Yamaha TZM 150 Riders

[RedHare]

Originally posted by tzmm@Nov 2 2004, 11:30 PM

kana b4....my prob is due 2 petrol. feul tap if u take out the intake stray thing dirty....but 4 ur case,me not sure,can try give a check....

My bike now in bike shop le.... sian got to take buses. I told them to change a new piston for me. Never wan to try again... U also riding M ?? Got pic???

[HondaYamaha]

Originally posted by sKyVodKa@Nov 2 2004, 11:33 PM

My bike now in bike shop le.... sian got to take buses. I told them to change a new piston for me. Never wan to try again... U also riding M ?? Got pic???

no pic lah...sori.yah me riding M. but ah tell u seriously dun mod ur bike....use standart better,not much prob.now me slowly changin everytin back 2 standart.of course top ond lose lah,but if git rinht settinn can go up 2 210.[tzm meter]tested n proven...try wif my frien M b4.only must know how 2 play lah...but better dun always redline lah....got money than can,....but also dangerous..

[HondaYamaha]

Originally posted by Terrible One@Nov 2 2004, 07:34 PM

wat CDI u using??most prob is the carb..might need to do carb tuning..if u using non-original CDI I can lend u mine to try and see wat happens..wha u everytime drag till 11k ar..so fierce..anyway jus gimme a call if u need help..i'm jus 2 blocks away

i belie u re the thread opener right? been followin this thread 4 sum time liow,but never post only...but nowadays y this thread seems kind of slowly dead already ah?

[RedHare]

Originally posted by tzmm@Nov 2 2004, 11:42 PM

no pic lah...sori.yah me riding M. but ah tell u seriously dun mod ur bike....use standart better,not much prob.now me slowly changin everytin back 2 standart.of course top ond lose lah,but if git rinht settinn can go up 2 210.[tzm meter]tested n proven...try wif my frien M b4.only must know how 2 play lah...but better dun always redline lah....got money than can,....but also dangerous..

Ya thanks... I was scard to hell man that night

Dunno when there be a gathering again le hor teribble one ????

[HondaYamaha]

Originally posted by sKyVodKa@Nov 2 2004, 11:46 PM

Ya thanks... I was scard to hell man that night

Dunno when there be a gathering again le hor teribble one ????

got pic of ur M? post leh

[RedHare]

Originally posted by tzmm@Nov 2 2004, 11:46 PM

i belie u re the thread opener right? been followin this thread 4 sum time liow,but never post only...but nowadays y this thread seems kind of slowly dead already ah?

Nope.

[RedHare]

Originally posted by tzmm@Nov 2 2004, 11:48 PM

got pic of ur M? post leh

I never take picture of my bike. I'm a newbie also new to M. Like M cos it's big n ppl says M is fast:cheer:

[HondaYamaha]

Originally posted by sKyVodKa@Nov 2 2004, 11:50 PM

I never take picture of my bike. I'm a newbie also new to M. Like M cos it's big n ppl says M is fast:cheer:

juz pass ah?then dun go so fast lah....danger.go step by step.if repair bike,better go wif ur friend,if not wait kena chop 1. M is also not that fast....same as sp n kr...get the right setting n improve riding skill 1st,then u ride wat bike also fast....serious....last time jus pass me also think my bike not fast as others,but now than noe....riding skills do matter....

[RedHare]

Originally posted by tzmm@Nov 3 2004, 12:03 AM

juz pass ah?then dun go so fast lah....danger.go step by step.if repair bike,better go wif ur friend,if not wait kena chop 1. M is also not that fast....same as sp n kr...get the right setting n improve riding skill 1st,then u ride wat bike also fast....serious....last time jus pass me also think my bike not fast as others,but now than noe....riding skills do matter....

Ya thanks pal... I already learn my lesson... Yup just pass not long ago neh.

Anyway after changing a new piston how much must i run it. My mech say 500 will do. Do u think that's too little???

[HondaYamaha]

Originally posted by sKyVodKa@Nov 3 2004, 12:11 AM

Ya thanks pal... I already learn my lesson... Yup just pass not long ago neh.

Anyway after changing a new piston how much must i run it. My mech say 500 will do. Do u think that's too little???

me never chage piston be4...tink must ask ur friend liou....lastime overhaul change conrod all 2 time overhaul me run in 1500.the mech say 100-1200 can liou...but hey...its my bikemust take care.remember 2 change oil.

[hohosaint]

Originally posted by sKyVodKa@Nov 3 2004, 12:11 AM

Ya thanks pal... I already learn my lesson... Yup just pass not long ago neh.

Anyway after changing a new piston how much must i run it. My mech say 500 will do. Do u think that's too little???

Run in 1.5K to 2K... Use semi-syth... After run in, use ful-syth. Try go as slow as possible... Don't ram during new adaption.

[hohosaint]

Originally posted by sKyVodKa@Nov 2 2004, 11:24 PM

Hi guy... My piston seize when 2nd link with my friends on last friday... idiot say wan to go there just for petrol n supper knn end up speeding so i was left behind n lost. U turn back wanted to try my top. when all the way to 190/km closed my throttle abit end up wobbling. KNN I ALMOST GOT MYSELF KILL!!! Go back bike shop got a good scolding by my mech... Now then i know must blow abit before closing thottle at high speed... There goes my piston n lucky never jam....

 

Guys how much is a org piston anyway... ???

Hundred plus for a piston... block two hundred plus... maybe would like to call up auto-cycle to counter check the price.

[hohosaint]

Originally posted by sKyVodKa@Nov 2 2004, 11:33 PM

My bike now in bike shop le.... sian got to take buses. I told them to change a new piston for me. Never wan to try again... U also riding M ?? Got pic???

Where you're staying at and where's that workshop located at?

[-PGMIV-]

Originally posted by Terrible One@Oct 30 2004, 09:45 PM

i smell RVF coming soon

haha...neh...not going for RVF...but if i going to change 2a bike..i think i will go 4 CBR(L or N modle)mayb onli...i also will look out for PGM4:)

sorry guys...never call u all out last week..coz kind of busy...but next week i will b free!!erm...dunno hw u guys..

TZM GETHERING:

DATE:TUESDAY(9/11/04)

LOCATION:KALLANG KFC??

TIME:9pm

Purpose of this TZM GETHERING:To know more friends riding the same bike as yours,to know more knowledge frm others...not to challenge each other bike..all r welcom..even not TZM rider:)...bt if some1 wan to challenge...mayb can set a time or date or location....find THE ONE N ONLY...THE TERRIBLE ONE...wahaha..joking lar hor...also can find NIZAM..haha:cheeky:

[shahtzm]

Originally posted by sKyVodKa@Nov 2 2004, 11:24 PM

Guys how much is a org piston anyway... ???

I changed mine for $90 + the piston ring.. Not sure if its on the high side...

[RedHare]

Originally posted by hohosaint@Nov 3 2004, 08:55 AM

Where you're staying at and where's that workshop located at?

Oh I stay at Kallang n my bike is at Tampines.

They also says the piston cost $80+

Anyway going to collect back tmr le but sian got to run in again...

[nocturnized]

Originally posted by hohosaint@Nov 3 2004, 08:47 AM

Hundred plus for a piston... block two hundred plus... maybe would like to call up auto-cycle to counter check the price.

u think my problem is the fuel tap ? i also dono leh. Anyway i'm using the original CDI, with the power cut i presume.

 

for the block u quote it as two hundred plus for a block ? sure not ? so cheap meh... i was expecting it to be aroound five hundred plus ? somebody pls correct me ! haha

[hohosaint]

Originally posted by nocturnized@Nov 4 2004, 01:01 AM

u think my problem is the fuel tap ? i also dono leh. Anyway i'm using the original CDI, with the power cut i presume.

 

for the block u quote it as two hundred plus for a block ? sure not ? so cheap meh... i was expecting it to be aroound five hundred plus ? somebody pls correct me ! haha

I'll help you call up auto-cycle to check on the block as for the rest of guys saying piston cost about 80~90??? How can that be??? Maybe I'll call up them to counter check the price...

[hohosaint]

Just called up three hundred plus supposed to be made in Japan... If two hundred plus, should be Malaysia or Thailand liao wor.

 

But currently autocycle has no stock.

[shahtzm]

Originally posted by hohosaint@Nov 4 2004, 10:01 AM

Just called up three hundred plus supposed to be made in Japan... If two hundred plus, should be Malaysia or Thailand liao wor.

 

But currently autocycle has no stock.

wah so ex meh? Mine also from Japan le... I checked the packaging.. Its is confirmed the original Yamaha genuine parts...

[hohosaint]

Originally posted by shahtzm@Nov 4 2004, 11:15 AM

wah so ex meh? Mine also from Japan le... I checked the packaging.. Its is confirmed the original Yamaha genuine parts...

Sure? But anyway... Which supplier you got from? Written "Made in Japan"? Or was not shown there?

[shahtzm]

Originally posted by hohosaint@Nov 4 2004, 11:23 AM

Sure? But anyway... Which supplier you got from? Written "Made in Japan"? Or was not shown there?

Yep.. there is a print Made In Japan. I bought it from a motodiam in UBI.. i remembered cos tat time he told me tat he tot TZM from Malaysia.. how come the piston made in Japan one...

[shahtzm]

Originally posted by shahtzm@Nov 4 2004, 11:31 AM

Yep.. there is a print Made In Japan. I bought it from a motodiam in UBI.. i remembered cos tat time he told me tat he tot TZM from Malaysia.. how come the piston made in Japan one...

Maybe u can try calling Auto Machinery.. Heard the prices r quite ok..

[-tRuSt-]

Originally posted by -=|TZM|=-@Nov 3 2004, 05:00 PM

haha...neh...not going for RVF...but if i going to change 2a bike..i think i will go 4 CBR(L or N modle)mayb onli...i also will look out for PGM4:)

sorry guys...never call u all out last week..coz kind of busy...but next week i will b free!!erm...dunno hw u guys..

TZM GETHERING:

DATE:TUESDAY(9/11/04)

LOCATION:KALLANG KFC??

TIME:9pm

Purpose of this TZM GETHERING:To know more friends riding the same bike as yours,to know more knowledge frm others...not to challenge each other bike..all r welcom..even not TZM rider:)...bt if some1 wan to challenge...mayb can set a time or date or location....find THE ONE N ONLY...THE TERRIBLE ONE...wahaha..joking lar hor...also can find NIZAM..haha:cheeky:

haha...so ani1 else joinin the outing?

[hohosaint]

Originally posted by shahtzm@Nov 4 2004, 11:32 AM

Maybe u can try calling Auto Machinery.. Heard the prices r quite ok..

Thanks alot... will bear that name hardly in mind.