Yamaha FJR1300

[ashenZ]

hey anyone knowz wotz the price of mobil 1 racing 4T at lab now?

[mutant_sheep]

Originally posted by antchiew44@Mar 16 2006, 01:57 AM

Can i know wat is TB syn????? :confused:

TB sync is mean trottle body syncronize

it is like tuning ur caburetor, but TBS is tune ur fuel injection.

it claims it will make ur bike back to powerfull again after certain millage.

[antchiew44]

Originally posted by mutant_sheep@Mar 16 2006, 09:12 AM

TB sync is mean trottle body syncronize

it is like tuning ur caburetor, but TBS is tune ur fuel injection.

it claims it will make ur bike back to powerfull again after certain millage.

oicic ....pls update after u done.....

[Guest cheeko]

Hi dammie, for ur reference, this the route tat i plan to take this weekend Join me if u wan

[omnislash]

Originally posted by ashenZ@Mar 16 2006, 01:29 AM

how they do TBS??

 

with the mercury pressure gauge machine issit?

 

mi goin 30,000km.. hvn done b4... see when u free... bring mi down to ur mechanic to do lehh.....

 

anyway.. i nvr trust HL... i dun trust things i dun see n they juz tell u....

 

anyway.. i hv my fair share of HL expertise n service... my FJR tink was in n out of it for 6times or more i tink.. for d 1st 3mths...

 

nopezz... i dun tik i wud wana go.. unless realli realli nid....

No problem. If you free, i can bring you to him tmr or saturday. Before that, i would suggest you buy ur plugs youself. Plugs get from him quite ex. Go FJT and get.

 

I only free after 4.30pm on friday. And he closes at 6.30pm like that. If we go on Friday, most prob u've got to leave it overnight. If go Satuday morning, evening should be able to get. He's the mechanic and the boss.

[omnislash]

Originally posted by antchiew44@Mar 16 2006, 01:57 AM

Can i know wat is TB syn????? :confused:

Yo bro..

 

Purpose

 

To achieve equalized fuel/air delivery to the engine cylinders at idle and moderate throttle openings. The result is to produce a smooth and more efficient running engine.

 

quoted from TB sync

 

We cant meddle with the fuel injection amount unless we touch the ECU. So we can only adjust the amount of air to achieve the above.

 

@ash - btw, our manual says we are only suppose to touch the air screw. However, my mech uses the throttle valve screw to adjust which is perfectly fine, according to some of the "experts" that i've asked. GSX600 (and alot of other bikes also uses the throttle valve screws. And my mileage is 60,000 and its still running. So it should be alrite.)

Pai Seh, tok so much. Basically, i just want to tell you this in case some other day you come to me and complain my mech anyhow do.

[deanz4]

Originally posted by ashenZ@Mar 14 2006, 08:42 PM

im gona change to remus.. once i hv the $$$$...

 

but now.... sigh... juz wanna fix up it up till it runz smoothli...

 

i nid my pannierSSS~!!~~!

bro i just get a quotation from the distributer... a titanium is 1100 den the carbon is 1500.. remus revolution ah my dream ones...

[deanz4]

yo omnilash where u bring yr bikes to???

just wondering... currently the only shop that i bring my bikey to is loois... is there other reliable shop u guys would like to recommend.. and by the way if can attach the address too...

 

 

thanks

[ashenZ]

$1100??~!!~!~

 

still can bargain abit bohh??

 

fwahh good deal leh~!~!~! argghh~! if onli i hv $1.1K@~~@!

[antchiew44]

Originally posted by omnislash@Mar 16 2006, 09:53 PM

Yo bro..

 

Purpose

 

To achieve equalized fuel/air delivery to the engine cylinders at idle and moderate throttle openings. The result is to produce a smooth and more efficient running engine.

 

quoted from TB sync

 

We cant meddle with the fuel injection amount unless we touch the ECU. So we can only adjust the amount of air to achieve the above.

 

@ash - btw, our manual says we are only suppose to touch the air screw. However, my mech uses the throttle valve screw to adjust which is perfectly fine, according to some of the "experts" that i've asked. GSX600 (and alot of other bikes also uses the throttle valve screws. And my mileage is 60,000 and its still running. So it should be alrite.)

Pai Seh, tok so much. Basically, i just want to tell you this in case some other day you come to me and complain my mech anyhow do.

:thumb:

[antchiew44]

Originally posted by omnislash@Mar 16 2006, 09:53 PM

Yo bro..

 

Purpose

 

To achieve equalized fuel/air delivery to the engine cylinders at idle and moderate throttle openings. The result is to produce a smooth and more efficient running engine.

 

quoted from TB sync

 

We cant meddle with the fuel injection amount unless we touch the ECU. So we can only adjust the amount of air to achieve the above.

 

@ash - btw, our manual says we are only suppose to touch the air screw. However, my mech uses the throttle valve screw to adjust which is perfectly fine, according to some of the "experts" that i've asked. GSX600 (and alot of other bikes also uses the throttle valve screws. And my mileage is 60,000 and its still running. So it should be alrite.)

Pai Seh, tok so much. Basically, i just want to tell you this in case some other day you come to me and complain my mech anyhow do.

:thumb:

[mutant_sheep]

ok. HL is deep as i will say.

my babe "operation fees" is 150buck for labour & tentioner. they refuse to do TBS for me. but they told me that they have done TB balancing for me, which is i donno what the hack is that.

[omnislash]

Originally posted by deanz4@Mar 17 2006, 04:27 AM

yo omnilash where u bring yr bikes to???

just wondering... currently the only shop that i bring my bikey to is loois... is there other reliable shop u guys would like to recommend.. and by the way if can attach the address too...

 

 

thanks

If ur want to try out sth new, can go to Perfection Motors. Address I think its the industrial estate near Eunos Ave 5 that side. Its block 1044. The boss is the mech, His name is Alan.

[deanz4]

so who i look for alan???

 

but is he reliable???

 

 

anymore gd mechanic??

 

antchiew44?? where u guys bring yr darling to??

[ashenZ]

Originally posted by mutant_sheep@Mar 17 2006, 07:43 PM

ok. HL is deep as i will say.

my babe "operation fees" is 150buck for labour & tentioner. they refuse to do TBS for me. but they told me that they have done TB balancing for me, which is i donno what the hack is that.

for tensioner n labour is cheap liao bahh..... i was charged ard dat price when i did at Loois'..

 

But at least i can see n know wot he did... n not juz hear....

[antchiew44]

Originally posted by deanz4@Mar 18 2006, 05:54 AM

so who i look for alan???

 

but is he reliable???

 

 

anymore gd mechanic??

 

antchiew44?? where u guys bring yr darling to??

we always go to Southern Motor -Ah Heng :lovestruck:

he know well about FJR. :thumb:

[Guest cheeko]

Yo guys, if u drop by segamat, must remember to try out their famous ice kopi & kaya toast power

 

http://www.photovideoi.com/share/upload/2006/03/18/21/pict0004.jpg

 

http://www.photovideoi.com/share/upload/2006/03/18/21/pict0005.jpg

[omnislash]

Originally posted by deanz4@Mar 18 2006, 05:54 AM

so who i look for alan???

 

but is he reliable???

 

 

anymore gd mechanic??

 

antchiew44?? where u guys bring yr darling to??

Yup. He's the boss and the mechanic. Thats what i like about it. He does a good job cuz he got a reputation to keep. Mechanics work for the shop, not for you.

 

Regarding Ah Heng, Ash can give you some of his views.. Right Ash?

[mutant_sheep]

HL make me feel &

they suppose to deliver my babe back to me at yesterday (18/3/06), but they simply told me that they have only half strenght of ppl working due to some "important" worker on leave & they don't have special tools to take out the stupid tensioner from my babe.

[ashenZ]

Ah Heng not baD~! but cun say for the shop....

 

ah pui : wah rau.. pls lahh.. tensioner dun nid special tool wan..... haha...

[deanz4]

seems like HL is simply lazy bunch of ppl

[ashenZ]

not lazy bunch... juz not professional n skilled enuf...

[mutant_sheep]

after saturday f***ing session at HL, finally they kam guan return my babe at 2day.

[deanz4]

i think u need to do that before they can do things.. by the way can we buy the tensioner and have it fixed by a reputable bike shop?

[mutant_sheep]

actually at 1st i thought i wanna get it fix at micheal chong (kallang cycle, kallang). but due to not sure is what problem thats y i send it to HL, thought coz they can draw parts from store & send it back if problem is not coz by that parts.

 

im doing this thought of saving time & $$, end up spend more time for that & keep missing my babe.

 

think this time round learned a lesson from hardway, "always believe micheal chong better then HL"