SBF Runners Cafe 2008 - FXR/VXR/RST

[hitman]

I ever reached 8.85litres of petrol. Mileage only 250km++. Not forgeting the time i've ran out of petrol along PIE, thr mileage if could recall is at 260km. So according to my riding style, my weight and other loads, how well i pump my tyres, i could only manage 260km till total empty. At 150km, the reserve light will come on.

 

u pump 8.85 litre of petrol? i thot the tank is only 8.7 litre?

[hitman]

For me... I have the Hurricane installed as well as a LV pipe... I hit 220Km...

 

220km? u mean ur FC or ur speed?

[spy622]

Selling BRAND NEW Malossi High Compression Cylinder Head for 2stroke

 

http://scooter-center.com/catalog/images/products/big5754.jpg

 

- Material: special die-cast aluminium alloy.

- Cooling circuit sections and paths recalculated and resized (liquid-cooled models).

- Machining: numerically controlled high precision machines with diamond tools.

- Surface rust prevention treatment.

 

 

 

Increase the orginal engine's compression from 9.8:1 to 11:1

The most easiest, cheap n useful way to increase engine performace...

 

With proper tunning and setup, the orginal block together with this compression head will work wonders.

 

In 2stroke tuning, itz all about compression..a simple search on overseas forums, most 180cc owners would rather bolt on a higher compression head for a start than investing on a new aftmkt racing block kit.

 

Go fast price: S$120 nett

* O-rings n gaskets not included

 

If interested pls drop me a PM or sms at 96855010

 

no1 interested in getting faster??...

[lilshah83]

220km? u mean ur FC or ur speed?

 

LoL... FC of course... runner 200vxr hit 220km/h? dream on.. wahhaha...

[lilshah83]

how muchz is hurricane?can it be installed with stock exhaust?

 

I got it for 100 @ mach speed... That's becoz i was doing my full service and they lowered the price... normally, it costs around 120...

 

Hurricane is an open port filter..

[tranceaddict]

u pump 8.85 litre of petrol? i thot the tank is only 8.7 litre?

 

Should be ah... Maybe some of the petrol spill out... Hahaha.

[Iszy23]

I got it for 100 @ mach speed... That's becoz i was doing my full service and they lowered the price... normally, it costs around 120...

 

Hurricane is an open port filter..

 

You got it for $100 for just the Hurricane filter only?

[lilshah83]

You got it for $100 for just the Hurricane filter only?

 

Yeah... the Hurricane filter, installation and tuning...

[runnerwave]

any0ne out there wanna sell fxr rear hugger... the 0ne 0n t0p of the tire... plz.. need it urgent...

[mohgui]

no1 interested in getting faster??...

 

sure would like to but my ride is a 4-stroke lah...

[pornoheft]

Help! My scoot can't start! I have to thank G-Force and WaveK4 for trying to help.

[Reese]

ya... & u never mention wad r the symptoms...

like is there any cranking sound?

[pornoheft]

Well I can't start like I always do. The same thing happened yesterday actually but I did a 'running start'. It was working yesterday, didn't work for me today. There is no sound whenever i press the electric start(and the brake of course) button.

[bandans]

great news guys.. ah pui at mach speed cured my bike.. now its up and running and back to normal operating procedures.. YAHOO!!!!

only downside, pocket got big hole... WAH!!!

but all in all, mach speed did a great job.. thanks to this forum i found out abt mach speed.. thanks a lots guys...

[Reese]

Well I can't start like I always do. The same thing happened yesterday actually but I did a 'running start'. It was working yesterday, didn't work for me today. There is no sound whenever i press the electric start(and the brake of course) button.

 

what is running start? no sound means no cranking. is ur motor oil indicator lighted up when u turn on ur ignition key? check ur fuses & check the contact points on ur battery. make sure the contact points r bright & shiny. if it seems to be corroded jux scrape off the dirt with a pen knife or screw driver

[pornoheft]

what is running start? no sound means no cranking. is ur motor oil indicator lighted up when u turn on ur ignition key? check ur fuses & check the contact points on ur battery. make sure the contact points r bright & shiny. if it seems to be corroded jux scrape off the dirt with a pen knife or screw driver

 

A 'running start' is when i push my bike at a certain speed(oh lets say 5-7km/h?) and then hit the electric start button. It worked once. Thought it would work again. Nothing is wrong with my oil indicator lights or any of my other electronic stuff. I just can't get it to start is all. Maybe you can see the problem if you see my scooter. Where do you live?

[Shawn--]

Selling BRAND NEW Malossi High Compression Cylinder Head for 2stroke

 

http://scooter-center.com/catalog/images/products/big5754.jpg

 

- Material: special die-cast aluminium alloy.

- Cooling circuit sections and paths recalculated and resized (liquid-cooled models).

- Machining: numerically controlled high precision machines with diamond tools.

- Surface rust prevention treatment.

 

 

 

Increase the orginal engine's compression from 9.8:1 to 11:1

The most easiest, cheap n useful way to increase engine performace...

 

With proper tunning and setup, the orginal block together with this compression head will work wonders.

 

In 2stroke tuning, itz all about compression..a simple search on overseas forums, most 180cc owners would rather bolt on a higher compression head for a start than investing on a new aftmkt racing block kit.

 

Go fast price: S$120 nett

* O-rings n gaskets not included

 

If interested pls drop me a PM or sms at 96855010

 

 

Hi, this mod will enhance which performance? The quoted price included installation? Im very interested! My 180 is just a stock bike with a TM carb.

 

My runner got a problem today. I got no idea what happened but the response was on and during my trip back home. What I experience was like the petrol wasnt burning properly or the air was leaking. It combined with abit of backfire sound.

 

What could possibly be the problem?

[spy622]

Hi, this mod will enhance which performance? The quoted price included installation? Im very interested! My 180 is just a stock bike with a TM carb.

 

My runner got a problem today. I got no idea what happened but the response was on and during my trip back home. What I experience was like the petrol wasnt burning properly or the air was leaking. It combined with abit of backfire sound.

 

What could possibly be the problem?

 

it will rise ur compression of ur engine...itz an engine mod

end of day ur whole rev range will be much more responsive n powerful.

 

Check ur spark plug, it might be ur settings dat r out..if not the worst case is a faulty magnet coil or cdi if u also constantly experience cases of "hard to start" or bike "die" while riding halfway for no reasons

[spy622]

Originally posted by spy622@April 23, 2007 02:13 am

Malossi High Compression 52mm Crankshaft for Sale

Suitable for 2 stroke Gilera Runners Only

 

http://www.malossi.com/img_prodotti/53%207621/53%207621.jpg

 

(Information from Malossi website)

R.H.Q. CRANKSHAFTS

 

- The crankshaft is the heart of the endothermic engine.

- All aspects of engine performances start from the crankshaft.

- It is not possible to obtain good engine performance and reliability unless a top-quality crankshaft is fitted.

- This is why Malossi produces only the very best in crankshafts.

 

TECHNICAL SPECIFICATIONS

- Half-shafts material: 18 Ni Cr Mo5.

- Half-shafts with forged monolithic rotating masse.

- Manufactured using high-precision machine tools.

- All components are subjected to 5 heating treatment operations.

- Excellent surface finish for improved reliability.

- Dynamic balancing for speeds of up to 16,000 rpm.

- Coppered connecting rod in forged 18 Ni Cr Mo5, connected to the engine with precision roller bearing for high speeds.

 

 

Crankshaft come reconditioned with new Malossi con-rod, big end and small end bearing ready to use.

 

Price Tag : S$480

 

Interested please call or sms SPY @ 96855010 (might take abit of time to reply)

[spy622]

Used (50km) Malossi 12.5g rollers for sale (size 20x17)

 

http://www.malossi.com/img_prodotti/66%209420/66%209420.jpg

 

 

HTRoll

CALIBRATED ROLLERS WITH HIGH PRECISION

for original speed variators and Multivar.

 

HTRolls are made with CPT with a specific formula and their weight is marked on one side.

 

HTRolls represent a technical spare part for the original one, in a complete series of calibrated elements capable of varying your scooter's transmission ratio and perfectly regulating its speed and acceleration.

 

Operation

Due to the rotation, the weight of the rollers becomes a centrifugal force; the higher the rollers weight, the lower the gear change time, and vice-versa.

 

Variator calibration

To optimize engine's performance, select rollers that in operation, maintain the engine at the highest power regime. By diminishing the rollers weight the engine s RPM increases; on the contrary, by increasing the rollers weight the RPM decreases.

 

*above info from Malossi

 

 

Used Malossi 12.5g rollers for sale.

* Roller orginally bought for tunning purpose but found not suitable thus a low mileage n left unused

 

Mileage used: 50km

Roller Size: 20x17

Roller Weight: 12.5g

Suitable for: 2stroke orginal variators and all aftmkt variators, 4stroke Malossi Multivar variator n Polini Speed Control only

 

Price: $20nett

Interested pls call or sms 96855010

[spy622]

Used SIP scootershop metal carburetor manifold for Sale (Fits 2stroke only)

 

http://www.sip-scootershop.com/upload/images/abbildungen/00000757_003.jpg

http://www.sip-scootershop.com/upload/images/abbildungen/00000758_003.jpg

http://www.sip-scootershop.com/upload/images/abbildungen/00000759_003.jpg

http://www.sip-scootershop.com/upload/images/abbildungen/00001401_003.jpg

 

 

Manifold "Race" SIP Piaggio

 

125/180, 25mm, 55x54x51mm,

26/30mm, short, straight,

*modifications to helmet case and wheel hugger might be needed*

 

 

 

 

The RACE version enables you to keep using a larger carburetor. The shorter intake beefs up your torque. Even more power can be achieved through a modification of the intake manifold membrane to reduce turbulences in the fuel flow. Shortening the intake makes a modification of the helmet compartment necessary. The fenders will have to be modified when using 28 - 30 PHB carburetors to hinder contact with the larger float chamber. We recommend a racing air filter as the original Airbox cannot be used any more.

 

*above description from SIP scooter shop

 

Mikuni TM24 carb can be used on this manifold. But due to the body structure of the TM24 carb, slightly modification had to be made to the rear wheel hugger to ensure extra clearance for the carb position. An extra bracket might have to be mill to rise the manifold's position.

Will be able to assist in installation.

 

*Please beware that some modification have to be made to make it fit EG: cutting of wheel hugger*

 

Hose Clamp and connecting rubber NOT included.

http://www.sip-scootershop.com/upload/images/abbildungen/00011029_001.jpghttp://www.sip-scootershop.com/upload/images/abbildungen/00004568_001.jpg

 

Overall performace will be increase due to the tilt angle of the carb ensuring a much smoother flow of the fuel mixture of the carb into the reed inlet similar to the design of the Malossi carb manifold. With the different design of the angle of how the carb face compare to the Malossi straight manifold, it will also ensure better airflow towards the air filter having lesser restriction of turbulance flow.

Last most important of this product is being metal, it will last much much longer than the normal rubber manifolds.

 

 

Price: $60

 

If interested pls kindly call or sms me at 96855010

[Reese]

wah spy... u machiam garang guni man

so many things to sell

:lol: :lol:

[NoLicense2]

My guess is u just took over the bike not too long. It could be a combination of a few things. Really hard to tell with out looking and hearing your bike. Just ask your mech to do a full check for u to see if your batt is charging properly and if the CDI is really spoilt. But from what u mentioned earlier, my guess is likely your CDI or carb got prob.

 

If your bike is well maintained than starting in the morning shouldn't require u to press the starter so long.

 

my bike is back to life, due to sparkplug wet,carb overflow and goes to sparkplug....luckly change one sparkplug and can move already lol....

thanks guys

[NoLicense2]

buy a spare and keep la..

 

ya good idea, but also need to buyu a tools to open plug...lol

[sheep]

ya good idea, but also need to buyu a tools to open plug...lol

 

add it to the must buy list then.

previous owner gave the set to me.