[Group] YAMAHA Fazer

[pichudot]

with the usage of projectors i can have proper light throw, y not HID? hehe. see how lah. clearer when on nshw. then if i can get another 2 projectors installed on my bike, 4x HID on bike! blast those cars with 4 HIDs when its not needed! then my bike battery very fast flat also i think. haha.

 

yea yea...

[pichudot]

so when u wanna visit eugene???

 

next week! sms me ur number ok? get my number from stanco ok?

[pichudot]

Lemme know too...wanna get the battery conditioner thingy and lighbulb from Limbat =)

 

lol... ok dragonforce to okt this ride...

[pichudot]

if there is 1 pipe approved/legal on the road, why other 9 pipes cannot be legal? same model, same part number, same technical drawings..

 

unless paperworks are not complete, OR distributor don't wan to promote the particular branding.

 

distributor wouldn't be that stupid not to make extra monie if possible, unless it's impossible as aftermarket exhaust is not cheap in SG...

[pichudot]

is that the reason for the unfamiliar fingerprints marks i found on my bike this morning?

 

so how many sets of fingerprints you found? wahahahahaha!

[gwzc_mk2]

next week! sms me ur number ok? get my number from stanco ok?

 

pm-ed u already

[pichudot]

pm-ed u already

 

got that... sms u already...

btw, we might need to go earlier a bit cus i noticed these days eugene had been closing pretty early...

i think if going, i'll give him a call 1st...

 

anyway, when u will be free to go down in the day time between the even days of 11th to 24th of this month?

Edited November 10, 2010 by pichudot

[hondawavefan]

An update to my situation guys. Thanx superspeed123 bro for really coming down to jump start the the bike in the hot afternoon. (I will treat you something on the next LKS if I can make it). Unfortunately jump start did not work.

 

So I got the bike towed from my workplace to my MSCP. Then I went to a workshop in Yishun and got a Yuasa but model TTZ146S for $120. They tested the battery and it cannot charge, left with only 2 volts or so. (its a 4 mths old bike). Did not have the time to go to Bikeworkz to get the battery as per superspeed bro's recommendation.

 

When I fixed the battery, the meter still did not light up after turning the ignition to ON. I checked the fuse, the 50A fuse was blown. Argh. By the time, its too late. I guess I will get down to Automachinery tomorrow to get one.

 

If the 50A fuse blown, does it mean that my bike shorted or something?

[pichudot]

An update to my situation guys. Thanx superspeed123 bro for really coming down to jump start the the bike in the hot afternoon. (I will treat you something on the next LKS if I can make it). Unfortunately jump start did not work.

 

So I got the bike towed from my workplace to my MSCP. Then I went to a workshop in Yishun and got a Yuasa but model TTZ146S for $120. They tested the battery and it cannot charge, left with only 2 volts or so. (its a 4 mths old bike). Did not have the time to go to Bikeworkz to get the battery as per superspeed bro's recommendation.

 

When I fixed the battery, the meter still did not light up after turning the ignition to ON. I checked the fuse, the 50A fuse was blown. Argh. By the time, its too late. I guess I will get down to Automachinery tomorrow to get one.

 

If the 50A fuse blown, does it mean that my bike shorted or something?

 

bro, if i'm not wrong, 50A fuse is the main fuse lei, something might be gone wrong to make it really blow...

nevertheless, try getting another 50A fuse to try 1st before you start all those tedious troubleshooting works...

if it blows again, then you can start worrying into the electronics side...

for now, don't worry too much, get a new 50A fuse to replace it, need not from AM, you can get it from Sim Lim Tower...

alternatively, i also have a spare...

[superspeed123]

bro, if i'm not wrong, 50A fuse is the main fuse lei, something might be gone wrong to make it really blow...

nevertheless, try getting another 50A fuse to try 1st before you start all those tedious troubleshooting works...

if it blows again, then you can start worrying into the electronics side...

for now, don't worry too much, get a new 50A fuse to replace it, need not from AM, you can get it from Sim Lim Tower...

alternatively, i also have a spare...

 

Any ideas how much is all the fuses on our bike?? thought of keeping as spares for touring.

[oktray]

u r one lucky dude bro! i never ever dare to use the ciggy socket during rainy days... u never know when it will short circuit your bike and/or blow some fuses...

so r u getting new ones? get awin to go to limbat get it together?

let me know when u will be going ok? i'm in shift mode from tomorrow till 24th... odd days shift on, even days off... but i still get to go back home in the evening during shift on, 8-5 style and the best thing is, i still get my off! such a nice reservist style hor? wahahahaha!

 

wah, sibei song lor

[aRcHeR]

distributor wouldn't be that stupid not to make extra monie if possible, unless it's impossible as aftermarket exhaust is not cheap in SG...

 

LTA do not have the facilities/capabilities to do emission testings.. all that they rely on is just a piece of certification to approve and key into VITAS. you own 2 different brands of exhaust and did inspection before. don't tell me you don't know how they do inspection?

 

got cert and paperwork = approved.

 

and are you the distributor? perhaps manufacturer support isn't there? hence they dun wan to promote? do you know about all these?

[dragonforce]

lol... ok dragonforce to okt this ride...

 

how come me? lol. maybe next sat lo..

 

distributor wouldn't be that stupid not to make extra monie if possible, unless it's impossible as aftermarket exhaust is not cheap in SG...

 

the reason is.... i will tell you when we meet up if you are interested to know.

[dragonforce]

sorry duplicate post..

[Yatz86]

how come me? lol. maybe next sat lo..

 

 

 

the reason is.... i will tell you when we meet up if you are interested to know.

 

sad.....next saturday got economics paper

[dragonforce]

sad.....next saturday got economics paper

 

you still have time to revise.. all the best dude! i finished mine, likely to retake at least 1 paper.

[dragonforce]

sad.....next saturday got economics paper

 

you still have time to revise.. all the best dude! i finished mine, likely to retake at least 1 paper.

[Kuku_san]

Hi to all Frazer bro been scouting at Frazer 1000cc quite a long times and decided to buy a 2nd hand naked frazer 08 series but will like to ask some question from all experience bro here abt this naked bikes hope can give some tips abt this babe....

 

-dose this bike magnetic coil easily spoil and been hear from my few friend saying yamaha magnetic coil easily spoil and very very expensive to change abt $1000++?? and of course i will riding on Singapore only....And does this 08 series had any major bikes problems? i dun mean those wear and tear parts but abt the engine concern...thanks....

[Awin]

btw awin bro, u looking for such ciggy socket too?

 

Yup thot of installin it. btw when the next diy?

[Yatz86]

Hi to all Frazer bro been scouting at Frazer 1000cc quite a long times and decided to buy a 2nd hand naked frazer 08 series but will like to ask some question from all experience bro here abt this naked bikes hope can give some tips abt this babe....

 

-dose this bike magnetic coil easily spoil and been hear from my few friend saying yamaha magnetic coil easily spoil and very very expensive to change abt $1000++?? and of course i will riding on Singapore only....And does this 08 series had any major bikes problems? i dun mean those wear and tear parts but abt the engine concern...thanks....

 

Coil dont spoil so easily...yes it is an expansive part to change. But u can be sure that it will cost below $1k. It's $320 to be exact for OEM.

 

Other than that, there are no major problems for 08 FZ6. Just do normal maintanence like any other class 2 bike...

[hondawavefan]

bro, if i'm not wrong, 50A fuse is the main fuse lei, something might be gone wrong to make it really blow...

nevertheless, try getting another 50A fuse to try 1st before you start all those tedious troubleshooting works...

if it blows again, then you can start worrying into the electronics side...

for now, don't worry too much, get a new 50A fuse to replace it, need not from AM, you can get it from Sim Lim Tower...

alternatively, i also have a spare...

 

SLT have ar? K thx..will go and find it today.

[maxxmadness]

so how many sets of fingerprints you found? wahahahahaha!

 

CSI crime lab is still checking, they have yet to get back to me...

Edited November 11, 2010 by maxxmadness

[crankcase]

SLT have ar? K thx..will go and find it today.

 

Normally your bike should have a full set of spare fuses under the seat, around the battery area. I know my '03 FZ1 does - I blew my main fuse when I plugged in my battery the wrong way around Just replace with the spare, and buy a new spare later.

 

And yes, Sim Lim Tower will have, take along your old fuse to be sure you get something identical. Good luck!

[maxxmadness]

you dont have to go to sim lim to get them unless you are passing by or have some other matters at sim lim, petrol kiosk, ntuc, hardware shops, they do sell them..just that sim lim you may get it a little cheaper, but the trip and petrol to go there, a case of penny wise pound foolish

[DrRipper]

An update to my situation guys. Thanx superspeed123 bro for really coming down to jump start the the bike in the hot afternoon. (I will treat you something on the next LKS if I can make it). Unfortunately jump start did not work.

 

So I got the bike towed from my workplace to my MSCP. Then I went to a workshop in Yishun and got a Yuasa but model TTZ146S for $120. They tested the battery and it cannot charge, left with only 2 volts or so. (its a 4 mths old bike). Did not have the time to go to Bikeworkz to get the battery as per superspeed bro's recommendation.

 

When I fixed the battery, the meter still did not light up after turning the ignition to ON. I checked the fuse, the 50A fuse was blown. Argh. By the time, its too late. I guess I will get down to Automachinery tomorrow to get one.

 

If the 50A fuse blown, does it mean that my bike shorted or something?

 

This is interesting, can't find that part number from Yusa. They are usually YT... YB... YI... 12N...

 

The stock and probably the best I can find so far is YTZ14S. Factory activated maintenance free, so no need to fill up with liquid before use.

 

Buy a few 50A. If it blows when you start up, then you'll know there's some short.

 

Yes, there are some spare fuses in the fuse box.