[Group] YAMAHA Fazer

[fir_chan]

any fazer riders here who is below 1.63 m in height? Do you have any problem riding the bike?

 

Interesting... i know for the FZ1, you will probably struggle esp if you were in a jam at the immigration points.... but i am sure you can manage!!! Otherwise you can always lower the bike.... but it wil look different!

[James996]

Hi,

 

No idea yet, will provide the price list after consolidating the orders

 

Can non-fazer bike join the MO bo?

[Xgrind]

I'm about that height... and no issue for me

 

any fazer riders here who is below 1.63 m in height? Do you have any problem riding the bike?

[Xgrind]

Can help you check the price if you want

 

Can non-fazer bike join the MO bo?

[James996]

Hey Fazerians,

 

To get things going, I won't mind helping you guys consolidating the orders and approach Juz Wheelz for MO since I've decided to get raceshield fixed. Before I move on to get your details, I will like to have a list of those who are interested to get raceshield installed (Headlight or Full Package) and hope we get a good price for that. Indicate your bike model as well (GEN1 FZ1, GEN2 FZ1-S, GEN2 FZ1-N, FZ6, FZ6 S2)

 

1. Xgrind (GEN2 FZ1-S) (Front Cowl & Headlight)

2. fir_chan / 8111 7775 / (Gen2 FZ1-N) (Headlight only)

3. skai / 92322383 / (FZ6S 2008) (Headlight)

4. James / 97464874 / (VFR 800 2003) (Headlight only)

5.

6.

7.

8.

9.

10.

 

Thanks for stepping up mate!!

[fir_chan]

Can non-fazer bike join the MO bo?

 

Non fazer now but ex Fazer leh.... somemore always a fazer!!!

 

Cannot also MUST CAN!!!

[Pplater]

Take a guess, riders. How does an air filter wash cause a decrease in fc from 22km/l to 18km/l over one tank?

[Xgrind]

Hmmm, I guess....

 

Cleaner air filter = more air flow

 

And since our ECU can adjust fuel flow (to a certain extent) based on the preset air/fuel ratio, more fuel is pumped into the system to accommodate the additional air flow...hence FC will be affected somehow..

 

Just my guess only... but your drop in FC is kinda drastic though...

 

Take a guess, riders. How does an air filter wash cause a decrease in fc from 22km/l to 18km/l over one tank?

[AR2 Performance]

Can non-fazer bike join the MO bo?

 

YES, non Fazer also can. You can even jio jio your non FZ frens to join in the 1 time MO we approved for the headlamps

 

Minimum order 12 sets of headlamp kits.

[CMYRS]

damm it.

 

should have waited for the MO

 

mine was $500

[longan9]

YES, non Fazer also can. You can even jio jio your non FZ frens to join in the 1 time MO we approved for the headlamps

 

Minimum order 12 sets of headlamp kits.

 

er......... sorry to intrude........

er..... non-fazer allowed, er.... can b-king join in? need for head-light & cowl....... thanks!!!

[maxxmadness]

Hey Fazerians,

 

To get things going, I won't mind helping you guys consolidating the orders and approach Juz Wheelz for MO since I've decided to get raceshield fixed. Before I move on to get your details, I will like to have a list of those who are interested to get raceshield installed (Headlight or Full Package) and hope we get a good price for that. Indicate your bike model as well (GEN1 FZ1, GEN2 FZ1-S, GEN2 FZ1-N, FZ6, FZ6 S2)

 

1. Xgrind (GEN2 FZ1-S) (Front Cowl & Headlight)

2. fir_chan / 8111 7775 / (Gen2 FZ1-N) (Headlight only)

3. skai / 92322383 / (FZ6S 2008) (Headlight)

4. James / 97464874 / (VFR 800 2003) (Headlight only)

5. maxxmadness / (XL1200N) (headlight only)

6.

7.

8.

9.

10.

 

Thanks for stepping up mate!!

[Xgrind]

Hi, will contact you or Lenny once I have consolidated the orders

 

Cheers

 

YES, non Fazer also can. You can even jio jio your non FZ frens to join in the 1 time MO we approved for the headlamps

 

Minimum order 12 sets of headlamp kits.

[maxxmadness]

Hey Fazerians,

 

To get things going, I won't mind helping you guys consolidating the orders and approach Juz Wheelz for MO since I've decided to get raceshield fixed. Before I move on to get your details, I will like to have a list of those who are interested to get raceshield installed (Headlight or Full Package) and hope we get a good price for that. Indicate your bike model as well (GEN1 FZ1, GEN2 FZ1-S, GEN2 FZ1-N, FZ6, FZ6 S2)

 

1. Xgrind (GEN2 FZ1-S) (Front Cowl & Headlight)

2. fir_chan / 8111 7775 / (Gen2 FZ1-N) (Headlight only)

3. skai / 92322383 / (FZ6S 2008) (Headlight)

4. James / 97464874 / (VFR 800 2003) (Headlight only)

5. maxxmadness / (XL1200N) (headlight only)

6.

7.

8.

9.

10.

 

Thanks for stepping up mate!!

oppss canx liao,

 

hi stanley, catch up with you as planned.,,,thanks bro...

[maxxmadness]

Hey Fazerians,

 

To get things going, I won't mind helping you guys consolidating the orders and approach Juz Wheelz for MO since I've decided to get raceshield fixed. Before I move on to get your details, I will like to have a list of those who are interested to get raceshield installed (Headlight or Full Package) and hope we get a good price for that. Indicate your bike model as well (GEN1 FZ1, GEN2 FZ1-S, GEN2 FZ1-N, FZ6, FZ6 S2)

 

1. Xgrind (GEN2 FZ1-S) (Front Cowl & Headlight)

2. fir_chan / 8111 7775 / (Gen2 FZ1-N) (Headlight only)

3. skai / 92322383 / (FZ6S 2008) (Headlight)

4. James / 97464874 / (VFR 800 2003) (Headlight only)

5.

6.

7.

8.

9.

10.

 

Thanks for stepping up mate!!

[Constructicon]

Hi people,

 

I got a question regarding my Gen 1 FZS1000.

 

Either it's always there or just that I noticed it recently, there's this high frequency vibrations along the stock handlebar. The ERP unit, which is mounted on it, buzzes even worse.

The handlebar balancers are properly tightened, the bike serviced, the windscreen is tight (I tink), but the vibes are there. It's a buzzing feeling, gets to me very fast.

 

Is it the same with you guys? Juz seems to get a bit more noticeable recently. Dun remember its so bad a few weeks back.

[mokamoka]

Hi people,

 

I got a question regarding my Gen 1 FZS1000.

 

Either it's always there or just that I noticed it recently, there's this high frequency vibrations along the stock handlebar. The ERP unit, which is mounted on it, buzzes even worse.

The handlebar balancers are properly tightened, the bike serviced, the windscreen is tight (I tink), but the vibes are there. It's a buzzing feeling, gets to me very fast.

 

Is it the same with you guys? Juz seems to get a bit more noticeable recently. Dun remember its so bad a few weeks back.

 

Check your meter and also your 2 pieces of black plastics on the side... those are known to cause vibrations... A "never close properly" IU cover also vibes a lot too...

 

Anyway 9pm @ Lavender Food Centre tonight, 12th Aug 2008...

[mokamoka]

oppss canx liao,

 

hi stanley, catch up with you as planned.,,,thanks bro...

 

What canx liao???

[Speedpass]

Hi people,

 

I got a question regarding my Gen 1 FZS1000.

 

Either it's always there or just that I noticed it recently, there's this high frequency vibrations along the stock handlebar. The ERP unit, which is mounted on it, buzzes even worse.

The handlebar balancers are properly tightened, the bike serviced, the windscreen is tight (I tink), but the vibes are there. It's a buzzing feeling, gets to me very fast.

 

Is it the same with you guys? Juz seems to get a bit more noticeable recently. Dun remember its so bad a few weeks back.

 

 

Yup , had tis problem on my gen2 ever since i dismantled the black side panels to replace my headlight bulbs . Anyway , the problem onli surfaces when rpm is arnd 4-5k rpm . So i either ride below or abv tat range .

[tweety64]

How much did the full set cost you?

 

FZ1 Fazer (fairing version) full kit : S$361/-

 

 

TOTAL COVERAGE :- 13 PIECES

 

1) Headlamp (L)

2) Headlamp ®

3) Tank ©

4) Tank (L)

5) Tank ®

6) Front Cowl ©

7) Front Cowl (top L)

8) Front Cowl (top R)

9) Front Cowl (side L)

10) Front Cowl (side R)

11) Front Fender ©

12) Front Fender (L)

13) Front Fender ®

 

 

To me it's worth it to protect my lovely bike....

[aeX]

ooo not cheap... but i think its worth it.

[fir_chan]

What canx liao???

 

I thnk he meant cancel....

 

correct if i am wrong!

[AR2 Performance]

er......... sorry to intrude........

er..... non-fazer allowed, er.... can b-king join in? need for head-light & cowl....... thanks!!!

 

Yes B-king can. This MO is meant for headlamps, no limited a particular model. As long minimum order of 12 headlamp kits. Kindly check with your representative to add in your name/nick..

 

MO only valid for headlamp kits.

[aeX]

Hey Fazerians,

 

To get things going, I won't mind helping you guys consolidating the orders and approach Juz Wheelz for MO since I've decided to get raceshield fixed. Before I move on to get your details, I will like to have a list of those who are interested to get raceshield installed (Headlight or Full Package) and hope we get a good price for that. Indicate your bike model as well (GEN1 FZ1, GEN2 FZ1-S, GEN2 FZ1-N, FZ6, FZ6 S2)

 

1. Xgrind (GEN2 FZ1-S) (Front Cowl & Headlight)

2. fir_chan / 8111 7775 / (Gen2 FZ1-N) (Headlight only)

3. skai / 92322383 / (FZ6S 2008) (Headlight)

4. James / 97464874 / (VFR 800 2003) (Headlight only)

5. Alex / 96951720 / (Gen2 FZ1-S) (Headlight only)

6.

7.

8.

9.

10.

 

Thanks for stepping up mate!!

[Xgrind]

Here's the updated list:

 

1. Xgrind (GEN2 FZ1-S) (Headlight)

2. fir_chan / 8111 7775 / (Gen2 FZ1-N) (Headlight only)

3. skai / 92322383 / (FZ6S 2008) (Headlight)

4. James / 97464874 / (VFR 800 2003) (Headlight only)

5. Alex / 96951720 / (Gen2 FZ1-S) (Headlight only)

6.

7.

8.

9.

10.

11.

12.

 

Will keep this open up to this Fri. 7 more to go....