Honda NSR150SP Riders

MC28 · March 28, 2009

using k&n air filter, the fc will be more jialat right?

The pickup can win R1 lehx..

As history in SBF last time did mention it..The legendary SAF SP..

diqorealistic · March 28, 2009

as below, and my frensssss who went in to do thier bikes. not all but MOST piang aka piston sieze aka piston jam aka wadever sht.

they are only good at certain certain small small stuff leh~

we not going in JB.

for me do in singapore or malaysia same thing. All mechanics can't be trusted. You tell mi, whose bike problem free? Unless u buy first hand then I got nuthing to say la. You go Singapore mechanic, you ask whats wrong, they chop you off. Things that don't need to be fixed they still say spoilt. Not all, but MOSTLY all mechanics are like dat, and you can't deny the facts. This is through experience and other people's experience oso. So change everything and you spend more while they work less on your bike. So basically it comes to the same thing if you goto Malaysia, only difference is you pay lesser.

Plus, I got to disagree with you about those certain certain small small stuff stuff thingy thingy. If what you say is true, why alot of Singaporeans goto jb everyday to overhaul and service and alot of other things? If you're lucky and found a good mechanic there, then you get your money's worth. If you suay2 get the 'choppers', den learn your lesson and find better mechanic. Same thing here in Singapore as well.

And sorry lor I dono you guys not goin jb. Since all tokkin bout causeway and 2nd link 1st link all, I assumed they were. Sorry lor...

Edited March 28, 2009 by diqorealistic

louisyhw · March 28, 2009

you going via where?

kpe -> pie -> aye
or
lorong halus -> tpe -> sle -> bke -> kje -> pie -> aye

you suck thumb. lolx

i dunno haha i meeting dave 1st.

sky 1605199488 · March 28, 2009

hey guys, am having a problem with my bike, but quite hard for me to explain it throught the keyboard, so I would try my best. Haha.

Ok, whenever you guys engage into 1st gear and throttle and change to 2nd gear and so forth, the sound of your engine will be smooth right? Like have the same 'Vrooooooooooom' *engage2ndgear* 'vrooooooooooom' *engage3rd gear.

Mine would be like 'vroooooom chekchekchek' *engage2ndgear* 'vroooooom chekchekchek'..Haha!

It doesnt really make that 'chekchek' sound la, but you get the idea. It just doesnt sound smooth throughout the engagement to 2nd gear. Can this be the con-rod problem? Because my mech told me my conrod quite loose, cause can move side to side abit liao.

So if I change the conrod already, will the engine then sound smooth?

Plus, I was thinking of emptying my stomach, but afriad the sound would be like those krr noisy2 high pitched sound. Will my pipe sound that way if I empty the stomach?

Lastly, any suggestion on how to improve my acceleration and top speed without any 'potting' or meddling with the engineblock or piston or whatsoever that may damage the engine.
Cause I plan to put CDI, change my throttle to fast throttle, changing to super airfilter and emptying half or full stomach. Will this improve my acceleration and top speed?

Thanks all for reading and your suggestions and help would be deeply appreciated!

wa seh! i read already i duno how to react siolx... i so wana laugh =x lol!

y chek chek chek already then say "actually it dint really make chek chek chek"?

MC28 · March 28, 2009

Let me place out this scenario..

Let's take the skills of both the SG mechanic & MS mechanic to be of the same level..

You head to shop A to overhaul your bike..They charge you higher cos they get genuine parts from FJT(Distributor of Honda OEM parts).

You head to some shop in AGL to overhaul your bike..They charge you cheaper cos of exchange rate etc etc..But can you be sure that their parts use is authentic Honda?

So next we compare the wear and tear of non-authentic vs OEM..Which will more reliable??

Alot of ppl go there yes..Becos they charge cheap and one thing found to be very true is alot of them care about 1 time save how much and nt how long that damn part might last..So if i use original chiong which might require me to change that same piece(Saving of 1/3 from OEM) twice or thrice a year compare to getting the original parts and changing it maybe once a year..In the long run, which will save more??

My $0.0002 worth..Feel free to debate..

louisyhw · March 28, 2009

for me do in singapore or malaysia same thing. All mechanics can't be trusted. You tell mi, whose bike problem free? Unless u buy first hand then I got nuthing to say la. You go Singapore mechanic, you ask whats wrong, they chop you off. Things that don't need to be fixed they still say spoilt. Not all, but MOSTLY all mechanics are like dat, and you can't deny the facts. This is through experience and other people's experience oso. So change everything and you spend more while they work less on your bike. So basically it comes to the same thing if you goto Malaysia, only difference is you pay lesser.

Plus, I got to disagree with you about those certain certain small small stuff stuff thingy thingy. If what you say is true, why alot of Singaporeans goto jb everyday to overhaul and service and alot of other things? If you're lucky and found a good mechanic there, then you get your money's worth. If you suay2 get the 'choppers', den learn your lesson and find better mechanic. Same thing here in Singapore as well.

And sorry lor I dono you guys not goin jb. Since all tokkin bout causeway and 2nd link 1st link all, I assumed they were. Sorry lor...

well bro chill, we all have different opinions, for me personally i feel that if u want ur bike tuned to go FAST, i support u go jb. i can tell u their bikes are tuned to really go fast. I believe they have been doing the same tuning over and over again for bikes to go fast, they definitely are more experienced.

If u want ur bike to be tuned for normal riding, i still prefer sg mechs.

lwfc · March 28, 2009

diqorealistic, wah long post.

in forum, we can voice out opinions. but most impt no hard feelings. cos sometimes the way we all post might not sound friendly to other people. others might take it to be hostile.

cos we just sharing out of our own opinions. and our own experience.

we all have differing opinions and experiences. we can choose to accept or not to accept one

lwfc · March 28, 2009

i dunno haha i meeting dave 1st.

what time?

wanna find people go to gp petronas earlier. to drink melon milk

louisyhw · March 28, 2009

what time?

wanna find people go to gp petronas earlier. to drink melon milk

meeting him at 8pm.

sky 1605199488 · March 28, 2009

Let me place out this scenario..

Let's take the skills of both the SG mechanic & MS mechanic to be of the same level..

You head to shop A to overhaul your bike..They charge you higher cos they get genuine parts from FJT(Distributor of Honda OEM parts).

You head to some shop in AGL to overhaul your bike..They charge you cheaper cos of exchange rate etc etc..But can you be sure that their parts use is authentic Honda?

So next we compare the wear and tear of non-authentic vs OEM..Which will more reliable??

Alot of ppl go there yes..Becos they charge cheap and one thing found to be very true is alot of them care about 1 time save how much and nt how long that damn part might last..So if i use original chiong which might require me to change that same piece(Saving of 1/3 from OEM) twice or thrice a year compare to getting the original parts and changing it maybe once a year..In the long run, which will save more??

My $0.0002 worth..Feel free to debate..

the guru has spoken :kowtow:

lwfc · March 28, 2009

meeting him at 8pm.

ooo.. he fast de worrx.

MC28 · March 28, 2009

what time?

wanna find people go to gp petronas earlier. to drink melon milk

Drink liao later feel like wana lao sai during riding..

meeting him at 8pm.

I can foresee that i wont see the both of u at Petronas 2030H..

the guru has spoken :kowtow:

Nope, that one just now somebody use my account to type one..

wait4me · March 28, 2009

for me do in singapore or malaysia same thing. All mechanics can't be trusted. You tell mi, whose bike problem free? Unless u buy first hand then I got nuthing to say la. You go Singapore mechanic, you ask whats wrong, they chop you off. Things that don't need to be fixed they still say spoilt. Not all, but MOSTLY all mechanics are like dat, and you can't deny the facts. This is through experience and other people's experience oso. So change everything and you spend more while they work less on your bike. So basically it comes to the same thing if you goto Malaysia, only difference is you pay lesser.

Plus, I got to disagree with you about those certain certain small small stuff stuff thingy thingy. If what you say is true, why alot of Singaporeans goto jb everyday to overhaul and service and alot of other things? If you're lucky and found a good mechanic there, then you get your money's worth. If you suay2 get the 'choppers', den learn your lesson and find better mechanic. Same thing here in Singapore as well.

And sorry lor I dono you guys not goin jb. Since all tokkin bout causeway and 2nd link 1st link all, I assumed they were. Sorry lor...

er my bike problem free leh .. and onli wear and tear lor ...

when u say a lot of singaporeans go in jb do bike but what u miss out is the cc of the bike.

do u say class 2 bikes doing servicing there?? even if u do , what is the ratio

we are not saying here is better or across the water is better

finally decison is to each indivuidual

diqorealistic, wah long post.

in forum, we can voice out opinions. but most impt no hard feelings. cos sometimes the way we all post might not sound friendly to other people. others might take it to be hostile.

cos we just sharing out of our own opinions. and our own experience.

we all have differing opinions and experiences. we can choose to accept or not to accept one

yap discuss,

, debate suan and shoot

end of day . we jus take it in out stride

MC28 · March 28, 2009

er my bike problem free leh .. and onli wear and tear lor ...
when u say a lot of singaporeans go in jb do bike but what u miss out is the cc of the bike.
do u say class 2 bikes doing servicing there?? even if u do , what is the ratio
we are not saying here is better or across the water is better
finally decison is to each indivuidual

yap discuss,
, debate suan and shoot

end of day . we jus take it in out stride

My shifu has spoken...

Soccer next fri??

sky 1605199488 · March 28, 2009

Nope, that one just now somebody use my account to type one..

Dear Sir,

Do introduce the mentioned guru if you happen to be aware of his identity.

I would gladly meet him out for a supper; even happier if his name happens to be roland.

Thanks in advance!

Yours Faithfully,

sky ^^

MC28 · March 28, 2009

Dear Sir,

Do introduce the mentioned guru if you happen to be aware of his identity.
I would gladly meet him out for a supper; even happier if his name happens to be roland.

Thanks in advance!

Yours Faithfully,
sky ^^

Dear kind sir,

Your appreciation towards the above mention guru is much appreciated by the person himself but i regret to inform you that the guru's name isnt Roland but it's Rolantino Rossi.

Regards,

MC28

kaii69 · March 28, 2009

nahhh did that before liao. thats why now so fast sian of sp...

sian le??

buy haya park 1st lo

Bakua87 · March 28, 2009

I stay woodlands ar bro. Haha. Ur mech at where? good?

my mechanic at amk industrial park 2 name sunburst motorcycle limited.. to me good lor..

Hahah. But sometimes I abit scared to drag gear leh. Haha.
dono, haf this phobia somehow.

some time mus drag to clear carbon de.. or else very hard to ride when u feel that ur exhaust being choke by ownself..

AGL?

good luck.

yup goooooooood luck.. god bless u!

Damn sian! raining abit le~~

stop raining le!!!

why good luck? why the sarcasm? haha

jus purely good luck to u!

using k&n air filter, the fc will be more jialat right?

i don think will make the fc jialat.. sound abit nt nice.. then more high lap..

no la, just that we have differing opinions with doing in jb.
but that doesnt mean they are not good

Talking about opinions, I once had a bad experience at LAB johore. One of the mechanics is damn fcuked up. Seriously la. Too long of a story to type out, but if you guys bought ur accessories there, do not let this mechanic guy(indian fellar, not tryna be racist) do it for you. He fixed my chain and sprocket once and when going back to Sg, the chain broke and boy it was sucha hassle to push back the bike to LAB. With his non chalance attitude, quick smartalec's retorts and irritating face, he even had the cheeks to ask for kopi money if I want the chain and sprocket to be fixed back. I tell you!

I feel like punching the guy's face. Seriously.

relax.. next time don punch..KILL!!

Let me place out this scenario..

Let's take the skills of both the SG mechanic & MS mechanic to be of the same level..

You head to shop A to overhaul your bike..They charge you higher cos they get genuine parts from FJT(Distributor of Honda OEM parts).

You head to some shop in AGL to overhaul your bike..They charge you cheaper cos of exchange rate etc etc..But can you be sure that their parts use is authentic Honda?

So next we compare the wear and tear of non-authentic vs OEM..Which will more reliable??

Alot of ppl go there yes..Becos they charge cheap and one thing found to be very true is alot of them care about 1 time save how much and nt how long that damn part might last..So if i use original chiong which might require me to change that same piece(Saving of 1/3 from OEM) twice or thrice a year compare to getting the original parts and changing it maybe once a year..In the long run, which will save more??

My $0.0002 worth..Feel free to debate..

yup!!! agree with u!!! 100% agree with u!! but mb jus let them choose their own mechanic..

My shifu has spoken...

Soccer next fri??

next fri book out le!!! hahah..

Bakua87 · March 28, 2009

Dear kind sir,

Your appreciation towards the above mention guru is much appreciated by the person himself but i regret to inform you that the guru's name isnt Roland but it's Rolantino Rossi.

Regards,
MC28

upzzz... lol..

HKM · March 28, 2009

guyz...my radiator dry sia...and i rectified the problem with the help of my dad...found out that there was coolant on my spark plug...tats y cannot start...gt water...very wet...so like tis is the top gasket must change rite?...and i suspect my radiator dry coz pressure from the cylinder escaped and go into the radiator and push it out the overflow tube...

ahduck · March 28, 2009

The pickup can win R1 lehx..

As history in SBF last time did mention it..The legendary SAF SP..

I use K&N cone filter cannot win ur K750 lei

Let me place out this scenario..

Let's take the skills of both the SG mechanic & MS mechanic to be of the same level..

You head to shop A to overhaul your bike..They charge you higher cos they get genuine parts from FJT(Distributor of Honda OEM parts).

You head to some shop in AGL to overhaul your bike..They charge you cheaper cos of exchange rate etc etc..But can you be sure that their parts use is authentic Honda?

So next we compare the wear and tear of non-authentic vs OEM..Which will more reliable??

Alot of ppl go there yes..Becos they charge cheap and one thing found to be very true is alot of them care about 1 time save how much and nt how long that damn part might last..So if i use original chiong which might require me to change that same piece(Saving of 1/3 from OEM) twice or thrice a year compare to getting the original parts and changing it maybe once a year..In the long run, which will save more??

My $0.0002 worth..Feel free to debate..

Yah like my rear brake pump piston.

Go there change cos cheap. 1 week later leak brake fluid. (Cos they uses 'original chiong' parts)

Then in the end LLST come back sg do better.

MC28 · March 28, 2009

I use K&N cone filter cannot win ur K750 lei

Yah like my rear brake pump piston.
Go there change cos cheap. 1 week later leak brake fluid. (Cos they uses 'original chiong' parts)
Then in the end LLST come back sg do better.

Of cos larx cos now i using Touch Diamond already mahx..Sold off my SE K750 so long ago...

Bakua87 · March 28, 2009

I use K&N cone filter cannot win ur K750 lei

Yah like my rear brake pump piston.
Go there change cos cheap. 1 week later leak brake fluid. (Cos they uses 'original chiong' parts)
Then in the end LLST come back sg do better.

that why.. if u ask them fix original.. think they will still use chiong de but charge u original price de lor..

Bakua87 · March 28, 2009

sian.. guess all in msia liao by nw. but i in camp doing duty!!!!!

HKM · March 28, 2009

sian.. guess all in msia liao by nw. but i in camp doing duty!!!!!

yalo...very quiet...ok wat camp duty...

Sign In

Join SingaporeBikes.com today! Where Singapore Bikers Unite!

Honda NSR150SP Riders

Recommended Posts

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Join the conversation

Latest Topics