[Discussions] Gear Selections

[comcare]

Okay.

 

Is your bike brand new too, Lihsheng? Hopefully this won't damage the transmission system.

[lihsheng]

Originally posted by comcare@Oct 23 2006, 06:52 AM

Okay.

 

Is your bike brand new too, Lihsheng? Hopefully this won't damage the transmission system.

mines 2nd hand.. how come u buy 1st hand? i tot now everyone gets spark? how much u bought it?

[comcare]

I love 125z, so that's why I got 1st hand bike. I bought RM7000.

 

Spark? Is that a new Yamaha model? I should go check it out.

[THJ]

princessfiz 3rd gear drag too much

[jap_muska]

Originally posted by comcare@Oct 23 2006, 12:33 PM

I love 125z, so that's why I got 1st hand bike. I bought RM7000.

 

Spark? Is that a new Yamaha model? I should go check it out.

In m'sia its known as LC135

[y0s_bikey]

yamaha bike freq have this prob...

last last time my tzm first hand always have this prob as well

mine is it will engage into nothing or it will suddenly slip down gear...

it could be ur engine oil la try from the cheapest first if still the case den could be something more serious...

[comcare]

Originally posted by jap_muska@Oct 25 2006, 01:01 PM

In m'sia its known as LC135

Oh the 135LC. The dealer got introduce to me but I dun wan.

 

Coz many ppl say the 2 stroke dynasty will end soon so I wan to try it out. Surprisingly, it makan a lot of fuel.

 

135LC I see not bad the design, but not as good as 125z (in my opinion).

[comcare]

Originally posted by y0s_bikey@Oct 25 2006, 01:33 PM

yamaha bike freq have this prob...

last last time my tzm first hand always have this prob as well

mine is it will engage into nothing or it will suddenly slip down gear...

it could be ur engine oil la try from the cheapest first if still the case den could be something more serious...

Oh so it's normal for Yamaha bikes to have this kinda problem. I thought mine only got problem.

 

Because of the gear slip, the riding don't feel that smooth - a bit dissapointed.

 

So your TZM is the engine oil problem? How long did this problem last for you? Did it still slip after you change your engine oil?

 

Very annoying when come out from junction coz the gear sometimes won't connect and I loose speed. Sometimes the gear won't engage and I'm stuck at beside the road and lost track of which gear I'm in. Very paiseh like that.

 

Wah, seems like you change ur bike almost every year. Why ah?

[y0s_bikey]

haha nothing to do backside itchy see 1 bike like 1 bike lo...

anyway im not too sure whether is it the same prob anot...

but last time my 2 stroker i use ROCKOIL gear oil which was the best for my TZM la

if u wan mayb u can gif it a try see whether is it good anot?

another thing check ur cluth cable see if its too loose its its too loose and its fails to engage and dis engage properly will cause this prob as well...

 

another way if u cant engage into 1st gear when moving off correct? u can actually release abit of the cluth feel roughly dat ur biting point den u try kick the gear again it should do the job

 

jus some experience from my previous bikes if some infos have been given wrongly pls correct me we are all here to learn and share,..

cheers

[comcare]

I just had that problem just now. I was slowing down at a junction, and shift down to 1st gear. The thing is, I thought it already engaged into 1st gear but it's not. It's kinda like half way into 1st gear.

 

I see no car, I hit the gas and release the clutch. And guess what, I turned into a rodeo. The bike run, then stop, then run, then stop quite violently. I'm like "WHAT THE ****!? WHAT THE HELL IS GOING ON?!".

 

I was pretty shocked. Did that ever happened to you?

[sICkbOi-dOt-cOm]

The Way U Explain It Very Funni... Hahaha...

[comcare]

Originally posted by y0s_bikey+Oct 26 2006, 01:09 PM-->

QUOTE (y0s_bikey @ Oct 26 2006, 01:09 PM)

haha nothing to do backside itchy see 1 bike like 1 bike lo... anyway im not too sure whether is it the same prob anot... but last time my 2 stroker i use ROCKOIL gear oil which was the best for my TZM la if u wan mayb u can gif it a try see whether is it good anot? another thing check ur cluth cable see if its too loose its its too loose and its fails to engage and dis engage properly will cause this prob as well...   another way if u cant engage into 1st gear when moving off correct? u can actually release abit of the cluth feel roughly dat ur biting point den u try kick the gear again it should do the job   jus some experience from my previous bikes if some infos have been given wrongly pls correct me we are all here to learn and share,.. cheers [/b]

[y0s_bikey]

no prob bro jus happened dat i ever encountered the same prob ah... so i know how to rectrify the prob... cos last time newbie dat time duno how to solve the prob ah

den green light cannot engage into gear den the cars behind all horn like nobody can hear their horn... who duno is green light but cannot move off oso lan lan...

[fabianau]

hi guys, x1 riders out there, what is the max speed your gear 1 can go? i tried mine is only 20km/hr. is it normal? or prob with my engine?

 

i jus service my carb leh. still the same...

[fesa7044]

no prob bro jus happened dat i ever encountered the same prob ah... so i know how to rectrify the prob... cos last time newbie dat time duno how to solve the prob ah

den green light cannot engage into gear den the cars behind all horn like nobody can hear their horn... who duno is green light but cannot move off oso lan lan...

 

 

sorri to hijack dis thread??

doing some testing!

[img]http://i919.photobucket.com/albums/ad37/fesa7044/Ducati_desmodromic_cam_animation1.gif[/img]