[Group] SBF Yamaha 125Z

[uma-man]

if u got to know the price do pm me too yar =)

 

thinking of spraying my bodyframe too.

 

but i dun think it wud be cheap coz the whole engine muz be taken out first rite?

 

be like pauzi ah...spray the can see frame only..like the footrest part...hehe! ya lah..pauzi log time nvr post..where he menghilang?

[Hazlan89]

what kind of standard mods u all refering to ah?..

 

tong exhaust stomach?..

 

Itz not really necessary to mod pipe.. Standard mod is like u port ur block, use bigger piston, change to rxz carb.. If it still not enuf, change to tzm or krr carb lar.. Other parts let it b standard.. Standard parts are always the bez.. It will b gr8 if u managed to find yr '00 to '01 125z model original japan cdi.. No power cut.. This cdi is really rare item and every1 is hunting for it.. Haha.. This is my understanding of standard mod.. Not sure abt the rest lar.. Hehe..

[Browned]

Hi There To all Broz..!! I'm A Newbie..!! Been following on this thread from the time I set my eyes on a 125z..!!

Mean no offence..!! But cud anione help me out with my 125z..!!

I just got a fully stock 125z and have been trying the bike..!!

My top speed is at 140-150kmh at rpm 8-9k...!!

Hw do i increase that..!? Dun mean to be flying..!! But all i wanna do is to smoke a friend's RX-Z..!

Any helpful suggestions..!!?

 

- b R o W n -

[Hazlan89]

Hi There To all Broz..!! I'm A Newbie..!! Been following on this thread from the time I set my eyes on a 125z..!!

Mean no offence..!! But cud anione help me out with my 125z..!!

I just got a fully stock 125z and have been trying the bike..!!

My top speed is at 140-150kmh at rpm 8-9k...!!

Hw do i increase that..!? Dun mean to be flying..!! But all i wanna do is to smoke a friend's RX-Z..!

Any helpful suggestions..!!?

 

- b R o W n -

 

My suggestion, juz 2 simple stuff to change.. Use smaller spocket size 36 to 38(depends on rider taste), change to rxz carb.. Settle.. Haha..

[Browned]

My suggestion, juz 2 simple stuff to change.. Use smaller spocket size 36 to 38(depends on rider taste), change to rxz carb.. Settle.. Haha..

 

Does it Improve my speed..!!? And yeah..!! Hw much is the rx-z carb roughly..!? Also.. Sprocket.. What is the best to use..!! Front and back..!? These 2 changes is enough to clear my rpm and meter..!?

[Hazlan89]

Does it Improve my speed..!!? And yeah..!! Hw much is the rx-z carb roughly..!? Also.. Sprocket.. What is the best to use..!! Front and back..!? These 2 changes is enough to clear my rpm and meter..!?

 

Yes. It does.. Not until clear meter lar.. Improve ur speed by at least can reach 160 to 170.. Clear meter need to mod engine abit.. Not sure how much rxz carb cost.. Shud b arnd below $80 if u buy at scrapyard.. Best sprocket to use 15(f) - 37®..

[Browned]

Well..!! Sure ting then..!! I shall make the changes and let all the peepz here know of my upgrading..!! Aniwaes..!! In terms of engine mod..!! What mods do i have to make to attain the best performance..!!?

[uma-man]

Well..!! Sure ting then..!! I shall make the changes and let all the peepz here know of my upgrading..!! Aniwaes..!! In terms of engine mod..!! What mods do i have to make to attain the best performance..!!?

best perfomance is standard... best racing performance aloot of money to invest tho... i think ur carb need to set...i believe our standard bike could easily run at 150-160..i think lah..coz mine standard is 160...thats 17inch rim with damn heavy tyre...i did not got get a chance to test to the limit my 18inch sotong rims... guess wana take this holiday chance to change asap.. good luck on ur mod... anything u do,dun get caught.haha

[savo]

sighness.....want to mod also...but no time and no money ah! saman never ending.................

[CoStar]

anyone here knows where i can get stock pipe or selling one? check at ahboy for ori is $200 and local $50. i don trust local one though. need it for inspection.

Thanks for your inputs!

[bustop]

Itz not really necessary to mod pipe.. Standard mod is like u port ur block, use bigger piston, change to rxz carb.. If it still not enuf, change to tzm or krr carb lar.. Other parts let it b standard.. Standard parts are always the bez.. It will b gr8 if u managed to find yr '00 to '01 125z model original japan cdi.. No power cut.. This cdi is really rare item and every1 is hunting for it.. Haha.. This is my understanding of standard mod.. Not sure abt the rest lar.. Hehe..

 

 

wa ur standard mod port block alrdy ah..

 

My suggestion, juz 2 simple stuff to change.. Use smaller spocket size 36 to 38(depends on rider taste), change to rxz carb.. Settle.. Haha..

 

im using 38r.. quite sui for 66kg rider..

 

bnyk 125z pakai rxz carb eh

[uma-man]

anyone here knows where i can get stock pipe or selling one? check at ahboy for ori is $200 and local $50. i don trust local one though. need it for inspection.

Thanks for your inputs!

 

go ask the bike shop and if have check the pipe if got mod.. most prob many bike shop have lah pipe..

[Browned]

best perfomance is standard... best racing performance aloot of money to invest tho... i think ur carb need to set...i believe our standard bike could easily run at 150-160..i think lah..coz mine standard is 160...thats 17inch rim with damn heavy tyre...i did not got get a chance to test to the limit my 18inch sotong rims... guess wana take this holiday chance to change asap.. good luck on ur mod... anything u do,dun get caught.haha

 

Well..!! I'm Planning on this few changes this mth..!!

Change sprocket to 15-37..

Change piston and block to racing ones..

And change carb to rx-z carb..

 

I hope i dunt blow up..!! LOL..!! But i wanna play ard with possibilities since i'm new..!! Besides..!! Its a waste if we dunt try the little devils ryte..!?

 

Aniwaes.. Anione know of ani good workshop ard cck area..!? Just shifted here.. I'm feeling too far to head baq to yish..!! Ani idea ard here..!? Thnx in advanced..!!

[Sprinta03]

Well..!! I'm Planning on this few changes this mth..!!

Change sprocket to 15-37..

Change piston and block to racing ones..

And change carb to rx-z carb..

 

I hope i dunt blow up..!! LOL..!! But i wanna play ard with possibilities since i'm new..!! Besides..!! Its a waste if we dunt try the little devils ryte..!?

 

Aniwaes.. Anione know of ani good workshop ard cck area..!? Just shifted here.. I'm feeling too far to head baq to yish..!! Ani idea ard here..!? Thnx in advanced..!!

 

 

 

 

WAH CHANGE RACING BLOCK??HAHA-

 

WONT LAST LA BRADDER-

 

STANDARD BLOCK OK LIAO-JUST PORT:thumb:

 

 

IF U WANT PUT TZM ENGINE OSO CAN-

[Browned]

WAH CHANGE RACING BLOCK??HAHA-

 

WONT LAST LA BRADDER-

 

STANDARD BLOCK OK LIAO-JUST PORT:thumb:

 

 

IF U WANT PUT TZM ENGINE OSO CAN-

 

Why wunt last ar..!? And yeah.. Hmm..!! Usually hw much is the racing block going out for bro..!? Aniwaes.. Port block hw much ar..?

[Sprinta03]

Why wunt last ar..!? And yeah.. Hmm..!! Usually hw much is the racing block going out for bro..!? Aniwaes.. Port block hw much ar..?

 

 

 

RACING STUFF HOW TO LAST FOR UR EVERYDAY USE-

 

COS THE WORD RACING MEANS FOR RACING MAH-NOT EVERDAY USE PURPOSE-

 

 

PORT BLOCK= DIFF SHOP DIFF PRICES-

 

SO LETS ASK THE ABANG2 WHO FREQUENT J.B......

 

PERILOUS,HAZLAN COMMENTS PLEASE:angel:

[Browned]

RACING STUFF HOW TO LAST FOR UR EVERYDAY USE-

 

COS THE WORD RACING MEANS FOR RACING MAH-NOT EVERDAY USE PURPOSE-

 

 

PORT BLOCK= DIFF SHOP DIFF PRICES-

 

SO LETS ASK THE ABANG2 WHO FREQUENT J.B......

 

PERILOUS,HAZLAN COMMENTS PLEASE:angel:

 

i see i see..!!! aite..!!! the abg abg..! tolong a lil..!! newbie in crisis..!! thx..!!!

[h4hahak1m]

Haha. Porting can go some sg shops. They do a better shop. Most jb shops port through trial and error.

[Browned]

Hey peep.. Just made small changes to my bike.. Changed sprocket frm 15-40.. to 15-37.. And yeah though took off my pick up.. It increased my stock bike speed to 160kmh.. Have no idea why can't go further.. But still working on changing my carb nxt wk.. Then ONI planning to work on engine.. Hope by then atleast I can clear my meters.. Hope alls well.. All bros hu aldy have done their engine mod.. Plz do comment.. Thanx.. Suggestions wld be awesome..

[cyrusv]

My Top is 170km/hr.. At 140km/hr, the Vibration on my coverset beside the engine is damn strong(Last tyme isnt like tis)..

Also wen i rev(Blow) my bike, there seem to b a strong vibrating sound wen the rev goes down..

 

Check Out My Edited Tagged Account . . Its actually my Personal Profile but its getting too quiet since i'm more active in FB so i change it to 125Z Club Profile.. Click Here . .

 

Hey bro found your problem? would really appreciate it if you can share what is the problem since i am also facing this problem.....

 

Hey peep.. Just made small changes to my bike.. Changed sprocket frm 15-40.. to 15-37.. And yeah though took off my pick up.. It increased my stock bike speed to 160kmh.. Have no idea why can't go further.. But still working on changing my carb nxt wk.. Then ONI planning to work on engine.. Hope by then atleast I can clear my meters.. Hope alls well.. All bros hu aldy have done their engine mod.. Plz do comment.. Thanx.. Suggestions wld be awesome..

 

Bro you can try to clear your meter but please be careful on the road..... my best wishes for you. =)

[uma-man]

im bored ah this few coming week..wana go out but lazy...haha! FUGGING boring siaaaaaaaaaaaaaaaaaaaaaaal.....

[d0csu]

parting with my 125z. any frens interested pls contact me at 91739484.

http://www.singaporebikes.com/forums/showthread.php?p=6053769#post6053769

[Browned]

Hey peepz...!! I suppose i had a great buy today..!! Managed to get spoke rim as a set with spoke and hub and also 2 new viva tires at 200rm..!! In the process of working the bike out still..!! also planning to get ahm pipe for rm 130..!!! Hope its worth it.!! Take Care peepz..!!!

[bustop]

parting with my 125z. any frens interested pls contact me at 91739484.

http://www.singaporebikes.com/forums/showthread.php?p=6053769#post6053769

 

docsu so long nvr c u.. dua gu alrdy ah..

[knucklehead]

guys i need a favour .

 

do xanchi still hangs out with you guys ?

if yes, can help me tell him to return me what he OWE .

i dont wanna make things big but its taking bloody too long. thanks.