Yamaha TZM 150 Riders

[thatguyhaikal]

wiring.. go back to the shop that you serviced, ask them to do it without charging, just say it was working before i came here, if they want to charge or change ask them to suck ****.

[thatguyhaikal]

bros if signal lite nt werking wads e fault ehK? dis happens after servicing my bike uh...

wiring, go back to the shop that you serviced at, ask them to do it for free, if they ask to pay or change anything **** them, say it was working fine before the servicing.

[xFIE]

are u guys gonna do any tzm outing tak???

but dun mind about me coz i p plate

hehe

 

every month kite ade buat outing, pass num ah, pape nanti aku update kau

[karLorenzo]

anyone JB tonight?

[xXxAmiRxXx]

if your engine gasket i think u better change fast... because your engine oil nanti leaking... mine also same... i going to change soon... justing find time... if u want standby $100sg... go jb n do i think about 150 ringget... here n there since u overhaul already, no worries... go with me ah if u wanna change gasket... can do together...

[xXxAmiRxXx]

guys..

ader sesiape diantara kalian yg nk let go pipe tk....??

aku ngah carik pipe nk project ah...

nk project aku nyer syg...pasal standard abez...

so i need a spare pipe...kalau leh satu set....

kalau ader..juz pm aku...

 

were u the one whom sms me about my chamber..?

[anante_04]

were u the one whom sms me about my chamber..?

 

nope....y??

u got pipe to sell isit...??

[sgtfallenprince]

[okae la tu

aku pun boring gak ne

tk kisah lau g ner

janji ada outing

my number 91277487 boyan....

[sgtfallenprince]

aku ada spare

p kat kampung aku la pat kota tinggi

kedai pak lang aku

kalau kau nk december ne pn aku g sana

nk servis ngan setting m aku

the pipe price cn nego

Edited October 29, 2009 by sgtfallenprince

[sgtfallenprince]

to those of you selling your tzm to a bike shop

cn u exchange the farring with me

n the valve servo

but must test the servo first

got sangkut or not

if your selling ur m to a shop dey ll juz replace your servo with a rabak 1

n sell to ppl

price on the farring n valve servo can nego with me

Edited October 29, 2009 by sgtfallenprince

[faisaladilah]

Anyone seeling your Tzm? Want to sell your front sport rim? Can sell to me? Can contact me at 90576293 faisal

[anante_04]

aku ada spare

p kat kampung aku la pat kota tinggi

kedai pak lang aku

kalau kau nk december ne pn aku g sana

nk servis ngan setting m aku

the pipe price cn nego

 

dec lmbat sgt lah bro.....

[hElleVer]

if your engine gasket i think u better change fast... because your engine oil nanti leaking... mine also same... i going to change soon... justing find time... if u want standby $100sg... go jb n do i think about 150 ringget... here n there since u overhaul already, no worries... go with me ah if u wanna change gasket... can do together...

 

bro sorry, i just went to BM rajah to service and changed most of the parts inside, can be considered an overhaul, change my clutch plates, gears, piston, piston rings, gaskets and o rings. total damage is around 566rm, forgot to add in the valve set, because my valve rabak. But after u changed the valve, i still hear a high screeching sound when my rpm reach around 6k-7k rpm.

[compfused]

my front tyre is going finish so i going to chg my bac tyre to infront...cz the bac tyre quality is very bad...once turn sharply oso will slide...so wanna find a tyre is good for "suck floor"

If you can spend that much on 1 rear tyre the BT090 is really a good tyre..

 

bro sorry, i just went to BM rajah to service and changed most of the parts inside, can be considered an overhaul, change my clutch plates, gears, piston, piston rings, gaskets and o rings. total damage is around 566rm, forgot to add in the valve set, because my valve rabak. But after u changed the valve, i still hear a high screeching sound when my rpm reach around 6k-7k rpm.

Changed gears? The gearbox?

[hElleVer]

 

Changed gears? The gearbox?

 

no idea bro.. hehe.. not so sure bout it, its on the right hand side of the engine casing, all those gears, i dont think is gear box..

[xXxAmiRxXx]

no idea bro.. hehe.. not so sure bout it, its on the right hand side of the engine casing, all those gears, i dont think is gear box..

 

clutchplate... i just did mind yesterday clutchplate n all... wah teruk sia... i know i service earlier...

[hElleVer]

my clutch plate housing oso rabak seh.. lol.. spend close to 700rm to do up.. but eventually got a smooth bike back. worth it

[sgtfallenprince]

dec lmbat sgt lah bro.....

 

no worries

kalau kau maseh tak dapat aku maseh ada

[skyline6881]

If you can spend that much on 1 rear tyre the BT090 is really a good tyre..

 

Changed gears? The gearbox?

 

BT090 hav wat size ar??? TZM can in 140/80-17??? or 130/80-17???

[nd_danial]

BT090 hav wat size ar??? TZM can in 140/80-17??? or 130/80-17???

 

BT090 can fit TZM rear only usually size 120/60, 110/70.. and also 100/70 but quite rare and hard to get.

[compfused]

BT090 hav wat size ar??? TZM can in 140/80-17??? or 130/80-17???

You want so big in the rear for what? Want to corner baring also if your front tyre cannot be any bigger also cannot go any lower..

 

As bro nd_danial said..Those are the sizes that can fit..

[skyline6881]

If you can spend that much on 1 rear tyre the BT090 is really a good tyre..

 

Changed gears? The gearbox?

 

i checked the price of BT090 120/60-17....it is dam crazy expensive...RM320... it is d over my budget... my budget is RM150-200...maximum RM200

[faisaladilah]

Aloo..Anyone know what is wrong with the bike if the engine suddenly got screeching sound come out..

[skyline6881]

You want so big in the rear for what? Want to corner baring also if your front tyre cannot be any bigger also cannot go any lower..

 

As bro nd_danial said..Those are the sizes that can fit..

 

BT090 120/60-17 izzit the 60 is too small???? i usualy oso c 80 or 70... and any other comment for tyre...BT090 is too expensive for RM320... my budget RM150-200

[Alu Andy]

Aloo..Anyone know what is wrong with the bike if the engine suddenly got screeching sound come out..

 

wold be yr valve housing at the side... opened(loose)

or valvebrearing burst....