SBF X9 Cafe 2009 - Amalfi/Evo

[kennyseaw]

wootS~ thanks for the reply, full of details =D

i'm nt really sure if that is an evo, i can't tell the diff, i only know it's a X9.

the bike looks quite cui at the moment, but the sales guy say he will do until good good, den sell to me... yah...

 

Look good or not, for me not so important, most important is the inside things.

 

A going 7 yrs bike with too good looking, i worry more... Btw, just fyi, X9 180cc cost about $800 - $1800, x9 200 cost about $2000 - $3500 depend to conditions.. To different the X9 180 or 200 can be easy done by just looking at the mirror, hard to explain on the net, i can show you my X9 and you will know the different

[Maka]

okay, i called to check, it's a FU plate, 180cc @ $1600. is it good?

does it need tuti oil or smt like that?

[fatmeat]

U mean suddenly no brake.... but did it respond back after you pump the lever?

 

This happen to me before few yrs ago and i did bring it up to agent, at the end, no way to resolve. Normally it give way when it is too hot, but good things is only 1 side will happen, the other will still be working.

 

 

pump the lever?? The uncle never do anything to my bike at all. Think one day i bring my bike to your shop let you assess.

[kennyseaw]

okay, i called to check, it's a FU plate, 180cc @ $1600. is it good?

does it need tuti oil or smt like that?

 

1600 price is quite ok but it will depend to bike condition >

 

Normal problem >

 

1. engine mounting est. from $140 to $180

2. Steering cone est. from $100 to $140

3. Coolant pump est. from $170 to $220

4. Magneto coil est from $160 to $200

5. Magneto est from $160 to $200

6. Dry cell batt. from $55 to $85

7. Michelin Gold Tyres front and rear est. from $180 to $220

8. Brake pads est from $25 to $45

[kennyseaw]

pump the lever?? The uncle never do anything to my bike at all. Think one day i bring my bike to your shop let you assess.

 

u joining the scooter outing?

[kennyseaw]

X9 Riders,

Please be more careful, we are been target again like 2 - 3 Yrs ago >.>

 

http://www.singaporebikes.com/forums/showthread.php?t=227405

[joecarter]

Anybody can teach me how to open up the compartment to the battery? I want to pull out the wire cos gg on long lve. Urgent! Thx.

[kennyseaw]

Anybody can teach me how to open up the compartment to the battery? I want to pull out the wire cos gg on long lve. Urgent! Thx.

 

Open ur seat >

Open the 2 screw near the seat lock >

Push up the rear batt cover >

Done

[joecarter]

Open ur seat >

Open the 2 screw near the seat lock >

Push up the rear batt cover >

Done

 

Thx so much. I've taken it out. Hopefully it wont die from me when i come back. Cheers!

[kennyseaw]

Thx so much. I've taken it out. Hopefully it wont die from me when i come back. Cheers!

 

u should have send for ful charging before you left .

[AdsLb0]

u should have send for ful charging before you left .

 

Hi Kenny,

 

do u have tachnometer with voltage meter tats is waterproof for my X8 ?

[deschankz]

Hi all.

 

I just passed my 2B earlier this week and am thinking of getting an X9 Evo. Have always loved the bike and hence need some advice.

 

 

1) Where would I be able to find X9 bikes which are in relatively good condition and reasonably priced?

 

2) What are the key points to check when it comes to viewing or test riding the bike?

 

3) Seems like a lot of maintanence has to be done to prevent the X9 from trouble. Is it a lot of hassle to upkeep?

 

4) Lastly, how does one go about buying a 2nd-hand bike? Details... Like insurance, transfer fee, admin fee.

 

Thanks in advance to any guys out there who can give some great advice!

 

Cheers,

Desmond

[kennyseaw]

Hi Kenny,

 

do u have tachnometer with voltage meter tats is waterproof for my X8 ?

 

I know that there's a brand call KOSO from taiwan, very good water prove. If you interested, i can try to e-mails them for details. But should be tachnometer alone

[kennyseaw]

Hi all.

 

I just passed my 2B earlier this week and am thinking of getting an X9 Evo. Have always loved the bike and hence need some advice.

 

 

1) Where would I be able to find X9 bikes which are in relatively good condition and reasonably priced?

 

2) What are the key points to check when it comes to viewing or test riding the bike?

 

3) Seems like a lot of maintanence has to be done to prevent the X9 from trouble. Is it a lot of hassle to upkeep?

 

4) Lastly, how does one go about buying a 2nd-hand bike? Details... Like insurance, transfer fee, admin fee.

 

Thanks in advance to any guys out there who can give some great advice!

 

Cheers,

Desmond

 

Hi Desmond, congrats.

 

1. very good and new conditions may cost you more $$$, i got a friend who's willing to sell his since he seldom ride. Condition 9/10, if interested, you can call me at 96238875, i can help you arrange.

 

2. Normal problem = Engine mounting, Steering cone, water pump, magnet, magnet coil, etc....

 

3. good ans well maintenance will min. the problem

 

4. you can do it ur own or pass it to any shop u know to do it for you. Ofcourse if you pass it to shop, it will be more easy lor

 

Hope you can get a dream scooter soon, cheers

[horizoner]

Hi guys!!!

 

 

wow ... new thread ....

[kennyseaw]

Hi guys!!!

 

 

wow ... new thread ....

 

wat;s new here?

[Sianz_OwL84]

Hi guys ,

 

Had just bought a 2nd hand X9 recently and so i would like to ask for any advice on the maintaining the bike and what r the things that i should take note of?

[horizoner]

wat;s new here?

 

the x9 cafe is moved to a new thread ...

 

heard that u r driving an Evo now?

[Taklehtido]

Hi guys ,

 

Had just bought a 2nd hand X9 recently and so i would like to ask for any advice on the maintaining the bike and what r the things that i should take note of?

 

Bro, reading this thread's earlier post would be good ... ...

[kennyseaw]

Hi guys ,

 

Had just bought a 2nd hand X9 recently and so i would like to ask for any advice on the maintaining the bike and what r the things that i should take note of?

 

first few things to check >

 

1. engine mounting

2. Steering cone

3. coolant pump

4. tyres

5. brake pads

6. batt

 

cheers

[kennyseaw]

the x9 cafe is moved to a new thread ...

 

heard that u r driving an Evo now?

 

my x9 is back in action le, hope you can join us on outing, long time no see. even you drive there also no problem

[Sâundless]

my x9 is back in action le, hope you can join us on outing, long time no see. even you drive there also no problem

 

Wow. The legend nemo have re-surface again.

[horizoner]

my x9 is back in action le, hope you can join us on outing, long time no see. even you drive there also no problem

 

that's good Boss!!! a waste to lay it up ...

 

like what soundless say, it's LEGENDARY ... haha

[desmondband]

Hi guys, recently i realise that my panel back light had blown.. think just 1 LED ba.. u guys know is the blub changeable??

 

is it using T-10 or what other kind of blub??

 

and also i want to change my rear and front light to a more brighter one.. can someone help in providing the details?? where can i buy and diy??

[syedshameer]

any cool paint jobs for x9?