Common Mechanical Issues On Cubs

[boardrider02]

When you change youre front sprocket in JB or aywhere,make sure u change to the correct configration.If the front sprocket is too small,you sprocket lock cannot be fixed.Some will put washer or just a circlip which will make your sprocket not seated properly.In the long run,as you sprocket vibrate, it will cause you crankshaft to vibrate..in the end you have major problem like me.

[pyro13]

o ok..erm..wat are the sizes to go wit??

 

like if behinf 38 teeth..front must be how much??

 

any formula to calculate it out

[boardrider02]

not that i know of bro.but i know there is but no formula.

[Cyanide14]

Do JB's motortiam sell branded sprockets cheaper than in Spore?

Provided they sell genuine stuffs...

[boardrider02]

What do u mean branded sprocket?for me branded should be original sprocket. But definitely it will be cheaper than in Singapore. But if you ride small bike, JB would be a cheaper alternative. Those racer get their stuff in JB shops, so it must be a reasonable quality.

[thrasher]

how small can your front sprocket be? 14, 15, 16. these are 3 most common used ones.

[gunshead]

thank you for this info

 

i will take care of the sprocket

 

mine suzuki also the same

previous owner did in Simei

 

the mechanic modified the cliper /washer

[Cyanide14]

like for example DID sprockets and chains?

[gunshead]

boardrider02 ,

 

what bike u experience caused this problem ?

 

how about yamaha spark z 110cc or suzuki raider 150cc ?

 

this is must be a serious consideration during changing sprockets and chain