[Group] SBF Yamaha X-1r 135

[Forhod]

Ur bike too powerful la.. Lolx!!

Confirm nvr big bore meh..

I feel like testing ur bike sia..

 

Why not? Can let me know more about my bike. Big bore or not I dunno, since we can see from outside.

 

early in the morning jus now my mum wake me up and says my bike felldown..

i see outside the window and i was like knncbb!! straight away go down carry up my bike( wah x1r quite heavy too uhh..haahaa)

the first thing i check is my yoshi pipe siols! lucky no dent!! jus a minor scratch on my coverset and the bottom of the pipe..

****ing hell..early in the morning pissed me off..!!

 

Damn a** for such an act. Hopefully is not an intentional sabo..

[Zack83]

Why not? Can let me know more about my bike. Big bore or not I dunno, since we can see from outside.

 

Can hear and feel..

 

Kip a lookout for the thread..

 

Outing coming up soon!

[Joe18]

U didn't know meh..

There was strong winds this morning at Jurong..

Only jurong..

 

 

 

 

 

 

 

 

 

 

Wahahahahahhaa!!!!

Must be u revving too loud huh..

 

haha..where got strong wind siaa.at the lot only my bike yang jatuh..

aiyaa..gona kick tat person in da ass siaaa..!! cheeseeebunnss..

[Joe18]

on main stand still can fall ??? meaning got pple disturb already luh

 

yaalorr..i tink ppl disturb..coz i see at the side of my seat got the mark like ppl kick like tat...

[Flo_rider]

I just replaced my grips to ones that looks like the silver Rizoma grips (not sure if original) from some ahpek shop near my place.

Somemore the balancer like very loose after installed and the uncle have to use penknife cut away some of the throttle rubber to fit the grip into the throttle.

 

$22, I assume kena carrot alrdy right?

 

$28 total for replacing brake fluid and tighten chain.

[U-Nic]

I just replaced my grips to ones that looks like the silver Rizoma grips (not sure if original) from some ahpek shop near my place.

Somemore the balancer like very loose after installed and the uncle have to use penknife cut away some of the throttle rubber to fit the grip into the throttle.

 

$22, I assume kena carrot alrdy right?

 

$28 total for replacing brake fluid and tighten chain.

 

Some grips needa be cut shorter to fit into the throttle if not the balancer can't fit in. Balancer that moves is normal. Price wise, i don't know if you got chopped. Chill bro

[U-Nic]

double post (:

[Flo_rider]

I dunno man cuz when I turn the throttle it seems to twist with my hand abit (especially nearer to the edge) before opening the throttle.

 

Dunno if u understand what i mean... I think have to try for yrself then u know...

Edited April 23, 2011 by Flo_rider

[Uniquely Ayid]

; Hello! Where's a shop tt spray paint rims? 2 Tone Colour. Thankiew~

[rand0mc0nnecti0n]

Have you guys ever heard a whirring sound when you engine brake?? Isit clutch plate problem? Also its always hard to put my bike into 2nd gear from 1st.. Most of the time it goes to neutral no matter what way i kick it, isit the clutch? I tighten the clutch cable and changed my chain, and still the problem is there..

[chinhuahaw]

Have you guys ever heard a whirring sound when you engine brake?? Isit clutch plate problem? Also its always hard to put my bike into 2nd gear from 1st.. Most of the time it goes to neutral no matter what way i kick it, isit the clutch? I tighten the clutch cable and changed my chain, and still the problem is there..

 

hmmmm u mean tighten the chain change the clutch cable ????

does your bike moves when it is in gear 1 ??

[chinhuahaw]

guys any recommanded place to get yoshi pipe ??? looking for TRI OVAL one,

[Forhod]

Yo, my tires are due for change. Can anyone recommend me their usual place for good prices tires? Also what brands? Currently using Battlax tyres, the new tyres must be on par or even better.

 

Also do WS accept tyre trade in? My front tyre is less than 1 month old and only running less than 1000km.

 

TIA!

[rand0mc0nnecti0n]

hmmmm u mean tighten the chain change the clutch cable ????

does your bike moves when it is in gear 1 ??

 

Gear 1? Yea, When i throttle it moves as normal.. It's when i change gear to Gear 2 that it always slips to neutral.. I tighten the clutch cable where it meets the engine...?? And i changed my chain...

Edited April 23, 2011 by rand0mc0nnecti0n

[chinhuahaw]

Gear 1? Yea, When i throttle it moves as normal.. It's when i change gear to Gear 2 that it always slips to neutral.. I tighten the clutch cable where it means the engine...?? And i changed my chain...

 

sry sry just now typo, does ur bike moves when u are at gear 1 clutched in ~~~ slip to neutral quite adnormal eh, we all is alway slip to gear 2 and back to gear 1 cannot find neutral

[xue ling]

Sis, your FC so good? I also mostly on 100-110km/h and only getting 28km/l...

 

i nvr do any performance mod to my bike. everything is stock except for exhaust

 

woot ! you seems to know alot abt bike , might need your opinion at times

 

mostly is learn from friends. i'll try to help if i can

[Hazlan89]

Hello ppl.. I'm looking for x1r standard footrest.. As in entire set except the pillion footrest.. Ani1 here care to sell me cheap2..

[rand0mc0nnecti0n]

sry sry just now typo, does ur bike moves when u are at gear 1 clutched in ~~~ slip to neutral quite adnormal eh, we all is alway slip to gear 2 and back to gear 1 cannot find neutral

 

its like hard going to gear 2.. ALmost always will go neutral.. And the whirring sound when i engine brake is also worrying..

[FisherPrice]

At traffic light when u stop gear 1 and clutch in, the bike move anot? Got change clutch cable recently? Tighten it prolly. Or u tighten the opposite way...

[chinhuahaw]

hi hi guys any recommanded place to get yoshi pipe ??? looking for TRI OVAL one,

searched TEAM HKL, unique all no stock,

[vtec88]

Hi All Bros,

Heard Of BROQUET Fuel Charger?

 

1. Want more Extra Mileage from your Fuel?

2. Dyno Run shows an increase of HP after installation of BROQUET (check out my DYNO chart)

 

Check out my CMO thread -- >

 

http://www.singaporebikes.com/forums/showthread.php/235030-lt-CMO-gt-BROQUET-Fuel-Charger-%28UK%29-NEW-%28Torque-Top%29-DUAL-MODE-SELECTOR-Voltage-Stablize/page22

 

Tested and proven with Yamaha Spark 135 BROQUET User Review!

 

YAMAHA Spark 135 BROQUET USER REVIEW

 

thanks derek.. i am that guy whom bought from u previously.. ming..riding sparks 135rr..

 

ya.. this miracle semi-circular looking magnets in the net helps much alot compare then once i drop it in my fuel tank.. easy and definitely worth the price..

 

my fc was like 30-35 km/litre usage (due to modification of cdi and etc...)

now my fc stay ard 45-50 km/litre ~!~ really save alot more~~~

 

and was given with warranty card from the seller..

and definitely the seller is a friendly guy~~

 

what's more u can ask for?

[U-Nic]

hi hi guys any recommanded place to get yoshi pipe ??? looking for TRI OVAL one,

searched TEAM HKL, unique all no stock,

 

Try Motoworld? Can call them to check out price before heading down bro.

 

Website: http://www.motoworld.com.sg/

 

Phone: 6844 0792

 

Address: KB Industrial Building

10 Kaki Bukit Rd 1 #01-08

Singapore 416175

 

Operating Hours: Mon to Sat: 10am to 8pm

Closed on Sun and P.Holidays

[chinhuahaw]

Try Motoworld? Can call them to check out price before heading down bro.

 

Website: http://www.motoworld.com.sg/

 

Phone: 6844 0792

 

Address: KB Industrial Building

10 Kaki Bukit Rd 1 #01-08

Singapore 416175

 

Operating Hours: Mon to Sat: 10am to 8pm

Closed on Sun and P.Holidays

 

ya they told me is the distributor (motoworld) that is out of stock eh tml i gotta call them already

[U-Nic]

ya they told me is the distributor (motoworld) that is out of stock eh tml i gotta call them already

 

Alright, remember to ask them whens the next batch of stock thats coming in. If it takes too long, i can help you keep a look out.

Wing yap should have stock, but you gotta check the price out 1st.

[rand0mc0nnecti0n]

At traffic light when u stop gear 1 and clutch in, the bike move anot? Got change clutch cable recently? Tighten it prolly. Or u tighten the opposite way...

 

Stop gear 1 clutch in, never move, just tighten clutch cable, didnt loosen it..