[Group] SBF Yamaha X-1r 135

[badTz]

anyone sick of racing footrest and wanna get back a stock one? contact me!! loL!! Thank you..~~

 

good luck on your yoshi..~~

[GrandmasteR]

hey guys, for x1R, what kind of chain is it? is it an O-ring chain?

 

next qs, what do guys use to clean the chain? and how often?

 

next qs, after cleaning the chain, what kind of chain lube do you guys use to lubricate?

 

pls help, thanks!

[Hamster_l33]

anyone wts yoshi exhaust for x1r or racing boy rims 8 spoke white?? text me at 97321216 thankx

[savo]

hahaha mayb when u get your bike istill have ma =]

preparing to get my yoshi soon but need to save up more cash first.

 

hahaha yayness just got my bike yesterday. feels different from a 125z. anyways wanna ask what does the mechanic actually does when he downforks an x1r...is downforking a reversible process?

[badTz]

hahaha yayness just got my bike yesterday. feels different from a 125z. anyways wanna ask what does the mechanic actually does when he downforks an x1r...is downforking a reversible process?

 

what you mean by is downforking a reversible process? ???

[Kuyo]

hahaha yayness just got my bike yesterday. feels different from a 125z. anyways wanna ask what does the mechanic actually does when he downforks an x1r...is downforking a reversible process?

 

i tink u meant by after down forking still can adjust back to original standard or not right?

i guess its possible cause its just adjusting the fork to be lower thats all

[Blahhh]

hahaha yayness just got my bike yesterday. feels different from a 125z. anyways wanna ask what does the mechanic actually does when he downforks an x1r...is downforking a reversible process?

 

Yes... its merely just "sliding" the fork down the fork brace thingy. Anyway, don't down too much. The previous owner of my X1R down it too far, it looked very nice but when you run over a hump.. GG. Don't know what he was thinking. Just down it one inch down from standard.. gives you the freedom of clearance + corner stability..

 

hey guys, for x1R, what kind of chain is it? is it an O-ring chain?

 

next qs, what do guys use to clean the chain? and how often?

 

next qs, after cleaning the chain, what kind of chain lube do you guys use to lubricate?

 

pls help, thanks!

 

O-ring or X-ring depends on what chains ur using, not on the bike. But normally I am guessing ur x1r is on o-ring la..

 

To clean the chain, you can just old EO (i used to even use 2t on my krr) wipe it across the chain slowly. Then rinse off. You can also use a degeaser, just spray and the dirt will come off by themselves then rinse off.

 

For chain lube, buy a good one. I used to use maxima chainlube from mustafa centre. Now using belray chain lube. Both of them are good..

 

hi guys, know any bike shop near woodlands where i can get myself a pair of clutch+brake levers?

 

wdlands not alot of motorbike shops.. can come down to yishun industrial. Go to "tune-in motors", theres a small showroom there with lots of stuff. The boss frequents thailand alot, so u get to see lots of rare stuff there

 

like wasted lidat sia.. gonna change to 2A soon dunno wanna get that yoshi for x1r or not

 

If upgrade to 2a, don't waste your money on x1r's yoshi lah. Save the money for a delta if u wanna ride a DRZ or a yoshi firespec if your want to ride an inline 4 bike

[Romi_ku]

Yes... its merely just "sliding" the fork down the fork brace thingy. Anyway, don't down too much. The previous owner of my X1R down it too far, it looked very nice but when you run over a hump.. GG. Don't know what he was thinking. Just down it one inch down from standard.. gives you the freedom of clearance + corner stability..

 

 

 

O-ring or X-ring depends on what chains ur using, not on the bike. But normally I am guessing ur x1r is on o-ring la..

 

To clean the chain, you can just old EO (i used to even use 2t on my krr) wipe it across the chain slowly. Then rinse off. You can also use a degeaser, just spray and the dirt will come off by themselves then rinse off.

 

For chain lube, buy a good one. I used to use maxima chainlube from mustafa centre. Now using belray chain lube. Both of them are good..

 

good info there:thumb: wondering if can down fork and put fork brace, does it make any sense?

[GrandmasteR]

O-ring or X-ring depends on what chains ur using, not on the bike. But normally I am guessing ur x1r is on o-ring la..

 

To clean the chain, you can just old EO (i used to even use 2t on my krr) wipe it across the chain slowly. Then rinse off. You can also use a degeaser, just spray and the dirt will come off by themselves then rinse off.

 

For chain lube, buy a good one. I used to use maxima chainlube from mustafa centre. Now using belray chain lube. Both of them are good..

 

I read in other parts of this forum, some ppl suggest to clean the chain with diesel/kerosene, and then spray chain lube on a warm chain (some suggesting motorex chain lube from mah motosports) and leave it to stay for the night. But I'm not sure whther it is for X1-r too.

 

Anw, thanks man for the info

[Kuyo]

Yes... its merely just "sliding" the fork down the fork brace thingy. Anyway, don't down too much. The previous owner of my X1R down it too far, it looked very nice but when you run over a hump.. GG. Don't know what he was thinking. Just down it one inch down from standard.. gives you the freedom of clearance + corner stability..

 

 

 

O-ring or X-ring depends on what chains ur using, not on the bike. But normally I am guessing ur x1r is on o-ring la..

 

To clean the chain, you can just old EO (i used to even use 2t on my krr) wipe it across the chain slowly. Then rinse off. You can also use a degeaser, just spray and the dirt will come off by themselves then rinse off.

 

For chain lube, buy a good one. I used to use maxima chainlube from mustafa centre. Now using belray chain lube. Both of them are good..

 

 

 

wdlands not alot of motorbike shops.. can come down to yishun industrial. Go to "tune-in motors", theres a small showroom there with lots of stuff. The boss frequents thailand alot, so u get to see lots of rare stuff there

 

 

 

If upgrade to 2a, don't waste your money on x1r's yoshi lah. Save the money for a delta if u wanna ride a DRZ or a yoshi firespec if your want to ride an inline 4 bike

 

my fork down to the max hit hump like said gg hahaha.

but the looks nicer

hmmm i everytime bring to bike shop lube chain sia thats why i dont know

how to do it -.- they just help me tighten than spray some oil over the chain

dont know correct oil or not, they tell me cooking oil also can use ?

than also, any way to after oil -ing the chain got anything can use to prevent the bloody oil

from splashing onto the rims ma ? mine white rims oil 3 times all 3 times dirty

damn sian, infront clean rear wheels dirty.

[savo]

my fork down to the max hit hump like said gg hahaha.

but the looks nicer

hmmm i everytime bring to bike shop lube chain sia thats why i dont know

how to do it -.- they just help me tighten than spray some oil over the chain

dont know correct oil or not, they tell me cooking oil also can use ?

than also, any way to after oil -ing the chain got anything can use to prevent the bloody oil

from splashing onto the rims ma ? mine white rims oil 3 times all 3 times dirty

damn sian, infront clean rear wheels dirty.

 

 

hahaha no real way to prevent the oil from splashing on the rims...the best preventive measure is to not put excessive lube on your chain..

 

was wondering about the down fork thing cause when i down forked my 125z previously the shop used this drill and sort of made the fork brace hole bigger and pushed the entire fork up to downfork...does this apply for x1r too?

[Kuyo]

hahaha no real way to prevent the oil from splashing on the rims...the best preventive measure is to not put excessive lube on your chain..

 

was wondering about the down fork thing cause when i down forked my 125z previously the shop used this drill and sort of made the fork brace hole bigger and pushed the entire fork up to downfork...does this apply for x1r too?

 

thinking of spraying my rims to black to counter it

err for my fork also same got drill abit to push it down .

[savo]

so which means after drilling...its not possible to revert to how it was?

[eRr0r]

thinking of spraying my rims to black to counter it

err for my fork also same got drill abit to push it down .

 

eh koyote are you using racing boy 8 spoke sport rim, white with chrome sides?

 

i am using racing boy 8 spoke sport rim, black. haha kinda regret not taking the white one.

 

maybe if u wan trade we can do it one day. haha

[reptiletan]

hello people!! hows the outing list??? fill up ur names yet?? haha!

[reptiletan]

X1R Meet Up Talk C0ck Session

 

http://i113.photobucket.com/albums/n204/reptiletan/yamaha-x1r-front-lamp.jpg

 

Date: 13th August 2010

Day: Friday

Time: 7pm

Location: Jalan Kayu

Itinerary-

 

7pm- meet up at Jalan Kayu for makan (Open for suggestion)

9pm- Proceed for rounding and slacking (Open for suggestion)

11pm- Supper!(locations to be confirm)

 

 

Attending-

 

1. turtle/ 91179738

2. Jwylong 90902407

3. Jordan 93895389

4.

5.

 

 

Not Attending-

 

1.

2.

3.

 

if u cannot make it at 7pm but can come in at a later time, just drop me a msg so that i can keep u updated.. turtle- 9 1 1 7 9 7 3 8

[Kuyo]

eh koyote are you using racing boy 8 spoke sport rim, white with chrome sides?

 

i am using racing boy 8 spoke sport rim, black. haha kinda regret not taking the white one.

 

maybe if u wan trade we can do it one day. haha

 

sry bro i dont think possible to trade >.

cause my rim size diff from the normal one.

my back rim 2.50 hahaha put tire on 110/70

[Kuyo]

so which means after drilling...its not possible to revert to how it was?

 

hmm not sure ar bro, mayb can check with your mech ?

[Blahhh]

good info there:thumb: wondering if can down fork and put fork brace, does it make any sense?

 

should be can la.. saw a few x1r's with downed forks with braces installed..

 

I read in other parts of this forum, some ppl suggest to clean the chain with diesel/kerosene, and then spray chain lube on a warm chain (some suggesting motorex chain lube from mah motosports) and leave it to stay for the night. But I'm not sure whther it is for X1-r too.

 

That method is very troublesome, no? Somemore diesel/kerosene just smells bad. A degreaser is enough, get those that comes in a can.

 

how to do it -.- they just help me tighten than spray some oil over the chain

dont know correct oil or not, they tell me cooking oil also can use ?

than also, any way to after oil -ing the chain got anything can use to prevent the bloody oil

from splashing onto the rims ma ? mine white rims oil 3 times all 3 times dirty

damn sian, infront clean rear wheels dirty.

 

Typical motordiam method.. just wipe or spray used oil on the chain. This is not a good method, ur chains are not lubricated at all. Should use chainlube lah, it will stick to the chain and won't fling out. Just put some newspaper and cover the rims when you spray..

 

my back rim 2.50 hahaha put tire on 110/70

 

110/70? Whoa, so thick cornering must be shiok?

[Kuyo]

should be can la.. saw a few x1r's with downed forks with braces installed..

 

 

 

That method is very troublesome, no? Somemore diesel/kerosene just smells bad. A degreaser is enough, get those that comes in a can.

 

 

 

Typical motordiam method.. just wipe or spray used oil on the chain. This is not a good method, ur chains are not lubricated at all. Should use chainlube lah, it will stick to the chain and won't fling out. Just put some newspaper and cover the rims when you spray..

 

 

 

110/70? Whoa, so thick cornering must be shiok?

 

dont mind next time meet up le teach teach me abit ar =/

i super suck at DIY stuff lol.

 

yup cornering and stability is SHIOK

but also comes with a price, more heavy & top end suffer. (if your bike stock like mine )

[Kuyo]

hey guys it may be a stupid question

but just wanna ask and know if guys that are using gpr 1st gen pipe

do u all take out the silencer ? or do any mod to it making it louder?

[reptiletan]

morning folks.. boring monday....

[toygraff]

hey guys!.. i just bought x1r last month and now i searching for pipe for u guys which one do u prefer? yoshi tri oval or gpr old version? whts the diff anyways

HELP ME OUT BROS IM NEW!

[GrandmasteR]

should be can la.. saw a few x1r's with downed forks with braces installed..

 

 

 

That method is very troublesome, no? Somemore diesel/kerosene just smells bad. A degreaser is enough, get those that comes in a can.

 

 

 

Typical motordiam method.. just wipe or spray used oil on the chain. This is not a good method, ur chains are not lubricated at all. Should use chainlube lah, it will stick to the chain and won't fling out. Just put some newspaper and cover the rims when you spray..

 

 

110/70? Whoa, so thick cornering must be shiok?

 

yeah it is troublesome.. i'll try another method. this time i'll use GT85 teflon spray to clean up the chain, then go for a 15min ride around my neighbourhood to warm up the chain, and then lube the chain with maxima chain guard. do u think it is a good idea?

 

@koyote

motodiam liddat one.they anyhow lube ur chain, so that ur chain spoil u have to buy new chain from them. damn idiots. thats why i'm trying to learn simple diy stuff. the chain is an important part of the bike other than the engine.

[GrandmasteR]

hey guys!.. i just bought x1r last month and now i searching for pipe for u guys which one do u prefer? yoshi tri oval or gpr old version? whts the diff anyways

HELP ME OUT BROS IM NEW!

 

i don't know about yoshi, but i'm using leo vince. i like the loud sound. make me high.