GSX400RR Riders

[No_regret]

Is the difference very great after the valve clearance?

[tealeaf]

Hee, I got it so cheap cos his assistant wasn't around so I help with the stripping of my bike for servicing. Now I know how to dismantle the coolant assembly on top of engine

 

think i was at pan auto, 4 doors away at from you today.

btw, u still wan the left rearset?

[Guest ZZR-Pilot]

hi fellows,i juz did full service for my bike at jb.

 

Whoa... nice exhaust you got there. Is it loud? If it is, I want one!

[IceZ]

the sound is quite okie loh not much diff,but while i test it i can feel diffence.i cannot say its the best but it gives mi more then i expected

[FieryGiX]

hEY GUYS,

Somthing bad happened to my bike. The engine oil nut got loose and fell out while i was riding along expressway. My fren shouted to me and I started to feel a lack in performance of my bike. Then I stopped and saw the pool of oil on my wheel and floor.

 

Apparently the mech during my last servicing did not tighten the nut properly.

 

How do I tell if my piston or piston ring are gone or any damages have being done. If in this case.

 

Should the motorshop compensate me? I have good opinion of this shop and I am confident that they will give me a good explanation.

 

PLease give me any inputs.

[Arcfire]

hEY GUYS,

Somthing bad happened to my bike. The engine oil nut got loose and fell out while i was riding along expressway. My fren shouted to me and I started to feel a lack in performance of my bike. Then I stopped and saw the pool of oil on my wheel and floor.

 

Apparently the mech during my last servicing did not tighten the nut properly.

 

How do I tell if my piston or piston ring are gone or any damages have being done. If in this case.

 

Should the motorshop compensate me? I have good opinion of this shop and I am confident that they will give me a good explanation.

 

PLease give me any inputs.

 

Ahhh? i tot dis happened to you some time back when u went to malaysia wif marcus they all? how come now den bring up?

[hsp_89]

Guess this should be his 2nd experience liao....

[tealeaf]

hEY GUYS,

Somthing bad happened to my bike. The engine oil nut got loose and fell out while i was riding along expressway. My fren shouted to me and I started to feel a lack in performance of my bike. Then I stopped and saw the pool of oil on my wheel and floor.

 

Apparently the mech during my last servicing did not tighten the nut properly.

 

How do I tell if my piston or piston ring are gone or any damages have being done. If in this case.

 

Should the motorshop compensate me? I have good opinion of this shop and I am confident that they will give me a good explanation.

 

PLease give me any inputs.

 

 

hard to say about the damages man, i guess mech will have to open your engine up to see.

guan hoe did it? i doubt they will compensate u if a worser scenario such as *touch wood* piston heavily scratched, block damaged etc..., the most maybe they will top up your engine oil for u for free.

[hsp_89]

Guys, can help me ask around if any of ur friends interested in my bike? The details are per below. Thanks.

 

Paintwork colour: Purple & Black

Model: RN

COE till 05 July 2012

Newly changed battery, rectifier, rider & pillion seats and DID X-Ring chain. Whole bike is still very new as paintwork is new. Everything's great except for the loose rear suspension. A new stock shock cost $450 and a 2nd one cost $150. Carry on = $146 x 15 or Full Cash $2190 as I will be forking out 2 months instalments.

Original Price = $146 x 17

 

If transfer ownership, have to do a reloan at the bike shop (Albert Bukit Merah). Need to pay up 1 month instalments($146) + my own fork out of 2 months + transfer fee($68)+ new insurance and a finance fee.

 

You can reach me at 98572810 to arrange to view the bike.

 

Click Here to view My Bike Photos

http://sg.f1.pg.photos.yahoo.com/ph/hsp_89....src=ph&.view=t

[Guest burpie]

Guys, can help me ask around if any of ur friends interested in my bike? The details are per below. Thanks.

 

Paintwork colour: Purple & Black

Model: RN

COE till 05 July 2012

Newly changed battery, rectifier, rider & pillion seats and DID X-Ring chain. Whole bike is still very new as paintwork is new. Everything's great except for the loose rear suspension. A new stock shock cost $450 and a 2nd one cost $150. Carry on = $146 x 15 or Full Cash $2190 as I will be forking out 2 months instalments.

Original Price = $146 x 17

 

If transfer ownership, have to do a reloan at the bike shop (Albert Bukit Merah). Need to pay up 1 month instalments($146) + my own fork out of 2 months + transfer fee($68)+ new insurance and a finance fee.

 

You can reach me at 98572810 to arrange to view the bike.

 

Click Here to view My Bike Photos

http://sg.f1.pg.photos.yahoo.com/ph/hsp_89/lst?.dir=/GSXR400cc+RN+Model&.src=ph&.view=t

 

 

 

 

nice paintwork there.... rather reasonable price.... will ask ard if my frens wanna change....

[Ahbrown]

hey guys... i was riding my cousin's gsxr recently.... there's some 'tek tek' sound coming from the engine... bike still running fine bt damn irritating... anyone knows wats the problem??

[hsp_89]

hey guys... i was riding my cousin's gsxr recently.... there's some 'tek tek' sound coming from the engine... bike still running fine bt damn irritating... anyone knows wats the problem??

 

issit the block?

[FieryGiX]

Engine sound caused by camchain tensioner according to Mr Han of Guan hoe. Cost $76 to replace.

 

posted some pics from yishun dam.

[FieryGiX]

Hi guys, Think my bike is in for a FRee Overhaul....

Sian..1 Silly mistake and my engine started to make funny noise.

Now my engine got knocking noise and finally jammed after I exit expressway. Think my engine is overdued.. Inside all terok and wored out...Just towed back to the shop awaiting trial...

Here are sime pic of vanster spotted at yishun dam.

[RaNcHu]

when is this outing??bo jio mi

[IceZ]

hi to all gsxr rider,u all play friendster?coz i juz register.hope can make more gsxr frds keke.my email is [email protected] feel free add mi .cheers

[No_regret]

My fuel cork got stolen today. Damn tu lan and sian. Can adjust to reserve for the time being.

[tealeaf]

maybe the screw loosened & it dropped off while riding?...

anyway i'll try to find it at the shop where i dismantled the fuel tank tomorrow.

[Guest ][ellacious]

Engine sound caused by camchain tensioner according to Mr Han of Guan hoe. Cost $76 to replace.

 

posted some pics from yishun dam.

 

 

damnz,cant see my bike

[Deathsythe]

Guys, can help me ask around if any of ur friends interested in my bike? The details are per below. Thanks.

 

Paintwork colour: Purple & Black

Model: RN

COE till 05 July 2012

Newly changed battery, rectifier, rider & pillion seats and DID X-Ring chain. Whole bike is still very new as paintwork is new. Everything's great except for the loose rear suspension. A new stock shock cost $450 and a 2nd one cost $150. Carry on = $146 x 15 or Full Cash $2190 as I will be forking out 2 months instalments.

Original Price = $146 x 17

 

If transfer ownership, have to do a reloan at the bike shop (Albert Bukit Merah). Need to pay up 1 month instalments($146) + my own fork out of 2 months + transfer fee($68)+ new insurance and a finance fee.

 

You can reach me at 98572810 to arrange to view the bike.

 

Click Here to view My Bike Photos

http://sg.f1.pg.photos.yahoo.com/ph/hsp_89/lst?.dir=/GSXR400cc+RN+Model&.src=ph&.view=t

 

Can sell the IU bracket seperately?

[Deathsythe]

Any bro going down to Seng Kwang?

I need to fabricate the IU bracket but due to lack of time.

Looking forward for bros to help me out in the fabrication.

[tealeaf]

Any bro going down to Seng Kwang?

I need to fabricate the IU bracket but due to lack of time.

Looking forward for bros to help me out in the fabrication.

 

buy from me lar :Pp i selling $5. its stainless steel made by seng kwang.

but its slightly dent after the crash but u wont really notice it unless u scrutinise it. u can view it at jurong area.

 

Or i can bring u to seng kwang some day...

[Deathsythe]

 

buy from me lar :Pp i selling $5. its stainless steel made by seng kwang.

but its slightly dent after the crash but u wont really notice it unless u scrutinise it. u can view it at jurong area.

 

Or i can bring u to seng kwang some day...

 

How bad is it? Got pics?

I don't live ner Jurong Area.

Sorry for the trouble.

[ichiro]

hi gsx user! im just got my GSX400!!! cool bike and cheeeeeeeeeeeep hope you guys can be my master in this bike...

[Guest ][ellacious]

hi gsx user! im just got my GSX400!!! cool bike and cheeeeeeeeeeeep hope you guys can be my master in this bike...

 

 

you are the Master of your own bike