SBF Tmax Cafe

[bigcow]

If i never remember wrongly that you are not riding tmax liao please keep the comment to yourself thanks

 

He used to have all these and thats the fact. I don't see anything wrong with his post.

Chilli post that he ever installed all these is a good thing. So that those who wish to know more before installing, can look for him.

U not happy can go get all the malossi stuffs also ma. Why wan to create a commotion in here?

[anric79]

around 80km/hr , seems like a few of us our last bike was a fazer, mine was FZ1

 

mine was a Fz6s2 with fairing de. why i change cos i press clutch dao very tired hand. how about u katana777, why u change to Tmax?

 

I realize no fairing or slider to fix , the only thing i found out is yamaha europe website got this protective sticker thing , is tat the only choice ? haiz Protective sticker

[sleepoo]

4krpm equal to how many kmph in tmax meter???? manual book say run in for the first 600km run at 4krpm .

 

600 miles.... not km.... hahhah its tough.... i cleared my run in within 2 weeks...=) worst riding experience doing the run in man....

next 400 miles is 5000rpm, close to whacking already... 6000rpm can go about 120 liao...

[Max out]

He used to have all these and thats the fact. I don't see anything wrong with his post.

Chilli post that he ever installed all these is a good thing. So that those who wish to know more before installing, can look for him.

U not happy can go get all the malossi stuffs also ma. Why wan to create a commotion in here?

 

I not starting anything since i post wrongly and say wrong thing I say sorry and I will not post anymore. Are you happy I not rich like him sorry very sorry. Why dun you ask him he promise to sell mr the lever but sell other people never mind Liao I think I in the wrong too sorry I will not post anymore

[katana777]

mine was a Fz6s2 with fairing de. why i change cos i press clutch dao very tired hand. how about u katana777, why u change to Tmax?

 

I realize no fairing or slider to fix , the only thing i found out is yamaha europe website got this protective sticker thing , is tat the only choice ? haiz Protective sticker

i change to tmax cos actually wanna get a versys but at tat time it was out of stock, so no bike to change n get myself a tmax, but now aiming for the new honda crossrunner

[swoosh]

There's a Tmax 10' currently selling at Loois Motor. Low mileage and well taken care of by the previous owner.... Asking $17k otr....

 

Was it blue in colour? Owner put there under consignment to sell, was told the mileage "should be" over 20k miles....

[dddesmonddd]

just to ask, what are the things i need to change if i want the pick up to be faster, other den belt, roller... any internal parts to change? i know ther is this Jcosta roller something...

 

 

any veterans care to share? i wanna find out more bout this j costa roller thing!

[anric79]

i just order a kilometer meter through mr lee from yamaha.It will take 3 weeks to reach our shore. Mr lee order from UK and cost me sing dollar $625. As i hate to read meter in miles cos dont get use to it so those tat cant get use to it can purchase from mr lee too.

[sp2]

Rizoma Riser kit and handle bar for TMAX 08 and above!

 

Price lowered to $540 (paid $680 for it)... view at A.C.Motor... 50 serangoon north ave 4 #01-28 first centre s555856... my loss your gain..

 

 

Pictures for illustration only... its a brand new set (Sealed) you will be getting!!

[sp2]

page 100 is on e way!!!

[anric79]

where did u guys install ur IU unit ? left or centre or right? and which part ?

[ric78]

where did u guys install ur IU unit ? left or centre or right? and which part ?

 

Mine in the right pocket

[katana777]

where did u guys install ur IU unit ? left or centre or right? and which part ?

mine also right pocket

[anric79]

would someone kindly post a IU picture mount on Tmax , i dont noe where to install is the best nice location?

[leo_rider]

would someone kindly post a IU picture mount on Tmax , i dont noe where to install is the best nice location?

 

most of us place it in the right pocket. there no need for any bracket.

[anric79]

bro it will be nice to show me　ｐｉｃｔｕｒｅ why rite no need bracket , den use double side to stick the IU　ｍｅｈ？　　

[ric78]

bro it will be nice to show me　ｐｉｃｔｕｒｅ why rite no need bracket , den use double side to stick the IU　ｍｅｈ？　　

I just leave it inside the pocket w/o any bracket or double sided tape to hold it in position. This is for the convenience of taking it out if the carpark scanner cant detect it. But til now there's no problem with it

[anric79]

http://i109.photobucket.com/albums/n62/anric79/iu2.jpg

 

http://i109.photobucket.com/albums/n62/anric79/iu1.jpg

[anric79]

very ugly lehhhh , mount dao so high up , mr lee done to a t max buyer today and he take pic show me.. so where shall i install lahhh

[anric79]

Mine in the right pocket

 

mine also right pocket

 

most of us place it in the right pocket. there no need for any bracket.

 

 

Did u all mean u all put inside the glove compartment at right hand side? and y cant put at left hand side of the glove ne ???? and did u all screw hole to fix secure or just double sided tape. and if place inside , can it really detect ERP gantry ???? pls advise me ... thks.

[leo_rider]

Did u all mean u all put inside the glove compartment at right hand side? and y cant put at left hand side of the glove ne ???? and did u all screw hole to fix secure or just double sided tape. and if place inside , can it really detect ERP gantry ???? pls advise me ... thks.

 

yes, right glove compartment. with NOTHING to secure, as per what Ric78 says, for easier removing the iu out to allow the carpark sensor to detect(if there's a need to)

 

it's place on the right as most if not all the carpark IU detector r on the right. it's not logical to place on the left. but, u can still do so if u find left glove compartment easier for u.

 

so far, I went thru ERP countless times and nothing happens.

[mmmitchhh]

yup i put it in my right side compartment too. Just slot the whole IU inside. So far so good.

 

anric79, probably you wanna try reading the entire Tmax post from page 1 onwards. Definitely ans alot of burning qns wandering in your mind and of cause be poisoned at the same time hee hee.

[anric79]

yes, right glove compartment. with NOTHING to secure, as per what Ric78 says, for easier removing the iu out to allow the carpark sensor to detect(if there's a need to)

 

it's place on the right as most if not all the carpark IU detector r on the right. it's not logical to place on the left. but, u can still do so if u find left glove compartment easier for u.

 

so far, I went thru ERP countless times and nothing happens.

 

yup i put it in my right side compartment too. Just slot the whole IU inside. So far so good.

 

anric79, probably you wanna try reading the entire Tmax post from page 1 onwards. Definitely ans alot of burning qns wandering in your mind and of cause be poisoned at the same time hee hee.

 

Thks for all of your valuable advice.

[Qranc21]

I fix my ERP like what u shown in the above pic, but I place it right as most carpark scanning are on the right too. But the mounting shown in the pic too high, I went to Seng kwang twice just to adjust the angle lower & nearer to the handle so it won't look awkward & of course I wrap it with carbon black to match with my bar. Advantage I got one more glove compartment space one for drink/ wet cloth another for wallet, home key charging phone etc, when wearing short pants for nearby can place there! Very convience but must remember to take..

 

Mounting outside also can see the money of amount whether it deduct successfully & most importantly sometime forgot or unexpected ERP operating hour never place cash card in advance... I just take it form my waist pouch & insert while riding..

[anric79]

"Mounting outside also can see the money of amount whether it deduct successfully & most importantly sometime forgot or unexpected ERP operating hour never place cash card in advance... I just take it form my waist pouch & insert while riding.. "

 

 

your this quote really make sense, i able to see whether it deduct erp anot and can insert cashcard in quickly if i had forgtotten. i will ask them to bend lower to handle bar then, thks for u advice again