[Group] Singapore BAJAJ Team (SBT)

[ORen]

gd2. i dun care where u go, just go anywhere. as long as u take care of urself. have a safe and relaxing ride.

 

ride carefully sis

heard from the news that the haze in johor is even worst than here

so bad till some schools are closed

 

Will be careful, thanks for the heads up. Gaban will enjoy for sure, slowly but with a happy heart

 

Yay!! Finally got my bike after 3 weeks!

 

Weeeeee ! Congrats !! You must be thrilled, enjoy it :clap:

[harumonia]

Hm.. I never thought of testing this

But if the rear wheel turns when clutch is pulled, that's normal, no ?

When you say you can't rotate the wheel, you mean if the bike is on the main stand, and leaning on the back wheel, your front wheel does not free wheel if you play with it ?

 

If the clutch is pulled in fully the gears should be totally disconnected from the engine and the rear wheel shouldn't be receiving any power at all. Maybe that's why it's difficult to change to neutral. Might be a Pulsar thing...

 

Yep the bike is leaning back on the main stand and the front wheel does not rotate freely.

 

clutch cable need to loosen abit.. too tight i think.

 

maybe ur front caplier abit jam. that may cause ur brake pad and brake dics to wear out.

 

ya.. it;s think to go UM service liao.

might be also cause you crash the other time in the car park

so your front or brake might be out of alignment

 

Cool I'll go have it checked.

[harumonia]

2ml night will be going JB to pump and also to wash bike

anyone want to go?

 

Bleah I just washed bike today and still got more than half a tank of petrol. We should have kopi near Bukit Panjang tho.

[alvinyansg]

Bleah I just washed bike today and still got more than half a tank of petrol. We should have kopi near Bukit Panjang tho.

 

half tank still can go to top up if you want mah...

arrange kopi 2ml evening?

[alvinyansg]

2ml might be dropping by the electronic fair at expo to see if can find any good deals on mini video cam for bike use...

 

http://www.singaporeexpo.com.sg/index.php?option=com_events&task=event_details&id=513&Itemid=38

[Eliminator]

so eliminator what happen to the old parts?

 

Ohh all with HKL.Dont know what they gonna do with it.But you sure you still want the handguards? The left one quite rabak know.

[fircyber]

Gosh I wish I culd join all ur petrol pump outing, kopi shop chilling session but sadly I'm working permanent nite shift.

[mr.zhua]

****************

[manikschumi]

half tank still can go to top up if you want mah...

arrange kopi 2ml evening?

 

My conquistador() needs a wash - I'm in if anyone's going after 9. I rode to KL/Genting last week and the conquistador is really dirty. Needs a good wash.

 

I feel a weird loss of power as I pick up on almost all gears - its nothing severe but like it takes the bike a few milliseconds of no/little power after I change gear. Didnt have this problem until last week. Could it be the air filter? Carburettor? Maybe can get that cleaned out also if going to Ah Gua lane.

[alvinyansg]

My conquistador() needs a wash - I'm in if anyone's going after 9. I rode to KL/Genting last week and the conquistador is really dirty. Needs a good wash.

 

I feel a weird loss of power as I pick up on almost all gears - its nothing severe but like it takes the bike a few milliseconds of no/little power after I change gear. Didnt have this problem until last week. Could it be the air filter? Carburettor? Maybe can get that cleaned out also if going to Ah Gua lane.

 

rode there alone?

2ml i will be going in ard 11pm+

[manikschumi]

rode there alone?

2ml i will be going in ard 10-11pm

 

Yea - was feeling adventurous and bored Saturday morning so I decided to go to Malaysia via 2nd link. Was planning to go upto Machap only, but then decided to go to Melaka, but then decided to go all the way to KL. And then Genting. Stupid I know - but good fun. Lots of stops, lots of interesting people along the way.

 

10-11 p.m. works perfect for me.

[alvinyansg]

Yea - was feeling adventurous and bored Saturday morning so I decided to go to Malaysia via 2nd link. Was planning to go upto Machap only, but then decided to go to Melaka, but then decided to go all the way to KL. And then Genting. Stupid I know - but good fun. Lots of stops, lots of interesting people along the way.

 

10-11 p.m. works perfect for me.

 

 

ic

so just a ride to nowhere?

u went all the way up to genting?

how long u took to travel to KL?

[manikschumi]

ic

so just a ride to nowhere?

u went all the way up to genting?

how long u took to travel to KL?

 

Yea, KL got nothing so decided to loose some money in Genting. For KL, riding time was around 5 hours at an average speed of 100 km/hr, total time with stops 7 hours++

[alvinyansg]

teh/kopi session 2ml nite anyone?

then head to JB for petrol...

Edited October 21, 2010 by alvinyansg

[alvinyansg]

SERVICE & SPARE PARTS AT UM

 

Servicing

1) Standard Package Servicing ......................................$6.00

 

Engine & Spark Plug

02) 1pc cap camshaft + 2 pcs 'O' ring: ............................. $35.00

03) 1pc diaphragm: .................................................. ....$25+5 for workmanship fees

04) 1pc Magneto gasket (for starter motor) : ....................$6.00

05) Wash + clean carburettor : .......................................$18.00

06) Engine holding bolt (long) ........................................... $8

07) Change Engine oil 1L ........................................$10.00

08) Change FS Mobil 1 Engine oil 1.2L ........................................$26.40

09) Denso spark plug (copper) .................................................. ....$6.50

10) NGK spark plug (copper) ..............................................$5.50

 

 

Brake, Clutch, Choke & Throttle

01) 1pc Rear Brake Shoe: .............................................. $18

02) 5pcs clutch spring (for starter motor): ........................$2.50

03) 5pcs bush for clutch (for starter motor): .....................$2.50

04) Clutch cable .................................................. ..........$16.50

05) Brake pedal .................................................. .............. $25

06) Brake Fluid + labour .................................... $12

07) Throttle cable ..............................$17

08) New set of choke……………………………………… ……….. $18

09) Clutch gasket .................. .................. 1pc $4 (need 2 pcs)

10) Centrifugal gasket ................................ $1 a pc

11) Cultch plate Kit set .................... $78 ( if I'm not wrong)

 

 

 

Wheels, Tyres, Chain and Sprockets

01) Rubber cap for chain case: .......................................$1.00

02) Front & Rear sprocket + Chain : ................................. $75

03) Front sprocket only (without labor) .............................$12.50

04) Rear sprocket only (without labor) ..............................$25

05) Sprockets & Chain P200 (1 set) ........................ $136

06) IRC rear tyre (P200) .................................................$ 75

07) Battlax rear & front tyre P200 .............................$210

08) Seal puntured tyre ..................... $5

09) Rubber Coupling Damper ............ $10

10) Duro Tyre Rear (P180) ...........................$65

 

Electricals, Signals, Sensors and Horn

01) Signal light lens .................................................. .....$4.00

02) Whole signal light assembly (1 piece)............................$20.00

03) Bulb for fuel gauge/speedometer/tachometer (for ver 2) ..$2.00

04) Service starter motor assembly: ................................$15.00

05) Horn per pc .................................................. ................. $25

06) Head Light bulb ............................$8.50 [lookalike white light/P200] $7 [lookalike yellow]

07) Number Plate bulb ........................................ $2

08) Battery Dry Cell ...................$40.50

09) Temperature sensor .............. $12

 

 

Accessories

01) Crash bar .................................................. .............$30.00

02) Kit Grommet sidecover......................................... .......$2.50

03) Latest Givi Monorack for top box ..................................$70 (+$10 labor)

04) RH footrest.......................................... ...................... $36

05) LH footrest .................................................. .............. $32

06) Mirror per pcs .................................................. ............ $20

07) Handle bar .................................................. ................... $36

08) Pillon footrest per set .................................................. ..... $13

09) Shield muffler .................................................. ............... $28

10) Weld metal pc on side stand ............................................... $15

 

 

Fork, Main Stand, Side Stand and Exhaust

01) SVC the fork.............................................. ................ $40

02) Weld exhaust Pipe P180: .................................................. $15.00 [Depends on how bad it is]

03) Weld exhaust pipe P200 ......................................$22 [Depends on how bad it is]

04) Exhaust gasket ........................... $3.50

05) Top up fork oil ...................$4

06) Weld main stand wif extension + barckets ............. $30

07) Steering cone set($33) + Ball bearing 1 set of 39pcs (Top 19pcs below 20pcs)($4) + Labour($25)............................$62

[alvinyansg]

anyone looking for shocks?

 

p.s O'ren, its in black and gold...

 

http://www.singaporebikes.com/forums/showthread.php/304321-Wts-showa

[glzco]

bikevis bullet looks good.. the blinker seems to work much better too.. hmmm.. am thinking of getting both bullet and podmod....

[speedaddict]

Ohh all with HKL.Dont know what they gonna do with it.But you sure you still want the handguards? The left one quite rabak know.

 

haha rather than give them might as well give a buddy!

[arthur_chan]

But yet again .. the cool part to see is when you sprayed on rusty metal parts, you can here the 'seeezzz' sound and 'bubbles' effect and the rusty parts gone like magic hehehehe

 

really, would love to try out, so far i've tried, rust cannot be 100% removed from metal.

[arthur_chan]

interesting led lights

 

http://www.singaporebikes.com/forums/showthread.php/304674-lt-CMO-gt-High-Visibility-Bullet-LED-Lights?p=6745246#post6745246

 

interesting podmod, however i got 1qn, since it modulate the light, wont the bulb get spoilt faster? cos its like u on off it very often n bulbs have a blink rate of like 100k then it dies.

 

btw the led lights might be hard to fit in, cos it's not t10 n the socket might not fit.

[arthur_chan]

kk...

cos saw a guy from the DIY oiler thread that his tip was too close and the tip got pulled out and his tubing also got pulled out from the container

 

got to be careful of this mj, the way u put it close for brushing might end up "eaten" by the chain n get jammed in the spockets. i've personally tested it but lucky it was on the front so it wasn't "eaten".

[arthur_chan]

http://www.calamander.co.uk/images/scottoiler/hiw.gif

 

this diy? quite interesting technique.

[revhappy]

Hey guys, would the customs at woodlands be jammed in the morning going to MY at 7:30am ? I would think not because traffic is probably on the other direction jammed but not going to MY, right ?

 

I decided i'll go to Tanjung Sedili then head south to Sungai Rengit until Tanjung Pengelih. Going back to Sg I will take route 92 then route 3.

 

Weekends definitely no jam. Weekdays not so sure. Why not check out the traffic cameras on the One-Motoring website for the same time previous day. It will give you an idea.

[alvinyansg]

this diy? quite interesting technique.

 

if i am not wrong this diagram is the scott oiler diagram

[mjbs64]

really, would love to try out, so far i've tried, rust cannot be 100% removed from metal.

 

got to be careful of this mj, the way u put it close for brushing might end up "eaten" by the chain n get jammed in the spockets. i've personally tested it but lucky it was on the front so it wasn't "eaten".

 

this diy? quite interesting technique.

 

 

The pic is a Scottoiler v system auto oiler Price around $180+ @ motoworld http://www.scottoiler.com//uk/

 

yes thank you, noted on the diy tip.

 

m10 ... just drop by my place to test the product hehehehehe