[Group] Yamaha FZ16

[zalk]

[ATTACH=CONFIG]309963[/ATTACH][ATTACH=CONFIG]309963[/ATTACH]

 

Heres the photo that crack. Both shop don't have stock. Hong leong got stock, but confuse with the price. They asked me to go there for clear explanation. Btw my bike is fz16st

 

I think it might help if your photo showed the entire object because now can only see one crack and your reflection.

[zalk]

[ATTACH=CONFIG]309963[/ATTACH][ATTACH=CONFIG]309963[/ATTACH]

 

Heres the photo that crack. Both shop don't have stock. Hong leong got stock, but confuse with the price. They asked me to go there for clear explanation. Btw my bike is fz16st

 

I think it might help if your photo showed the entire object because now can only see one crack and your reflection.

[Toknowmore]

Last saw online it was going for $50. At JB Ah Boy it was RM100. So I would guess.... $35? 30??

 

Thanks a lot, Luminicious!

[sLapshock]

Hi bro. What is reccomemded IDLE Timing and what is the Engine Oil u using?

[ST_Nepal]

Hi my fz16 skidded and these are the damages, any suggestions for replacement or repair pls.

[luminicious]

Hi bro. What is reccomemded IDLE Timing and what is the Engine Oil u using?

 

Idle timing? What do you mean by that?

 

Engine Oil specs are given in the manual, just follow them will do.

I'm using Mobil 1 Full Syn 15W-50

[luminicious]

Hi my fz16 skidded and these are the damages, any suggestions for replacement or repair pls. [ATTACH=CONFIG]310104[/ATTACH][ATTACH=CONFIG]310105[/ATTACH][ATTACH=CONFIG]310106[/ATTACH]

 

Rear brake lever can be replaced, buy the parts at Weda and head to your preferred workshop to get it done or can DIY.

 

Exhaust cover can also be purchased at Weda, easy to diy just need allen keys or you can spray paint it back.

 

Handlebar grips, levers, can purchase at Weda or use after-market ones, your front brake lever looks ok though.

[anonymouser]

anyone intending to purchase new FZ16 soon and going to change tyres straight away? Pls let me know as I am interested to get the back stock tyre from you. Contact @ 9I7O2875.

[sLapshock]

idle timing means the timing of bike at 1 or 2 rpm

[jack oh jack]

I dun noe about others, but i set mine at 4bar (after warm up)

[Jtanc39]

4 bar?! You don't mean 4k rpm right? That's rather high.

[sLapshock]

then why not answer the question bro.

[Jtanc39]

Oops. Oh thought you answered. 1.5 to 2k rpm. Anyway I think you meant idle rpm and not timing right.

[luminicious]

Erm. My bike's idling is at 1.3 - 1.5rpm. Time wise I can idle for the whole day and it would stay there?

[jack oh jack]

4 bar?! You don't mean 4k rpm right? That's rather high.

 

bro the meter show bar ma, this one not needle how to tell 1.3 or 1.5 or 1.7 rpm..haa

[jack oh jack]

anyone want trade coverset?

just gotten this bike at a good deal but the styling dont suit me

Green is paint job, the rest is decal

contact me at 8112 5032

[luminicious]

bro the meter show bar ma, this one not needle how to tell 1.3 or 1.5 or 1.7 rpm..haa

 

Can count ma... haha...

[stealthboi]

my headlamp bulb blow out recently. i googled the bike uses 12V 35/35W. Can i go to any bikeshop to have it replaced? What about some people saying HS1, H4 etc... What does it mean?

[ah_lionel]

my headlamp bulb blow out recently. i googled the bike uses 12V 35/35W. Can i go to any bikeshop to have it replaced? What about some people saying HS1, H4 etc... What does it mean?

 

Most bike shop have it. Or you can get your own from LAB or other source.

 

HS1, H4, H7 are the models...

HS1 35w/35w mean low bean 35w, high beam 35w.

 

dont use other model not made for your bike.. as it will stress the electrical system n burnt out.

[TsuchimiRin]

my headlamp bulb blow out recently. i googled the bike uses 12V 35/35W. Can i go to any bikeshop to have it replaced? What about some people saying HS1, H4 etc... What does it mean?

 

You can pm anodise57 he sells HS1 bulbs for fz16, i bought mine from him.

[stealthboi]

You can pm anodise57 he sells HS1 bulbs for fz16, i bought mine from him.

 

thanks. i've pm-ed anodise57. may i know how is the bulb working now?

[stealthboi]

Most bike shop have it. Or you can get your own from LAB or other source.

 

HS1, H4, H7 are the models...

HS1 35w/35w mean low bean 35w, high beam 35w.

 

dont use other model not made for your bike.. as it will stress the electrical system n burnt out.

 

once again, thanks ah_lionel. meaning i shd get HS1 then

[Toknowmore]

Did anyone installed trax box on this fz16?

Just wanna ask some question and help for choosing a storage box.

What's the price of the trax box? Is it good? Can it fit two helmet?

Where to get it? (Cheapest) And what rack is good?

Other than trax box what other choices that I can get choose that is similar?

Thanks in advance!

[TsuchimiRin]

thanks. i've pm-ed anodise57. may i know how is the bulb working now?

 

Well, the bulb is working as how it should be with the exception that this particular bulb I bought has quite a wider throw angle then the normal bulbs, by how much difference, I cannot tell, just that my friends told me that they thought my bulb is in high beam.

 

Did anyone installed trax box on this fz16?

Just wanna ask some question and help for choosing a storage box.

What's the price of the trax box? Is it good? Can it fit two helmet?

Where to get it? (Cheapest) And what rack is good?

Other than trax box what other choices that I can get choose that is similar?

Thanks in advance!

 

You might want refer to the following thread for your enquiries :

http://www.singaporebikes.com/forums/showthread.php/352696-Trax-box

[luminicious]

Did anyone installed trax box on this fz16?

Just wanna ask some question and help for choosing a storage box.

What's the price of the trax box? Is it good? Can it fit two helmet?

Where to get it? (Cheapest) And what rack is good?

Other than trax box what other choices that I can get choose that is similar?

Thanks in advance!

 

Trax box is good. They're not the really conventional type of boxes, they're rather squarish in shape. If you want something similar to Trax but more practical (imo) you could source the hepco & becker boxes. But the rack itself has to be fabricated at SK or BF.