CBR150R Riders, Join us now!

[ah fat]

Originally posted by kahhwee@Jun 6 2006, 11:27 AM

Wah. so expensive. I think rebleed and change the fluild is 20 bucks nia. then service the caliper also not so ex ley.

went to another frens shop. change brake fluid and spark plug. found out is the brake pump jammed. so they just service the rear pump only. total 42bucks.. not bad. the 1st shop still tell me if jammed muz change the whole pump. :mad:

crazy.

[kahhwee]

yeah. brake pump is 42 bucks. I also change mine for that amount.

[ah fat]

Originally posted by kahhwee@Jun 7 2006, 07:03 PM

yeah. brake pump is 42 bucks. I also change mine for that amount.

nono. i din change. just service and change brake fluid and change my spark plug. din change the whole pump. ha

[miss]

Originally posted by ah fat@Jun 7 2006, 08:50 PM

nono. i din change. just service and change brake fluid and change my spark plug. din change the whole pump. ha

Wad plug are u using?

 

I'm heading down to LAB tmr to change my tyres... Anyone knows how much it'd cost for sure?

If i remembered correctly, they quoted me $138 for BT39.

 

Almost had accident just now.

Thank god for safe following distance.. It was a looonnngg tyre screech...

[kahhwee]

Originally posted by miss@Jun 8 2006, 01:11 AM

Wad plug are u using?

 

I'm heading down to LAB tmr to change my tyres... Anyone knows how much it'd cost for sure?

If i remembered correctly, they quoted me $138 for BT39.

 

Almost had accident just now.

Thank god for safe following distance.. It was a looonnngg tyre screech...

138 + install or not? if never + install fee i recommand u go HKL at bukit merah lane. i change for 160 there. ah boy that side the people install tires damm long one. Last time i go with friend. 3 damm hours.

[kahhwee]

Originally posted by ah fat@Jun 7 2006, 08:50 PM

nono. i din change. just service and change brake fluid and change my spark plug. din change the whole pump. ha

u change to wad plug? last time my stock one used to be denso then i change to NGK .

[ah fat]

Originally posted by kahhwee@Jun 8 2006, 10:09 AM

u change to wad plug? last time my stock one used to be denso then i change to NGK .

i change to ngk platinum lor. the same one ozzar use b4 passing to me. ha.. my plug was burnt when they take it out lor. ha. change le feel difference immediately. pick up much faster than b4. ha. but think the brake fluid not tat gd. cos now must depress the brake more than b4 to get the effect. ha. eh. anyway hkl at bukit merah very popular? keep seeing posts bout them. always see them post ads in classified. ha

[ellamcoy]

Originally posted by miss@Jun 8 2006, 01:11 AM

Almost had accident just now.

Thank god for safe following distance.. It was a looonnngg tyre screech...

Glade that u are okay

I will choose to pump cheap petrol but never save on good rubber.

[boy_genius]

Hey guyz... I was already about to go buy my cbr 150 juz now...

Unfortunately, i had problems waking up my dad who wanted to become the

1st rider, saying its much cheaper to do that and add me as a 2nd rider,

instead of making me the 1st rider, coz i'm still 19.... And it will cost quite a bit

 

So, the thing i'm wondering about, is whether i can juz bring my dad's ic and license to add him as a main rider, without him being there.. Coz i kinda got pissed off juz now..

 

All that hope... Down the drain

I'm going to malaysia tmrw with the whole family, so need to wait till mon..

So close, yet so FAR!!!

Haiz...

[ah fat]

Originally posted by boy_genius@Jun 8 2006, 08:19 PM

Hey guyz... I was already about to go buy my cbr 150 juz now...

Unfortunately, i had problems waking up my dad who wanted to become the

1st rider, saying its much cheaper to do that and add me as a 2nd rider,

instead of making me the 1st rider, coz i'm still 19.... And it will cost quite a bit

 

So, the thing i'm wondering about, is whether i can juz bring my dad's ic and license to add him as a main rider, without him being there.. Coz i kinda got pissed off juz now..

 

All that hope... Down the drain

I'm going to malaysia tmrw with the whole family, so need to wait till mon..

So close, yet so FAR!!!

Haiz...

tell your dad it makes not difference who is the first rider now. insurance turn smart last year and calculate the insurance by the youngest and rider which will cause it to be the most expensive. ha. so its no difference if you or him is the 1st rider. anyway go mitsui insurance. heard its cheaper.

[ah fat]

anyway saw a 3m adhesive remover in diyfix shop today. but better check here first. got any side effects? like will remove paint or what. ha. saw you guys chatting about it before rite? ha. i want to remove my stickers on the back. start peeling liao and so untidy. but removal got the sticky dark patches on it left over.

[miss]

I changed my tyres.

 

Feeling worried, i went to check pressure.. and pump 30 front and 32 rear. Imagine my surprise when the meter read 40++ front and 60++ rear.

 

My question is... Did i do the right thing in adjusting to 30 and 32 or should i leave it at the original 40+/60+ pressure because they are new? Even a car's spare tyre in the boot is only 40++.

 

Btw, this new one rocks!! can feel difference immediately!

[miss]

Originally posted by ah fat@Jun 8 2006, 10:29 PM

anyway saw a 3m adhesive remover in diyfix shop today. but better check here first. got any side effects? like will remove paint or what. ha. saw you guys chatting about it before rite? ha. i want to remove my stickers on the back. start peeling liao and so untidy. but removal got the sticky dark patches on it left over.

If you do ever try it, let us know the outcome ya!

 

I'm itching to stick some stickers onto the body..but afraid might leave marks...

[Roadrunner71]

Originally posted by boy_genius@Jun 8 2006, 08:19 PM

Hey guyz... I was already about to go buy my cbr 150 juz now...

Unfortunately, i had problems waking up my dad who wanted to become the

1st rider, saying its much cheaper to do that and add me as a 2nd rider,

instead of making me the 1st rider, coz i'm still 19.... And it will cost quite a bit

 

So, the thing i'm wondering about, is whether i can juz bring my dad's ic and license to add him as a main rider, without him being there.. Coz i kinda got pissed off juz now..

 

All that hope... Down the drain

I'm going to malaysia tmrw with the whole family, so need to wait till mon..

So close, yet so FAR!!!

Haiz...

boy_genius,

 

Which motordiam do u intend to buy ur CBR150 from? How much they quoted u? What's included for that price?

[Roadrunner71]

Originally posted by miss@Jun 9 2006, 05:11 AM

I changed my tyres.

Miss,

 

What tyres did u get? Bridgestone Battlax BT39? What tyre dimensions? From where? How much? Price inclusive of installation? How long did they take to change for u?

[Roadrunner71]

Guys, where do u put the IU on ur CBR150? From what I've seen, mostly on the handlebar, rite? But problem is it blocks rider's view of the display meters. I've also seen IUs installed on the CBR150's fuel tank, just in front of the inlet. Sigh..... I suppose wherever u put it, the CBR150 looks ugly with an IU.

 

By the way, what are the dimensions of the fattest tyres (front and rear) that can fit into the stock rims of the CBR150?

[miss]

Originally posted by Roadrunner71@Jun 9 2006, 11:05 AM

Miss,

 

What tyres did u get? Bridgestone Battlax BT39? What tyre dimensions? From where? How much? Price inclusive of installation? How long did they take to change for u?

Yes. BT39. $140 with installation at ah-boy. Installation was done within the hr.. Though had to wait for a while because another bike being serviced at the workshop.

 

ahboy said if new stock might be cheaper..but i cldnt wait..2 near accidents couldn't make me wait another week...

 

Dimensions are 90/80 and 100/70.

[kahhwee]

Originally posted by ah fat@Jun 8 2006, 11:33 AM

i change to ngk platinum lor. the same one ozzar use b4 passing to me. ha.. my plug was burnt when they take it out lor. ha. change le feel difference immediately. pick up much faster than b4. ha. but think the brake fluid not tat gd. cos now must depress the brake more than b4 to get the effect. ha. eh. anyway hkl at bukit merah very popular? keep seeing posts bout them. always see them post ads in classified. ha

I can say that they are quite gd la. Not bad in terms of service. my plug is also burnt when take out.

[kahhwee]

Originally posted by boy_genius@Jun 8 2006, 08:19 PM

Hey guyz... I was already about to go buy my cbr 150 juz now...

Unfortunately, i had problems waking up my dad who wanted to become the

1st rider, saying its much cheaper to do that and add me as a 2nd rider,

instead of making me the 1st rider, coz i'm still 19.... And it will cost quite a bit

 

So, the thing i'm wondering about, is whether i can juz bring my dad's ic and license to add him as a main rider, without him being there.. Coz i kinda got pissed off juz now..

 

All that hope... Down the drain

I'm going to malaysia tmrw with the whole family, so need to wait till mon..

So close, yet so FAR!!!

Haiz...

Hmm. Nowadays, insurence will take the youngest age. No different who is the owner. I would suggest u be the owner as sometime things like fines will be forward to ya house as your name. Nvm la. monday then go buy lor. If still want ya dad to be the owner, u just bring his driving lisence then can already.

[ah fat]

Originally posted by kahhwee@Jun 9 2006, 05:48 PM

I can say that they are quite gd la. Not bad in terms of service. my plug is also burnt when take out.

ha.. so we muz change earlier than 5km i think. ha. but i initially tot changing the spark plug wil make my bike go back to the normal 7k rpm hit 100km/hr. but it din lehz. still gg on 7.5k rpm for 100km/hr. tot is i use over time than the spark plug dying so taking more rpm for the speed. ha.

 

anyway i think i gg to try washing with soap can remove not. if not than i go try the 3m adhesive remover. ha.

[Aman47]

Originally posted by Roadrunner71@Jun 9 2006, 11:22 AM

Guys, where do u put the IU on ur CBR150? From what I've seen, mostly on the handlebar, rite? But problem is it blocks rider's view of the display meters. I've also seen IUs installed on the CBR150's fuel tank, just in front of the inlet. Sigh..... I suppose wherever u put it, the CBR150 looks ugly with an IU.

 

By the way, what are the dimensions of the fattest tyres (front and rear) that can fit into the stock rims of the CBR150?

hmm.. i mount my IU on top of my left ferring. i got post some pics on the previous threads on how i mount my IU.. can take a look..

 

http://www.singaporebikes.com/forum/index....0entry2969540

[Aman47]

erm, anyone noe wats the ideal pressure to pump air in Dunlop TT900 tyres, front n back?

 

i see tt shell uses pressure like "28,29,30+++" while esso uses pressure like "200,210,220+++" .. confusing seh.. so anyone noe the pressure pumping tt900 tyres in shell n esso, front n back tyres?

 

tanx

[ah fat]

Originally posted by Aman47@Jun 10 2006, 12:09 AM

erm, anyone noe wats the ideal pressure to pump air in Dunlop TT900 tyres, front n back?

 

i see tt shell uses pressure like "28,29,30+++" while esso uses pressure like "200,210,220+++" .. confusing seh.. so anyone noe the pressure pumping tt900 tyres in shell n esso, front n back tyres?

 

tanx

hmm.. if we toking bout the same thing... u mean the different measurements of the pressure used by shell and esso ar? actuali shell one can change to kPa also. juz press one button there to choose which of the 3 kinds of measurements u wan. hope this helps.

[Aman47]

Originally posted by ah fat@Jun 10 2006, 02:33 AM

hmm.. if we toking bout the same thing... u mean the different measurements of the pressure used by shell and esso ar? actuali shell one can change to kPa also. juz press one button there to choose which of the 3 kinds of measurements u wan. hope this helps.

hmm. tanx.. will check it out later.. but im still unsure on the pressure needed to pump into my dunlop tt900 tyres.. any help anyone?

[kahhwee]

Originally posted by Aman47@Jun 10 2006, 12:09 AM

erm, anyone noe wats the ideal pressure to pump air in Dunlop TT900 tyres, front n back?

 

i see tt shell uses pressure like "28,29,30+++" while esso uses pressure like "200,210,220+++" .. confusing seh.. so anyone noe the pressure pumping tt900 tyres in shell n esso, front n back tyres?

 

tanx

Hmm. Wads the size or ya tires? On the tyres wall got recommand pump value one.