All about Steed

[xavez]

Just a small tip for anyone interested in relocation IU: Go to Autobacs and buy a L-bar for $4. Then remove speedo, and mount it offset, leaving the other side for the IU. Note that the L-bar holes are too big for the IU screws, but 2 washers with large OD (outer diameter) solves the problem.

 

[ylsonny]

Anyone with spare Steed side cover or know where selling them please tell me. Thanks.

 

Right-side cover, covering the rectifier i think..

[xavez]

Try Chong Aik. They have parts for our old bike listed in their 2011 catalogue

 

http://www.chongaik.com.sg/outlets

[ylsonny]

Try Chong Aik. They have parts for our old bike listed in their 2011 catalogue

 

http://www.chongaik.com.sg/outlets

 

thanks alot

[Bardamuz]

Just a small tip for anyone interested in relocation IU: Go to Autobacs and buy a L-bar for $4. Then remove speedo, and mount it offset, leaving the other side for the IU. Note that the L-bar holes are too big for the IU screws, but 2 washers with large OD (outer diameter) solves the problem.

 

[ATTACH=CONFIG]258335[/ATTACH]

 

Nice Steed dude , where did you mod it ??

[ylsonny]

by the way are there any new steed in the market ?

[Fire Phoenix 553]

Dear all, me and brother are looking for 3 stock steed altogether. We are not fussy buyer as we will be doing a major project on all 3. If u have or know of any bike shop, kindly refer us through PM. Thk u all, cheers!!!

[Hydher]

Just a small tip for anyone interested in relocation IU: Go to Autobacs and buy a L-bar for $4. Then remove speedo, and mount it offset, leaving the other side for the IU. Note that the L-bar holes are too big for the IU screws, but 2 washers with large OD (outer diameter) solves the problem.

 

[ATTACH=CONFIG]258335[/ATTACH]

 

Sweet!!!!!

 

APEAPEAPEAPE $120 @ FIRST MOTORS:cheeky:

[bikerboy]

Collecting my steed today but the problem is it doesn't have a back rest / sissy bar . Any one can has spare that you can sell it to me? Or any suggestion on the shops that sell them?

[xavez]

Nice Steed dude , where did you mod it ??

 

Thanks! The handle bars and racing stripes were done by Hydher so you gotta ask him where. As for grips, headlights, mirrors and speedo/IU relocation, did them myself at the void deck.

 

Sweet!!!!!

 

APEAPEAPEAPE $120 @ FIRST MOTORS:cheeky:

 

Ahaha don't poison me the drag bars are growing on me it's very easy to squeeze through traffic. I'm thinking of getting riser extensions. And then forward controls.

[xavez]

Dear all, me and brother are looking for 3 stock steed altogether. We are not fussy buyer as we will be doing a major project on all 3. If u have or know of any bike shop, kindly refer us through PM. Thk u all, cheers!!!

 

Saw a few cruiser bikes at First Motor

 

3006 Ubi Road 1

#01-398 S408700

 

Tel: 67431911

 

Collecting my steed today but the problem is it doesn't have a back rest / sissy bar . Any one can has spare that you can sell it to me? Or any suggestion on the shops that sell them?

 

Chong Aik. See my post in the previous page

[Bardamuz]

Thanks! The handle bars and racing stripes were done by Hydher so you gotta ask him where. As for grips, headlights, mirrors and speedo/IU relocation, did them myself at the void deck.

 

 

 

Ahaha don't poison me the drag bars are growing on me it's very easy to squeeze through traffic. I'm thinking of getting riser extensions. And then forward controls.

 

you also change your tank right ? or is the picture angle

[bikerboy]

Thanks xavez, checked chong aik, they don't have any for 400VSE (mine), so still looking:cry:

[Bardamuz]

Hi guys after trying several try , currently we haven't found the wheel i want , especially because i want rear disc (Yeah i am stubborn) so have a lot of chance i will give up this base and probably resell it , pity is surely one of the last Springler (VLS) one owner , but last week-end during the event i see a good base catch my eye, for this one (if i go on that way) we will start from a 100% new bike (english one) ... i will keep you update soon , if one of you have a good project let me know i will think if i resell the bike or keep it for occasionally use, or made a simpler Bobber

Edited October 4, 2012 by Bardamuz

[OlieLove]

bros. my bike leaking ah. oil coming out from the block . how ah? if repair how much? which shop do good?

[xavez]

you also change your tank right ? or is the picture angle

 

Hmm I have removed the tank before and the mounts look stock so I think it's just the picture angle.

 

bros. my bike leaking ah. oil coming out from the block . how ah? if repair how much? which shop do good?

 

Most probably head gasket gone alr. I've never had that changed before so I don't know the price. 3 places I recommend: Planet, First Motor, Rosli (RS Bikes). I advice you to quickly get it done or make sure you top up engine oil every now and then.

[xavez]

Hi guys after trying several try , currently we haven't found the wheel i want , especially because i want rear disc (Yeah i am stubborn) so have a lot of chance i will give up this base and probably resell it , pity is surely one of the last Springler (VLS) one owner , but last week-end during the event i see a good base catch my eye, for this one (if i go on that way) we will start from a 100% new bike (english one) ... i will keep you update soon , if one of you have a good project let me know i will think if i resell the bike or keep it for occasionally use, or made a simpler Bobber

 

Considered removing the rear swing arm and custom make one to fit the wheel of your choice?

[OlieLove]

rosli at where?

[xavez]

rosli at where?

 

Autobay, Khaki Bukit Ave 6 #02-45. If you're going there help me ask the price of checking valve clearance and how long it would take. Thanks.

 

I got new mirrors! And figured out that the aftermarket air box cover I bought from Cruiser Customizing is actually an add on instead of a replacement part! That means just assemble on top of the stock cover.

 

 

Next up: forward controls

[OlieLove]

oh ok cool.will check for you. will not be going so soon liao. prolly this weekend

[Bardamuz]

Considered removing the rear swing arm and custom make one to fit the wheel of your choice?

it's little more complicated than this , coz i want a bobber like the Zero engineering mean low, longer and 2 wheel same size and 16", is not that much complicated it's mainly the fact i also want a rear disc , open the rear swin arm is really a piece of cake , one of the problem (have many) is we don't arrive to find the rim in chromed iron , go with a alloy rim is not a way i want as that will destroy the global look , yet we have not give up . But in same time i seriously look to buy a 350 RE and made an other type of bike ...

 

Keep you update soon.

[xavez]

Go extreme! Swap the stock primary reducer and gearbox for custom ones. Then you can have the chain at any position, left or right.

 

Is there anyone in Singapore that has done it before?

 

 

Your project sounds exciting

Edited October 9, 2012 by xavez

[OlieLove]

bros. anyone knows of any shops that close till late. better still, 24hrs? my steed happen to always give problem after 11pm. haha.

[old]

anyone know where to get speedometer for vlx?

[wrshao]

anyone know where to get speedometer for vlx?

 

You are looking for aftermarket or stock speedo?