Yamaha FJR1300

[SpEr]

Originally posted by Teamlm@Mar 26 2005, 02:13 PM

Any Fjr travelling up north to the Songkan water festival? I will be riding up with another FJR on the 11th April and back on the 13th April 2005. Let's form up riding buddy party if any one of you going there.

 

Take care.!

should be heading up on the 11th nite with a couple of bikes ...

[ashenZ]

Originally posted by Jerry7007@Mar 23 2005, 10:34 PM

Dear riders of this tread.... need some advise.....

 

Due to my recent accident.... my plans of changing to FJR have been brought forward.....

 

I been scouting ard...... and found.....

 

FY plate ( actually is FT) silver FJR at $17K with milage of 43K km at Looi's

 

FT plate Blue FJR at $15k with milage of 70K km at Mah motors

 

can advice me wat to check for when getting a 2nd hand FJR?

hey dude... there's an 04 model FJR for sale at New Southern... u might wana take a look.... they also have a silver '02 model there too....

[ashenZ]

juz came back from 2nd link... my god.... there's msia police stake-out near Gelang Patah.... in the middle of the nite~!!~ And they r using Civilian caR!!~!

 

So FJRians... pls keep in mind not to speed when near GP..... also to those who do illegal u-turn at GP exit.... seems fellow SBF bikers kena caught n fined before....

 

Apparently, learn from a fellow SBF biker dat there is a legal u-turn alternative further down, right after GP exit, which have some nice n smooth bends...

 

if onli i know it earlier.... dat route was not only legal but faster!

[omnislash]

Originally posted by ReBornBikeR@Mar 26 2005, 11:28 AM

What do you mean? You saw an "IDIOT" wearing your helmet on the road

Nah, the police caught him.. He rides a KR.. Thats all i know..

 

He was charged bout two weeks ago.. I'll get an official letter from the police once its settled. But my helmet was no longer in his house.. there were other helmets there but all quite lok kok.. Mine was sold as said by him...

 

Then who should i look for to claim my losses?

[iCyRavE]

Originally posted by ashenZ@Mar 21 2005, 10:05 PM

DO any 1 know where got sell FJR non-legal or legel full system exhaust pipe

eg: devil or other

[omnislash]

Originally posted by iCyRavE@Mar 27 2005, 01:15 PM

DO any 1 know where got sell FJR non-legal or legel full system exhaust pipe

eg: devil or other

Remus

 

Get it from motoworld.. $1800.. End can only.. Legal.. They tell me one..

[iCyRavE]

Originally posted by omnislash@Mar 27 2005, 04:11 PM

Remus

 

Get it from motoworld.. $1800.. End can only.. Legal.. They tell me one..

thanks i try go ask

[iCyRavE]

Originally posted by ashenZ@Mar 21 2005, 10:05 PM

Lets start a list for FJR accessories needed:

 

1.) Balancers - $30 (250grams/pcs) Motorworld / Motovation - $45 (330grams/pcs)

 

2.) Sliders - Non-drill $180 / Drill $60 +installation

 

3.) Headlight Protectors - Motorworld (1pcs) - $55 / Motivation (2 pcs) - $45

 

4.) Cruise Control - $48 (PMO)

 

5.) Front Mud Guard Extender - $50 Motovation (Needs 3-4wks pre-order) / Bike Tech has it / Motoworld stock coming in

 

6.) Tank Bra - $160 / Tank Bag - (?)

 

7.) Top box/Rack/bracket

 

8.) Wind Shield (bigger/wider) - Givi $180 (Chiap Lee) / Orginal Yamaha $280

 

9.) Handle Grip - BMW grip $23 (place?) / GPR (BMW lookalike) - $10 @ chiap lee/Looi's

 

10.) Left engine carbon fiber protector - $150 overseas, $150 motorworld(thinner version)

 

11.) Voltmeter (?)

 

12.) Rear Hugger (AUD$399 Excluding freight)

 

13.) Radiator Wire Meshing - $20

 

14.) Louder Horns - BMW $80 , Stebel Magnum $22 (autobacs)

wat is PMOCruise Control - $48 (PMO)

n where can i get the Radiator Wire Meshing - $20

[iCyRavE]

Originally posted by ashenZ@Mar 21 2005, 10:05 PM

Lets start a list for FJR accessories needed:

 

1.) Balancers - $30 (250grams/pcs) Motorworld / Motovation - $45 (330grams/pcs)

 

2.) Sliders - Non-drill $180 / Drill $60 +installation

 

3.) Headlight Protectors - Motorworld (1pcs) - $55 / Motivation (2 pcs) - $45

 

4.) Cruise Control - $48 (PMO)

 

5.) Front Mud Guard Extender - $50 Motovation (Needs 3-4wks pre-order) / Bike Tech has it / Motoworld stock coming in

 

6.) Tank Bra - $160 / Tank Bag - (?)

 

7.) Top box/Rack/bracket

 

8.) Wind Shield (bigger/wider) - Givi $180 (Chiap Lee) / Orginal Yamaha $280

 

9.) Handle Grip - BMW grip $23 (place?) / GPR (BMW lookalike) - $10 @ chiap lee/Looi's

 

10.) Left engine carbon fiber protector - $150 overseas, $150 motorworld(thinner version)

 

11.) Voltmeter (?)

 

12.) Rear Hugger (AUD$399 Excluding freight)

 

13.) Radiator Wire Meshing - $20

 

14.) Louder Horns - BMW $80 , Stebel Magnum $22 (autobacs)

wat is PMO Cruise Control - $48 (PMO)

N where can i find the Radiator Wire Meshing - $20 itz self fix???

[ashenZ]

Originally posted by iCyRavE@Mar 27 2005, 04:24 PM

wat is PMO Cruise Control - $48 (PMO)

N where can i find the Radiator Wire Meshing - $20 itz self fix???

PMO = Product mass order... therez a mass order thread for cruise control.. but the order is closed....

 

THe Radiator meshing u can do it @ KnT Accessories in Ubi... near Dili....

[ashenZ]

Wonder whoz the lucky fellow who bot the FJR from Southern......

 

Just the recent saturday saw the bike for sale... today itz sold liaoz...

 

FY plate Storm Silver FJR, 4mths old onli.... mint condition.... wonder whoz the lucky fellow...

[Pauche]

anyone in this forum or knows the guy riding a titanium grey FJR with 8118 plate? wanna ask u something leh....

[ashenZ]

Originally posted by Pauche@Mar 29 2005, 10:08 AM

anyone in this forum or knows the guy riding a titanium grey FJR with 8118 plate? wanna ask u something leh....

wOoO nice plate no~

[Pauche]

Originally posted by ashenZ@Mar 30 2005, 12:19 AM

wOoO nice plate no~

he's got a nice top box, very compact and slim one..... dunno what brand dunno where he get, if anyone sees that can post here? or best take pic of the box?

[omnislash]

Hey Ash,

 

The balancers that u got me is pretty good.. Except that the holes of the balancers are bit corroded.. Think cheap things come with a price... I tried my best to remove the rust and installed it wet.. Hopefully it wont corrode further.

 

Anyway, the balancer pushes the rite side grip too much.. So the throttle dun return fully when released. Think got to get spacers. The rest who got it from him got this problem? How did ur solve it?

 

Thanx again Ash.

[ashenZ]

Originally posted by omnislash@Mar 30 2005, 09:22 PM

Hey Ash,

 

The balancers that u got me is pretty good.. Except that the holes of the balancers are bit corroded.. Think cheap things come with a price... I tried my best to remove the rust and installed it wet.. Hopefully it wont corrode further.

 

Anyway, the balancer pushes the rite side grip too much.. So the throttle dun return fully when released. Think got to get spacers. The rest who got it from him got this problem? How did ur solve it?

 

Thanx again Ash.

Corroded?????

 

din realise it was.... so so sorry..... tink try spraying WD40 into the holes shud be okiee...

 

does it workz fine?? coz till now receive quite good feedback on it...

 

regarding the grip.... if u r using the orginal grip, the guyz cut off abit at the end..... if using BMW grips.. work juz fine~

[omnislash]

Originally posted by ashenZ@Mar 30 2005, 10:31 PM

Corroded?????

 

din realise it was.... so so sorry..... tink try spraying WD40 into the holes shud be okiee...

 

does it workz fine?? coz till now receive quite good feedback on it...

 

regarding the grip.... if u r using the orginal grip, the guyz cut off abit at the end..... if using BMW grips.. work juz fine~

Nah.. Its alright... I mean its really cheap and heavy...

 

Probably I'll get the BM grips like the rest... Eh.. Where to get them huh?

[ashenZ]

Originally posted by omnislash@Mar 30 2005, 10:38 PM

Nah.. Its alright... I mean its really cheap and heavy...

 

Probably I'll get the BM grips like the rest... Eh.. Where to get them huh?

can get it from M-technik.......

 

or can get the cheaper version BMW-lookalike grips @ looi's ....... refer to the accessories list for more info~ :smile~

 

got anymore lobang for frontmudguard extender?

[ashenZ]

Lets start a list for FJR accessories needed:

 

1.) Balancers - $30 (250grams/pcs) Motorworld / Motovation - $45 (330grams/pcs)

 

2.) Sliders - Non-drill $180 w/o installation (Motovation) / Drill $60 +installation (moz bike shops)

 

3.) Headlight Protectors - Motorworld (Ventura-1pcs) - $55 / Motovation (Contour-2 pcs) - $45

 

4.) Cruise Control - Vista $48 (PMO)

 

5.) Front Mud Guard Extender - $50 Motovation (Needs 3-4wks pre-order) / Bike Tech has it / Motoworld stock coming in

 

6.) Bagster Tank Bra - $160 / Tank Bag - $150 (From Motoworld)

 

7.) Top box/Rack/bracket

 

8.) Wind Shield (bigger/wider) - Givi $180 (Chiap Lee) / Orginal Yamaha $280

 

9.) Handle Grip - BMW grip $23 (place?) / GPR (BMW lookalike) - $10 @ Looi's / Harris (Bmw lookalike-better Quality) $18 @ Chiap lee's

 

10.) Left engine carbon fiber protector - CREATIONS $170 overseas (Motovation) / $150 motorworld(thinner version)

 

11.) Voltmeter - $30 - $55 (where to install??)

 

12.) Rear Hugger (AUD$399 Excluding freight)

 

13.) Radiator Wire Meshing - $20 (KnT @ Ubi/ Southern @ B.Merah)

 

14.) Louder Horns - BMW Hella $40 (Southern Motors) , Stebel Magnum $22 (Autobacs)

[ashenZ]

Where have all the FJRians gone.........

[hunkiedave]

HI I HAVE a used K&N airfilter for sale .. $60 done abt 8000km and a used ventura lens cover for $ 30bucks. pls sms me at 98535487.if u r interested .

[ashenZ]

anyone using bagster tank bags around here..

 

any reccomended size to get??

[scooterer]

FJR Accessories For Sale

 

update: link to back protector fixed.

 

1.) New Item: Bagster Tank Bra for FJR, grey color to suit the silver storm model. $80.

 

2.) FJR sized kam por (4XL)- new, got free from Loois, retail $40 selling $30.

 

3.) Sliders - Non-drill Motorvation- New and Sealed $150

 

4.) Cruise Control -Never Installed- Vista Cruise $40

 

5.) Hepco and Becker Top box+ Rack + all screws needed- Whole set going for $300. Box condition is ard (7/10), but you can replace the box if you want.

 

6.) Wind Shield MRA 2 Piece for touring bikes, with height extender, Tinted $140, previously mounted on FJR.

 

7.) FJR CORBIN SEAT, Used, in good condition, Only one in Singapore! The Ultimate in Touring Comfort on your FJR! $450

http://www.corbin.com/yamaha/yfjr13.shtml

 

NOT FJR SPECIFIC

 

7.) Icon Timax Mesh Jacket, Size L. Used about 3 times. Has 3 Titanium plates, blue in color, special import, cannot get in Singapore. $200. Cost me US $215+ shipping

http://www.motorhelmets.net/pics-general/i...imax-jacket.jpg

 

8.) Teknic 7 plate back protector, brand new, never used $80.

http://www.newenough.com/armor_teknic_seve...tector_page.htm

 

SMS me 91011316 to deal. I will deliver and install for the box and rack and Corbin Seat. Everything Else Self Collect in Jurong or Hougang. May deliver if you buy a few items.

[bakgua]

Hi FJRians,

 

Saw a fjr1300 bearing the number plate FS 30 S parking at Looi`s... anyone know who is the owner of the biker?? Just wanna know the condition of the bike as in izzit accident free or any problems with the bike... Cos if i ask Mr Lee at Looi's Motor...they sure say nothing wrong. Just hope to obtain as much info as possible on that bike if u guys happen to have any informations for me...thanks

[Pauche]

Originally posted by bakgua@Apr 9 2005, 05:51 AM

Hi FJRians,

 

Saw a fjr1300 bearing the number plate FS 30 S parking at Looi`s... anyone know who is the owner of the biker?? Just wanna know the condition of the bike as in izzit accident free or any problems with the bike... Cos if i ask Mr Lee at Looi's Motor...they sure say nothing wrong. Just hope to obtain as much info as possible on that bike if u guys happen to have any informations for me...thanks

it belongs to an uncle rider who has been to many long trips...