-=BabyBlade=-(CBR)

[honam24]

Originally posted by Aalex82@Nov 6 2006, 02:47 PM

1st time go touring of cos feel very tired..

we even encounter something "dirty" during the stay overnite..

but cos too tired liao, dun even care and juz slp..

after that, my gf and i addicted to touring liao..

love the feeling to reach a far place after enduring the hot sun, raining, backside pain.. blab blab blab..

Need a lot of water parade ..

 

[Aalex82]

Originally posted by honam24@Nov 6 2006, 04:49 PM

Need a lot of water parade ..

 

not alot lah..

wait hav to keep going to toilet..

abt one can of drink when stop at the petrol kiosk..

[Blueblood]

Originally posted by honam24@Nov 6 2006, 04:49 PM

Need a lot of water parade ..

 

need to warm up ur body also

[Blueblood]

Originally posted by jeriwajac@Nov 5 2006, 01:03 AM

wah lau.....

i ride hard and fast but safely ok...

how to ride hard n fast but yet safe?

[darren_soh86]

Originally posted by myusha@Nov 5 2006, 09:16 PM

what ever bulbs you wanna use, please check the watts and voltage first.

Headlight (high/low beam) 12v 60/35w (H4) should be the original 'current'.

12V 60/35W?

 

or izzit 12V 60/55W saib by dao jeff?

 

i check out the Haynes manual for our ride.. it says 12V 60/35W for Jap Spec.. 12V 60/55W for UK Spec.. how the heck we determine which spec is our ride?

 

btw when i got my bike last week.. it was Stanley 12V 60/55W fitted on..

 

i am thinking to change.. but than again i m worried bout the lighting system melting down due to over-powered bulbs.. so betta to confirm...

 

ani idea?

[honam24]

Originally posted by Aalex82@Nov 6 2006, 07:14 PM

not alot lah..

wait hav to keep going to toilet..

abt one can of drink when stop at the petrol kiosk..

ya lo, i always drink one bottle when stop at petrol kiosk.

[Lass]

Originally posted by wantonmee07@Nov 6 2006, 12:01 AM

yah tats mine...

e one fr i-motoring? cos e no. plate looks v familiar hehe

[honam24]

Originally posted by blueblood@Nov 6 2006, 07:54 PM

need to warm up ur body also

Do 5 BX huh!!!

 

[MaTrIx87]

guys stupid q to ask but about an average of how many kms does a fully syn 4t last? n a semi syn? its 5000km for full n 4000km for semi isit?

[daojeff]

12V 60/35W?

 

or izzit 12V 60/55W saib by dao jeff?

 

i check out the Haynes manual for our ride.. it says 12V 60/35W for Jap Spec.. 12V 60/55W for UK Spec.. how the heck we determine which spec is our ride?

 

btw when i got my bike last week.. it was Stanley 12V 60/55W fitted on..

 

i am thinking to change.. but than again i m worried bout the lighting system melting down due to over-powered bulbs.. so betta to confirm...

 

ani idea?

 

erm... it should be safe using 12v60/55w because i have been using it for months and still working fine.

 

guys stupid q to ask but about an average of how many kms does a fully syn 4t last? n a semi syn? its 5000km for full n 4000km for semi isit?

 

erm... i think u use the word "last" like abit not suitable.

it is recommand to change your engine oil every 5000km for fully syn and 3000k for semi syn.

 

if you dun wan to change also can 1 mah... engine oil will not be eaten up by our bike. but i do not know what will happen if you do not change your engine oil for very long lar.. hahaha

[wantonmee07]

Originally posted by jeriwajac@Nov 6 2006, 02:06 PM

she always last person 1...

start off with her, in 5 mins u can barely see her in ur rear view mirror.....

 

issit? i remember the first time met her... she is the fast n the furious one... first one. followed by u, derek then lao fu zi n me side by side.

 

remember bo...? i think tats the reason why u cant see her in your side mirror. Cos u gotta OPEN throttle n look far ahead.

[wantonmee07]

Originally posted by Lass@Nov 6 2006, 08:52 PM

e one fr i-motoring? cos e no. plate looks v familiar hehe

yeah at i-motoring. Why issit tat the plate number is familiar?

 

[rhema83]

Originally posted by darren_soh86@Nov 6 2006, 08:21 PM

12V 60/35W?

 

or izzit 12V 60/55W saib by dao jeff?

 

i check out the Haynes manual for our ride.. it says 12V 60/35W for Jap Spec.. 12V 60/55W for UK Spec.. how the heck we determine which spec is our ride?

 

btw when i got my bike last week.. it was Stanley 12V 60/55W fitted on..

 

i am thinking to change.. but than again i m worried bout the lighting system melting down due to over-powered bulbs.. so betta to confirm...

 

ani idea?

Our bikes are JDM aka Jap spec. The stock wattage is 12V 60/35W. If you want to use 12V 60/55W, you need to modify the lighting wiring so that the headlight switch controls a relay (the actual current should not pass through the switch or it will melt it). Also, it is best to get the wiring checked because the stock charging system does not produce enough power to charge the battery and run 2 60/55W bulbs at the same time.

 

I used Philips Silvervision and one bulb died after barely 2 months. So disappointing. I am going to try Sylvania Silverstars (which I am using on my car now).

[jeriwajac]

Originally posted by wantonmee07@Nov 6 2006, 11:19 PM

issit? i remember the first time met her... she is the fast n the furious one... first one. followed by u, derek then lao fu zi n me side by side.

 

remember bo...? i think tats the reason why u cant see her in your side mirror. Cos u gotta OPEN throttle n look far ahead.

wah! sure or not.......

only time i remember ride fast was when my bike just overhaul and i running-in...

 

:cheeky:

[Lass]

Originally posted by wantonmee07@Nov 6 2006, 11:23 PM

yeah at i-motoring. Why issit tat the plate number is familiar?

 

cos i saw at e bike shop n the others posted ur no plate here so i tot it looks familiar loh. besides the bike u posted in here b4 mah hehe so i suspected was ur bike. u come out fr who? norman or one of e other sales guy?

[Jayz_sg]

Hi guys,

 

I want to change my pillion foot rest to those normal 1s, As in the 1 where it cannot be fold back itside 1. Any 1 has any idea if other bikes footrest can be fitted with any mod. I saw tyga selling it, but that is for their fairing set only, i have emailed them on this and they cannot confirm that it will fit with stock fairing. I dun 1 2 spend $100+ and then cannot use.

 

 

http://tyga-performance.com/tyganc29/rearr...08e7bd5f2865edbFoot Rest

[myusha]

if any original foot rest will do, then u can try the scrap yard, see any babyblade waiting to be scrape, then u can buy them for a few bucks

[wantonmee07]

Originally posted by jeriwajac@Nov 7 2006, 12:07 PM

wah! sure or not.......

only time i remember ride fast was when my bike just overhaul and i running-in...

 

:cheeky:

running in ride fast? hard run in ar??

[wantonmee07]

Originally posted by Lass@Nov 7 2006, 02:03 PM

cos i saw at e bike shop n the others posted ur no plate here so i tot it looks familiar loh. besides the bike u posted in here b4 mah hehe so i suspected was ur bike. u come out fr who? norman or one of e other sales guy?

thru norman. Any info to share??

[Jayz_sg]

btw any1 know if u take out the header can reuse the gasket? n how many cans of spray do i need for the header if i want spray 3 coats.

[darren_soh86]

Originally posted by Jayz_sg@Nov 7 2006, 09:32 PM

btw any1 know if u take out the header can reuse the gasket? n how many cans of spray do i need for the header if i want spray 3 coats.

nop.. bro its highly advised to replaced them with new gaskets.. to prevent exhaust leaks.. i m interested to do the header job too.. its rusty.. damn eye sore..

 

but i was wondering if we use high temp paint.. are there high temp primer paint available?

[anonymouser]

Bros of Babyblade. I've got some queries i wanna clear. I heard there is 2 kinds of babyblades which are hurricane and RR model is it? What is their differences in performance? Im 20 and I wanna trade in my bike with CBR4 but the insurance i heard very expensive. How much is on the road pricing? bike+rd tax+insucrance..etc?

[wantonmee07]

Originally posted by Jayz_sg@Nov 7 2006, 09:32 PM

btw any1 know if u take out the header can reuse the gasket? n how many cans of spray do i need for the header if i want spray 3 coats.

i'd advise not to spray to many coatings. maybe 2 thin coating will do the job. too many coating might cause the paint to peel/chip off easily.

[wantonmee07]

Originally posted by nas_1986@Nov 7 2006, 10:24 PM

Bros of Babyblade. I've got some queries i wanna clear. I heard there is 2 kinds of babyblades which are hurricane and RR model is it? What is their differences in performance? Im 20 and I wanna trade in my bike with CBR4 but the insurance i heard very expensive. How much is on the road pricing? bike+rd tax+insucrance..etc?

hurricane known as high end (top speed) bike. but very old already. Can notice the diff by the tail board.

 

For L, N & R model's performance wise, think i leave it to pros n tell u. cos my knowledge is jus some common ones n PTE LIMITED.

 

[anonymouser]

Ouhh..Cool stuff..tempting to buy one babyblade man..haiz