Kawasaki KRR150 Riders

[Guest Valarie]

just come back form jb ... zzzz. . so tired,, go in wit frens.. go sin hock dere .. near ah gua lane.. i tink e name's ryte.. full service n change piston, piston ring .. **** my old piston so like burn out sia.. haha.. e mech say lucky come service faz if not piston jam lolx.. thank god not jam juz now went in at 3pm.. zzzzz..

 

If ur piston burn,its actually not a problem unless ur piston rings are out of shape or no longer hugging the piston. A burn pistons is normal. But a dented or holed piston should be replaced.

[kimmeng]

just come back form jb ... zzzz. . so tired,, go in wit frens.. go sin hock dere .. near ah gua lane.. i tink e name's ryte.. full service n change piston, piston ring .. **** my old piston so like burn out sia.. haha.. e mech say lucky come service faz if not piston jam lolx.. thank god not jam juz now went in at 3pm.. zzzzz..

 

bro how much you spent for full service?

and how long you took.

[kimmeng]

Kimeng, I had to attend work tomorrow but if u wish to go and see the motorshop that do painting, do tell me but I hope by then u are ready to spray your bike. Its quite far from custom so, dont come back Singapore empty hand!

 

yes i wanna paintwork and ready to do it. but the leaving of bike at jb make me quite hesitated to do it. how do i go back and how do i go and collect. somemore you say quite far from custom.

[SparkerS1]

yes i wanna paintwork and ready to do it. but the leaving of bike at jb make me quite hesitated to do it. how do i go back and how do i go and collect. somemore you say quite far from custom.

 

if u budget then go JB do lor, provided tat the shop got extra fairings to exchange wif u.

 

u can do in SG also, but the price u know lah, depends on u

[Vampire87]

afternoon hot... yeah.. that's why no rush... no people will squeeze with you as it's hot...

 

tried b4.. takes 10 min to clear custom BUT you will be sweating like mad as it's "d*** hot"... Anyway, better den to squeeze...

 

Come lah.. aiyo.. I can guide you to and from... 2 person nia.. can test trial 2 times.. no problem...

 

 

 

yeah... confirm jammed.. but if on wed night.. around 1/2 hour should clear but depends on heng suay also.. lolx..

 

 

 

yeah... sudden rain.. lucky I'm shopping at that time... den when come out,rain stops liaoz.. BUT my bike still kanna rain water while going home.. sianz man... just clean my bike today...

 

Come lah.. more people more fun and good lei..

 

no la... everyone also sometimes a road idiot de ma.. I also lei.. dun even know how to go Marina South.. go one whole big round around the island..

Aljunied-->>nicole highway-->>ECP-->>KPE-->>PIE-->>CTE-->>Nicole Highway-->>ECP-->>Marina south.. aiyo..

 

Btw, when did marina south close down one man.. I didn't even know.. upon reaching... It looks like Ghost TOWN to me... so scary.. the shops with all lights off and no people in sight... really scary when I reach...

 

Bro, pai seh. I think next time ba, suddenly got something on liao pai seh pai seh

[compfused]

just come back form jb ... zzzz. . so tired,, go in wit frens.. go sin hock dere .. near ah gua lane.. i tink e name's ryte.. full service n change piston, piston ring .. **** my old piston so like burn out sia.. haha.. e mech say lucky come service faz if not piston jam lolx.. thank god not jam juz now went in at 3pm.. zzzzz..

Common sense..Combustion takes place of coz got burnt marks..What you should take not of is if there are scratches on the side and if the rings are too loose..

 

If ur piston burn,its actually not a problem unless ur piston rings are out of shape or no longer hugging the piston. A burn pistons is normal. But a dented or holed piston should be replaced.

True..

[adesmond2]

Bro, pai seh. I think next time ba, suddenly got something on liao pai seh pai seh

 

haix.. ok lor.. will get kim meng to update here after he full service his bike..

 

But he sianz liaoz.. cause... I CONFIRM put him there alone.. will be going in VERY SOON...

 

if u budget then go JB do lor, provided tat the shop got extra fairings to exchange wif u.

 

u can do in SG also, but the price u know lah, depends on u

 

Yo, wan to come anot?? Yeah.. I'll ask around with him later to see if there's any ferring that can be exchange immediately... If not.. too bad for him again..

 

Common sense..Combustion takes place of coz got burnt marks..What you should take not of is if there are scratches on the side and if the rings are too loose..

 

True..

 

hmmm, too hard for me to understand but ok la...

[adesmond2]

Location: JB (Ah gua Lane)

Time/Date: 1200-1230/ 2nd July 2008(Wed)

Meet up Location: Hougang/Aljunied/AMK

For wat: Go to JB and familiar yourself with the road to custom and ah gua lane for future use... Those who wishes to do anything may stay, I'll be leaving back to Singapore by 4pm.. *to avoid jam and clean up myself before going out again...

 

Brief Plan as of now:

1200 meet up either one of the locations for short brief; change $$$ or go in change and etc...

1230 off to custom

1300 reach Malaysia

1330 Trial rounding to/from custom to Ah gua lane for each people leading(Max 5 people testing,petrol ex)

1400 Makan

1500 Bike shop opens, start to do anything you wan to do and etc,check pricing and etc..

1600 Outing ends, people who wishes to stay will stay, people who wishes to come back Singapore will leave with me...

 

*PM me your contact number and prefer meet up location, will contact you all again on wed morning.. If you can't meet up either of the location, please wake up abit early as I'll sms you and see where you know how to go and will meet you there...

 

*Min of 4 people will do. Add your name if you wishes to go, REMEMBER TO PM me your number.. thanks...

 

1)Desmond

2)LIM KIM MENG

 

 

last call last call.. no 1 huh? Den we will depart for malaysia at 1200.. for kim meng to get used to the environment there..

[kimmeng]

Malaysia Anyone Anyone?

[kimmeng]

TAH wanna go malaysia with us?

[shitson_rico]

If ur piston burn,its actually not a problem unless ur piston rings are out of shape or no longer hugging the piston. A burn pistons is normal. But a dented or holed piston should be replaced.

 

ya e pistone rings out of shape.. i got see e ting he show me n my fren..

 

bro how much you spent for full service?

and how long you took.

 

fer changing piston, piston ring is RM230 den full service RM90 .. altogether is RM320.. but i oni pay RM270 cuz not enuff cash, he say pay him back e next time round.. i reach e shop around 345, not mani ppl so around 1h30min liddat..

 

Common sense..Combustion takes place of coz got burnt marks..What you should take not of is if there are scratches on the side and if the rings are too loose..

 

-_-"

 

hmmm, too hard for me to understand but ok la...

 

me too .. but nvm..

[compfused]

ya e pistone rings out of shape.. i got see e ting he show me n my fren..

Maybe when he took it out he "bent" it? There's always a possibility..

 

fer changing piston, piston ring is RM230 den full service RM90 .. altogether is RM320.. but i oni pay RM270 cuz not enuff cash, he say pay him back e next time round.. i reach e shop around 345, not mani ppl so around 1h30min liddat..

Did the price of a piston and two rings suddenly increase or what?

[SparkerS1]

Did the price of a piston and two rings suddenly increse or what?

 

:lol: :lol:

[kito]

Did the price of a piston and two rings suddenly increase or what?

 

GUess they're practicing "GST" over there??

[compfused]

GUess they're practicing "GST" over there??

Where have you been hidin? Got mish me?

[kito]

Where have you been hidin? Got mish me?

 

Miss u totally..! I'm not hidin, just "shadowing" around.. Hey i'm going JB later at 11+ pm.. U Free?

[compfused]

Miss u totally..! I'm not hidin, just "shadowing" around.. Hey i'm going JB later at 11+ pm.. U Free?

Might be..May I ask whats the purpose for goin there?

[kito]

Might be..May I ask whats the purpose for goin there?

 

Yes u may.. I'm gonna do full servicing there.. Just wanna get e experience from their workmanship..

[compfused]

Yes u may.. I'm gonna do full servicing there.. Just wanna get e experience from their workmanship..

If I'm not too worned out from my daily activities..I'll try to make it..No promises tho..

[kito]

If I'm not too worned out from my daily activities..I'll try to make it..No promises tho..

 

Not a problem.. Will msg u in e evening to confirm.. Wow this thread is really moving fast..

[compfused]

Not a problem.. Will msg u in e evening to confirm.. Wow this thread is really moving fast..

Even faster than my ride..

[kito]

Even faster than my ride..

 

No wonder i'm left behind.. Where's smallboi. Really bz wif his ride huh. Guess he's out there now wandering around SG..

[Vampire87]

No wonder i'm left behind.. Where's smallboi. Really bz wif his ride huh. Guess he's out there now wandering around SG..

 

Confirm is haha

[kito]

Confirm is haha

 

Have to be.. He was like so active before.. And now.. He's e missing man.. Where's e love smallboi..! So how's ur ride..? E Yakuza game.. Amazing.. I played it for like 3 times..

[mojorossi]

If ur piston burn,its actually not a problem unless ur piston rings are out of shape or no longer hugging the piston. A burn pistons is normal. But a dented or holed piston should be replaced.

 

 

Wah lan! gi JB bo chio! hehe...buzzing by a FAZER almost full blast sounds like a mosquitoe isnt a good idea, coz dat stallion will bite back!