[Group] Club Yamaha XJR 400/1300 (Singapore)

[xjrredbull]

The 'tok tok' sound when you go very slow or pushing your bike, Bull is correct, caused by the sprocket/chain worn out.

 

I had this before, very malu when you pushed your bike at 2nd Link and this 'tok tok' sound came out from your bike.

 

Changed sprockets and chain, sound gone.

 

yup...but also must check & replace the front spocket's lock-nut too!

 

good day, Bogs

 

i think that 'tok' sound could come from

1. the spocket(wearing off of the lock nut).

 

go & have a look in by a mech Bogs! or if u have a spanner box size 8, you can remove the drive spocket cover & foot pegs to see it for yourself!

 

:C)

[btarroja]

good day, Bogs

 

i think that 'tok' sound could come from

1. the spocket(wearing off of the lock nut).

 

go & have a look in by a mech Bogs! or if u have a spanner box size 8, you can remove the drive spocket cover & foot pegs to see it for yourself!

 

 

Hi xrjredbull,

 

i just changed the chain and sprocket set but the "tok" sound still there. It happens only sometimes and not everytime and only when moving off from 1st gear. Could it be problem with clutch or gear box?

 

Thanks,

bogs

[xjrredbull]

Hi xrjredbull,

 

i just changed the chain and sprocket set but the "tok" sound still there. It happens only sometimes and not everytime and only when moving off from 1st gear. Could it be problem with clutch or gear box?

 

Thanks,

bogs

 

 

if gearbox, u couldnt even change your gears, let alone moving off or accelerations...

u can still clutch in & out rite, so it could be something else?

have u not ask ur mech to have a look in?

[btarroja]

if gearbox, u couldnt even change your gears, let alone moving off or accelerations...

u can still clutch in & out rite, so it could be something else?

have u not ask ur mech to have a look in?

 

i can still clutch in and out. also the "tok" sound will be gone after driving for a long time. then will come back after being parked for a long time.

 

anyway, i'll have my mechanic take a look at my clutch this saturday.

 

Thanks

[bernardk]

The TOK sound comes from your Wheel Hub Bushing. Which could prob be wear off. Is in the hub where your rear sprocket is. If you wanna confirm, park your bike and hold your sprocket and try to drive your sprocket like a steering wheel you will feel that its like loose loose.

[xjrredbull]

The TOK sound comes from your Wheel Hub Bushing. Which could prob be wear off. Is in the hub where your rear sprocket is. If you wanna confirm, park your bike and hold your sprocket and try to drive your sprocket like a steering wheel you will feel that its like loose loose.

 

hmmmmmmmmmm....

 

i can still clutch in and out. also the "tok" sound will be gone after driving for a long time. then will come back after being parked for a long time.

 

anyway, i'll have my mechanic take a look at my clutch this saturday.

 

Thanks

 

do comeback with a feedback ok?

[leec78]

Hello, can anybody help me with where i can find a copy of manual for my little xjr400 pocket rocket? I have looked high and low with no success. Sorry I am new to this Forum, so if this has already been posted if you could please point me in the right direction. Thank you.

[leec78]

Hello, can anybody help me with where i can find a copy of manual for my little xjr400 pocket rocket? I have looked high and low with no success. Sorry I am new to this Forum, so if this has already been posted if you could please point me in the right direction. Thank you.

[nash_1126]

Hello, can anybody help me with where i can find a copy of manual for my little xjr400 pocket rocket? I have looked high and low with no success. Sorry I am new to this Forum, so if this has already been posted if you could please point me in the right direction. Thank you.

 

All we ever found was a manual for XJR1300. Nothing for the 400 one so far.

[btarroja]

hmmmmmmmmmm....

 

 

 

do comeback with a feedback ok?

 

hi, so we checked and fixed everything outside and the tok sound is still there. confirmed that its inside the gearbox. most likely a bearing. will need to operate inside....

[btarroja]

Hi,

 

Has anybody had their engine mounts replace? Where and how much?

 

Thanks,

Bogs

[AwiE]

HI there...

 

Just got my FW XJR400.

 

FW 457. Any previous owner.

 

Felt that the engine is a bit on thr rough side compare to other XJR. What could be the problem?

 

Paging XJRBull!!!!!!!!

Can comment.....

[SPanrry]

HI there...

 

Just got my FW XJR400.

 

FW 457. Any previous owner.

 

Felt that the engine is a bit on thr rough side compare to other XJR. What could be the problem?

 

Paging XJRBull!!!!!!!!

Can comment.....

 

r u buy from aspoon?

 

what i know ur bike ........saw b4 in malaysia dairy in out singapore

[btarroja]

HI there...

 

Just got my FW XJR400.

 

FW 457. Any previous owner.

 

Felt that the engine is a bit on thr rough side compare to other XJR. What could be the problem?

 

Paging XJRBull!!!!!!!!

Can comment.....

 

have you tried changing engine oil, filter and spark plugs? Might as well check your air filter.

Edited April 26, 2010 by btarroja

[happy125]

HI there...

 

Just got my FW XJR400.

 

FW 457. Any previous owner.

 

Felt that the engine is a bit on thr rough side compare to other XJR. What could be the problem?

 

Paging XJRBull!!!!!!!!

Can comment.....

 

My XJR1300, I have always felt very rough.

Then I have "TOK" everytime I changed gear, up or down.

Went to 'famous' workshop at UBI, adviced was to change engine oil.

No change.

So tried Rosli workshop, changed some part at the clutch housing and also changed to this engine oil called Revtec.

Now everything very slick, and smooth.

 

Visit him and see whats his advice.

[BOWIE]

Hey, are any of you guys on msn? Add me up if you are at LCWL @ hotmail.com

[btarroja]

My XJR1300, I have always felt very rough.

Then I have "TOK" everytime I changed gear, up or down.

Went to 'famous' workshop at UBI, adviced was to change engine oil.

No change.

So tried Rosli workshop, changed some part at the clutch housing and also changed to this engine oil called Revtec.

Now everything very slick, and smooth.

 

Visit him and see whats his advice.

 

Hi, Can you share where Rosli Shop is?

 

Thanks

[happy125]

Hi, Can you share where Rosli Shop is?

 

Thanks

 

Its at Kaki Bukit AutoBay.

Cant remember the unit no, at level 2.

Phone no, 67478202.

[onemanarmy]

HI there...

 

Just got my FW XJR400.

 

FW 457. Any previous owner.

 

Felt that the engine is a bit on thr rough side compare to other XJR. What could be the problem?

 

Paging XJRBull!!!!!!!!

Can comment.....

 

Saw an XJR at Lornie Road yesterday plate no. FW 741 if I'm not mistaken.

 

Thought it was you. Lucky didnt approach the guy to ask.

[AwiE]

r u buy from aspoon?

 

what i know ur bike ........saw b4 in malaysia dairy in out singapore

 

Yiep...got it from asphoon at $3.8k OTR. Wonder if it's expensive.

 

Salesman told me been there for abt 2 months.

[AwiE]

Saw an XJR at Lornie Road yesterday plate no. FW 741 if I'm not mistaken.

 

Thought it was you. Lucky didnt approach the guy to ask.

 

Haha...me too go to work using Lornie Road from Tampines.

[AwiE]

My XJR1300, I have always felt very rough.

Then I have "TOK" everytime I changed gear, up or down.

Went to 'famous' workshop at UBI, adviced was to change engine oil.

No change.

So tried Rosli workshop, changed some part at the clutch housing and also changed to this engine oil called Revtec.

Now everything very slick, and smooth.

 

Visit him and see whats his advice.

 

For me it when neutral, engine tok tok quite loud. When cold start not so bad.

 

Maybe drop by Ah Chong to enquire.

[SPanrry]

Yiep...got it from asphoon at $3.8k OTR. Wonder if it's expensive.

 

Salesman told me been there for abt 2 months.

 

u get this bike cheep ........i ask sales man last 2 month coat me 5k + insurans

[onemanarmy]

$3.8k for FW plate is relatively cheap.

 

I got mine, an FV plate one at $3.5k last year.

 

Btw AwiE, don't mind me asking. But how does your XJR paintwork looks like?

[xjrredbull]

$3.8k for FW plate is relatively cheap.

 

I got mine, an FV plate one at $3.5k last year.

 

Btw AwiE, don't mind me asking. But how does your XJR paintwork looks like?

yes, Awie, pls post your pix eh?

 

u get this bike cheep ........i ask sales man last 2 month coat me 5k + insurans

For me it when neutral, engine tok tok quite loud. When cold start not so bad.

 

Maybe drop by Ah Chong to enquire.

hmmm...Ah Chong which Ah Chong?

 

Its at Kaki Bukit AutoBay.

Cant remember the unit no, at level 2.

Phone no, 67478202.

heared about this mech from Abg Yusof that he is good.

 

Hi, Can you share where Rosli Shop is?

 

Thanks

 

HI there...

 

Just got my FW XJR400.

 

FW 457. Any previous owner.

 

Felt that the engine is a bit on thr rough side compare to other XJR. What could be the problem?

 

Paging XJRBull!!!!!!!!

Can comment.....

 

alamak, bro...

left a pm & my contact number & then, u disappear eh?

pm me your number...

u say we old fren fren....

 

Hi,

 

Has anybody had their engine mounts replace? Where and how much?

 

Thanks,

Bogs

 

hmmm..nope on mine.