GILERA runner VXR 200 workshop

[ktm_edmund]

help pls.....gonna go mustafa today to buy it...any kind soul?

[ninja86]

anyone? please?

[Partimer]

Hi, I'm a new RST runner rider. My bike got problem after buying for 3days only. Any good workshop to recommend near Bukit Panjang? I scare to ride all the way to kallang.

 

Problem: When moving off, got some knocking sound at the left rear of the bike and the bike sometime got power, sometime dun have. If manage speed, not much problem but when pickup speed or moving off the will lose power.

[Acer1337]

Most probably is clutch slipping. It is normal for autoscoot but don't neglect it. Since yours is RST, I assume you bought it second hand. Therefore, please check with the previous owner or shop when was the last time your bike full serviced.

[Partimer]

Thanks Acer... Yes, I'm the 2nd owner. He say he never had this problem before and he also never had full servicing before. *faint.

 

BTW, is there any workshop in the west for runner? ASPoon? Heng Motor?

[Acer1337]

I'm not sure of any shops specialising in scooters in the west area. Most Runner owners service their bikes at shops at Kallang Bahru (Future Scootering, Sunrise Eurobike, Tai Hin). There's another at Eunos Industrial called Mach Speed Motors. And one more shop, Wonderful Motors, located at Macpherson but I've never been there before so I don't know the exact location. Heard many good comments about that shop.

[Partimer]

Ya but I scare I no life to ride until there. LOL...

[sheep]

Who dug up this old thread?

[Partimer]

me... I tried search thru the forum but cannot find any recommended workshop for runner in the west... So post on here and ask lor.

[revvalon]

the front brakes on my runner are not working very well.. rear brakes tend to be more bitey, which is kinda weird.. can anyone give me some advice as to what i should do?

 

1. change to steel braided lines? which brand?

2. change pads? what brand/model is the grippiest?

3. change to braking rotors?

4. re-bleed brake lines

 

Rough gauge of prices and where to do would be good as well.

 

Thanks much.

[Sâundless]

Change to steel braided hose first. You will feel the different.

[romeo69]

http://www.gileraspareparts.co.uk/sparesGilera/news/runnerspeedomph.html

 

this shows how to change it to mph. i tink if u do the same it will change back to kph..

[Dafanshu]

H8 12v..........

[Nekwang]

My gilera vxr have a BIG! problem. when on the road the engine die. start again then die. Finally after 5mins (rest) I can start but I have to wait for 10mins to warm it up then go but only can go as far as 1km then the engine die again!

 

When to shop they say nothing wrong?

 

What they have check:

1) Petrol tank - No Water In it!

2) Spark plug - Ok! Gd Condition!

 

Any ideas what when wrong!?

 

Please help me out if you have ever face this problem before?

Or any other things to look out for?

 

Thank you

[kaciputan]

The problems seems similar to mine last time, they did the thorough check and find out it was my CDI.The mechanic says it is rare for the CDI to spoil but after he change it , all good !!! hOpe it helps fren!! ...

[Nekwang]

Thanks Bro!

[born]

Go workshop check your carb.... wash ur carb.... maybe it will help. =)

[Nekwang]

Carb is new? Just change............could'nt be right?

[ganzstar]

My gilera vxr have a BIG! problem. when on the road the engine die. start again then die. Finally after 5mins (rest) I can start but I have to wait for 10mins to warm it up then go but only can go as far as 1km then the engine die again!

 

When to shop they say nothing wrong?

 

What they have check:

1) Petrol tank - No Water In it!

2) Spark plug - Ok! Gd Condition!

 

Any ideas what when wrong!?

 

Please help me out if you have ever face this problem before?

Or any other things to look out for?

 

Thank you

 

wat model u bike?

[revvalon]

any other advice? thks

[Nekwang]

Vxr 05... the mechanic say nutin wrong eh!

 

haizzzzzzzzzzzzzzzzzzzzz

 

today 2nd day already i ride onli for 2km the bike engine dies again!

[adidasler]

mite be ur cdi / rectifier / coil? there is no power going thru ur bike. . . can ride for awhile den die. . . meaning power not being charged and die off. . . tts y when u wait den got abit of power. . . when no power, there will be no spark at the plug. . . i mite be wrong thou. . . jus a guess. . .u can try going to any bike shop and ask them to charge ur batt. . . if ur bike can run for at least a few hrs den sumting is wrong with the above mentioned parts. . .

[Wan_Saint]

Eloooo....guys and gals if any,

 

Unable to start my bike, VXR200, after 3 or 4 days never start. Not even cranking sound. I tried a few stuff to revive my bike. Firstly I find out my batt is totally drain off. So I brought the batt to motor shop to charge. Then I try again on my bike...still unable to start or even crank. I even try to jump start my bike and also unable to crank at all.....Then I try changing my spark plug...still to no avail....

 

Hmmm.....I'm at lost....Any of u all encounter dis b4??? Can it be the coil or rectifier??? Need your advice....

[Z3U5]

why dont you guys simply go into the gilera threads an ask all this noob questions or simply read the pages there are so many info there or you can simply post your questions there and i guarantee you will be able to get an answer faster rather than simply opening up another thread.

[Z3U5]

why dont you guys simply go into the gilera threads an ask all this noob questions or simply read the pages there are so many info there or you can simply post your questions there and i guarantee you will be able to get an answer faster rather than simply opening up another thread....