarily. In any case, is anyone interested?

 

1) glzco

2) o'ren? (PR?)

3) mjbs64? (sinnob intro? he was interested)

4) gaban? (touring rep?)

5) hvc? (black kareer rep?)

6)

7)

8)

 

I think its a good chance to mingle around people from other bike groups. do ask those who rarely access forums to join us.. i'll sms everyone about it.. even those who are online now.. just so everybody knows about it.. do help me by passing the message around.. we can ask the sym riders along too..

 

it will be a nice meet-up but sadly im on night shift..sorry bro..btw glyzco..when are u doing ur LEDs with rabbit? im thinkin of next week..it will be an all super bright(iHope) WHITE for me to brighten up my BLACK KARErRrRrRrRrrrrr

[glzco]

it will be a nice meet-up but sadly im on night shift..sorry bro..btw glyzco..when are u doing ur LEDs with rabbit? im thinkin of next week..it will be an all super bright(iHope) WHITE for me to brighten up my BLACK KARErRrRrRrRrrrrr

 

bro.. nxt week when? update me yea.. i prob doin brakelights and other LEDs ard the bike.. why put white colour? not interested in black anymore??

[infarctive]

okay.. abit off topic here for the moment.. everyone is sooo engrossed in their topic but i have to leave the topic for a moment.. in this case.. look below for details..

 

Event: Phantom + Pulsars Gathering

Location: Lau Pat Sat

Date: 23rd July 2010, Coming Friday

Time: 10pm

 

Schedule

1) Meet up Lau Pat Sat, 10pm

2) Supper/Dinner

3) Head off from Lau Pat Sat towards Woodlands Waterfront

 

The event was initiated by James (Phantom Rider) who saw us during our DIY session on Sunday. He was interested in our bikes and suggested a meetup this coming Friday. I had received his message on Tuesday but failed to post as it slipped my mind momentarily. In any case, is anyone interested?

 

1) glzco

2) o'ren? (PR?)

3) mjbs64? (sinnob intro? he was interested)

4) gaban? (touring rep?)

5) hvc? (black kareer rep?)

6)

7)

8)

 

I think its a good chance to mingle around people from other bike groups. do ask those who rarely access forums to join us.. i'll sms everyone about it.. even those who are online now.. just so everybody knows about it.. do help me by passing the message around.. we can ask the sym riders along too..

 

Oh man....i wanna go man...hope I can get my bike on fri afternoon then can join you guys liao:cheeky:...