[Group] YAMAHA Fazer

[DeusExMachina]

The last time I used a TTZ, the frickin' thing lasted a whole two weeks before going flat again.

I replaced it with a YTZ.

[superspeed123]

This is interesting, can't find that part number from Yusa. They are usually YT... YB... YI... 12N...

 

The stock and probably the best I can find so far is YTZ14S. Factory activated maintenance free, so no need to fill up with liquid before use.

 

Buy a few 50A. If it blows when you start up, then you'll know there's some short.

 

Yes, there are some spare fuses in the fuse box.

 

FZ1 Gen 2 is using Yuasa YTZ14S. AM selling $220, Bikeworkz selling $160.

According to the owner manual, only one 10A spare fuse.

[superspeed123]

Coil dont spoil so easily...yes it is an expansive part to change. But u can be sure that it will cost below $1k. It's $320 to be exact for OEM.

 

Other than that, there are no major problems for 08 FZ6. Just do normal maintanence like any other class 2 bike...

 

AM is selling FZ1 Gen 2 magnetic coil for $288/- as informed by dolf. Autocycle selling $350 over phone.

[Yatz86]

AM is selling FZ1 Gen 2 magnetic coil for $288/- as informed by dolf. Autocycle selling $350 over phone.

 

bo pian...my bike died at K&T a year ago ....coil, rectifier and starter relay was fried, battery bloated...still remember the total bill $688

[maxxmadness]

AM is selling FZ1 Gen 2 magnetic coil for $288/- as informed by dolf. Autocycle selling $350 over phone.

 

why the big diff in price? guess autocycle one is made out of gold?

[buddie]

Yup thot of installin it. btw when the next diy?

Yea, I want this too. Can include me in?

 

can DIY and try pumping silicon into the handlebar to dampen the vibrations..

 

most MX handlebars are filled with silicon rubber..

 

Where to get the silicon? Plastic surgeons?

 

I just went to Motoworld just now and they told me they had stop bringing barsnake. reason given is not so easy to install into the handlebars. Another way to reduce the vibration is to put silicone into the handlebars and it works as well as quote by a former Fz6 rider who did it. But his advise is not easy to push the normal slicone into the bars. Thinking of doing it too to reduce the vibrations.

That's too bad...

 

Lemme know too...wanna get the battery conditioner thingy and lighbulb from Limbat =)

 

Speaking of headlight, I think mine is stock and I find it pretty bright... these upgraded bulbs u guys talking abt.. must be pretty blinding huh?

[superspeed123]

why the big diff in price? guess autocycle one is made out of gold?

 

I asked the sales person whether it is the OEM latest model magnetic coil part number :2D1-81410-10-00 (old model magnetic coil aka stator coil: 2D1-81410-01-00) and he say yes. So dun know whether AM is selling new model or old model. for references for all part numbers at http://www.mrcycles.com . Cheers!!

[maxxmadness]

I asked the sales person whether it is the OEM latest model magnetic coil part number :2D1-81410-10-00 (old model magnetic coil aka stator coil: 2D1-81410-01-00) and he say yes. So dun know whether AM is selling new model or old model. for references for all part numbers at http://www.mrcycles.com . Cheers!!

 

sad...guess consumers are the real victims, no reference prices and up to individual shops to shout their prices

[hondawavefan]

Normally your bike should have a full set of spare fuses under the seat, around the battery area. I know my '03 FZ1 does - I blew my main fuse when I plugged in my battery the wrong way around Just replace with the spare, and buy a new spare later.

 

And yes, Sim Lim Tower will have, take along your old fuse to be sure you get something identical. Good luck!

 

you dont have to go to sim lim to get them unless you are passing by or have some other matters at sim lim, petrol kiosk, ntuc, hardware shops, they do sell them..just that sim lim you may get it a little cheaper, but the trip and petrol to go there, a case of penny wise pound foolish

 

And so I went to SLT and asked from shops on Level 1 and basement. All of them did not have it. Frustrated I went to Automachinery and got it for $12 for one piece. It looks like this fyi:

 

http://www.consumabulbs.com/photo/female%20pal%20fuse%2050a.jpg

 

This is interesting, can't find that part number from Yusa. They are usually YT... YB... YI... 12N...

 

The stock and probably the best I can find so far is YTZ14S. Factory activated maintenance free, so no need to fill up with liquid before use.

 

Buy a few 50A. If it blows when you start up, then you'll know there's some short.

 

Yes, there are some spare fuses in the fuse box.

 

The last time I used a TTZ, the frickin' thing lasted a whole two weeks before going flat again.

I replaced it with a YTZ.

 

Ok I will test this TTZ out first since I already bought it and see how.

[crankcase]

And so I went to SLT and asked from shops on Level 1 and basement. All of them did not have it. Frustrated I went to Automachinery and got it for $12 for one piece.

Hmm... that's very surprising. I can't remember where I bought my replacement fuse from now. It's the cheapo China-made type, not OEM, cost ~$2-3 I think. I thought it was SLT, but it might just have been my workshop. Tough luck mate

[dragonforce]

how do we calculate how many A fuse do we need? i need to get 1 for my cig socket..

[konspire]

Hi all bros, just need some pointers, any good shop to recommend getting a fz1? First or 2nd hand doesn't matter. Thxs.

[dragonforce]

Hi all bros, just need some pointers, any good shop to recommend getting a fz1? First or 2nd hand doesn't matter. Thxs.

 

go to bike production for reasonable prices and good interest rate. can check out asphoon also.

[aRcHeR]

 

Where to get the silicon? Plastic surgeons?

 

those DIY shops.. or those neighbourhood hardware shop..

[buddie]

how do we calculate how many A fuse do we need? i need to get 1 for my cig socket..

This guy is using 10A. Check out his "ingredient". Got inline fuse holder from radioshack. Maybe SLT got such item?

 

those DIY shops.. or those neighbourhood hardware shop..

I'll ask ard. Thanks

[pichudot]

Any ideas how much is all the fuses on our bike?? thought of keeping as spares for touring.

 

for fz1, it should be:

1 x 50A

1 x 25A

2 x 15A

4 x 10A

 

for fz1 abs, it should be:

1 x 50A

1 x 30A

1 x 25A

2 x 15A

5 x 10A

 

for fz6, it should be:

1 x 30A

2 x 20A

4 x 10A

 

for fz6 abs, it should be:

2 x 30A

2 x 20A

5 x 10A

 

for me, i keep:

2 x 50A

2 x 25A

2 x 20A

2 x 15A

2 x 10A

[pichudot]

Normally your bike should have a full set of spare fuses under the seat, around the battery area. I know my '03 FZ1 does - I blew my main fuse when I plugged in my battery the wrong way around Just replace with the spare, and buy a new spare later.

 

And yes, Sim Lim Tower will have, take along your old fuse to be sure you get something identical. Good luck!

 

bro, i think it's not really a full set... it should be a set of important spare fuses...

 

 

you dont have to go to sim lim to get them unless you are passing by or have some other matters at sim lim, petrol kiosk, ntuc, hardware shops, they do sell them..just that sim lim you may get it a little cheaper, but the trip and petrol to go there, a case of penny wise pound foolish

 

can visit the nearby poison places mah... plan it into the itinerary...

 

 

SLT have ar? K thx..will go and find it today.

 

And so I went to SLT and asked from shops on Level 1 and basement. All of them did not have it. Frustrated I went to Automachinery and got it for $12 for one piece. It looks like this fyi:

 

http://www.consumabulbs.com/photo/female%20pal%20fuse%2050a.jpg

 

bro, level 3 got... confirm... $0.50 per piece, regardless of how high is the Ampere... oops!

 

 

how do we calculate how many A fuse do we need? i need to get 1 for my cig socket..

 

bro, depending on what you use for your ciggy, the Ampere differences...

[pichudot]

LTA do not have the facilities/capabilities to do emission testings.. all that they rely on is just a piece of certification to approve and key into VITAS. you own 2 different brands of exhaust and did inspection before. don't tell me you don't know how they do inspection?

 

got cert and paperwork = approved.

 

and are you the distributor? perhaps manufacturer support isn't there? hence they dun wan to promote? do you know about all these?

 

so u got ur mivv exhaust installed? i bet no right?

[pichudot]

how come me? lol. maybe next sat lo..

 

the reason is.... i will tell you when we meet up if you are interested to know.

 

Yup thot of installin it. btw when the next diy?

 

Yea, I want this too. Can include me in?

 

@dragonforce

actually i know why too...

back to topic, jus nice, me should be free next sat...

u wan to go limbat get then do diy also can, let me know early, i may be interested to put the fender extender diy session together...

 

@Awin & @Yatz86

next sat fender extender diy session steady bo? if good, i'll jio the rest...

let me know ya schedule...

 

@buddie

let dragonforce okt!

[Yatz86]

Speaking of headlight, I think mine is stock and I find it pretty bright... these upgraded bulbs u guys talking abt.. must be pretty blinding huh?

 

yeap...its blueish white light....but hor i find the light throw not as good as the stock when on NSHW...

[pichudot]

CSI crime lab is still checking, they have yet to get back to me...

 

hohoho!

[pichudot]

bo pian...my bike died at K&T a year ago ....coil, rectifier and starter relay was fried, battery bloated...still remember the total bill $688

 

i pity that guy who fetch u around that day... hehehe!

[pichudot]

yeap...its blueish white light....but hor i find the light throw not as good as the stock when on NSHW...

 

try HIR bulbs... cheaper than HID and it's almost as good as HID...

u should join me for a night ride trip be it short or long la, then u know how good...

but, u too busy wif ur CO la...

[Yatz86]

i pity that guy who fetch u around that day... hehehe!

 

errr...i thankful to the guy:thumb:

 

try HIR bulbs... cheaper than HID and it's almost as good as HID...

u should join me for a night ride trip be it short or long la, then u know how good...

but, u too busy wif ur CO la...

 

CO means???

 

i really bz lei, i just settle in with my new job.........

 

bukit indah counted or not as trip?

Edited November 11, 2010 by Yatz86

[pichudot]

errr...i thankful to the guy:thumb:

 

CO means???

 

really bz lei......

 

bukit indah counted or not as trip?

 

so when u buying drink for that guy?

 

CO i think they means Commanding Officer ba...

 

yea bukit indah do means a trip as well! as long u get to pitch black places then u can see how the light throw for HIR already...

how's ya schedule for next sat? perhaps can input it into the day itinerary... refer to previous posts...