[Discussion] Super Four General Enquiry Thread

[s4vtec]

anyone knows if LAB sells replacement visor for Givi A755 windshield?

[undeadsaint]

the whole assembly i think more than $100.

 

Got so ex for the original headlight??? what about those 2nd de stock headlight. any idea how much?

[aixin]

timing chain sound or it's the valve clearance...

 

Hi s4vetc, does spec3 really has timing chain?

How is the sign of due time for replacement like?

Thks

[smoothie]

Got so ex for the original headlight??? what about those 2nd de stock headlight. any idea how much?

 

today ah boy quoted me $160 for oem ver s headlight. chong aik quoted above $200

[arsonist]

where is a good shop to do tuning? hw muich u do normally ? $20 isit?

just to tune

[MiLk]

anybody knows where to get spec3 signal light cover-clear type not those orange wan.?

 

thanks

[chawanmushi]

have a OEM Spec III headlamp here. looking to trade with Spec I/II OEM headlamp plus top up of $180 Neg.. PM me

[MiLk]

anyone can help me?

[s4vtec]

anyone can help me?

 

Chong Aik confirm have.

[Vulcan]

Hi Guys,

 

I am new to the forum and new to the CB400SF. Recently purchased a used SF hyper vtec, not sure what model,looks like a spec 1, the registration says 2004.CHASSIS# NC391002264, ENGINE# NC23E2002273 How do I make sure?.

 

I have scoured the net for the owner's manual in English. Is it available anywhere?

 

How do I adjust the digital clock on the console? I tried the rubber button , but does not seem to be able to adjust.

 

My bike does not have a central stand, Does this bike come with one?. Can I buy one and fix it?

 

The Bike idles at 1500 RPM, is that correct?

 

 

Would appreciate any help.

 

Thanks.

[s4vtec]

Hi Guys,

 

I am new to the forum and new to the CB400SF. Recently purchased a used SF hyper vtec, not sure what model,looks like a spec 1, the registration says 2004.CHASSIS# NC391002264, ENGINE# NC23E2002273 How do I make sure?.

 

I have scoured the net for the owner's manual in English. Is it available anywhere?

 

How do I adjust the digital clock on the console? I tried the rubber button , but does not seem to be able to adjust.

 

My bike does not have a central stand, Does this bike come with one?. Can I buy one and fix it?

 

The Bike idles at 1500 RPM, is that correct?

 

Would appreciate any help.

 

Thanks.

 

-Can you post a picture of your bike in side view?

 

-So far, i also can't get my hands on the Hyper VTEc manual.

 

-To adjust the clock, turn on ignition key, hold both buttons for 3 sexonds, the time will start to blink, press left button to tune hour, press right button to tune minuites, after u've set correct time, turn off the ignition and its done.

 

-Hyper VTECs cannot install main stand as the main frame does not have the mounting points to install it.

 

-Idling can be tuned. depending on individual preference. my idling is at 1k rpm.

 

Cheers!

[MiLk]

Chong Aik confirm have.

 

thanks pal...shd hav call u instead of askin in forum...

[sufick]

Hi,

I im a new S4 owner. juz bot my S4SPEC3 3 weeks ago. Fx plate. from outside looks ok and engine also feels ok. but juz to check what shud i pay attention to in a 6 year old S4.hope u guys cane help me.

Thanx.

[jongos]

hi,

 

im oso new owner S4..spec2..jz wanna ask...wenever i change gear ere is sound(dunno how to describe the sound)..the sound like from neutral to gear 1 lydat..especially from 1-3..4-6 not so..u guys hv any idea wats that sound is n what cos it?..hv yet to bring it to wkshop...wanna gather some info here 1st...thks...

[dragonforce]

Hi,

I im a new S4 owner. juz bot my S4SPEC3 3 weeks ago. Fx plate. from outside looks ok and engine also feels ok. but juz to check what shud i pay attention to in a 6 year old S4.hope u guys cane help me.

Thanx.

 

probably you want to check your front forks, rear suspensioin, coolant & radiator.. and other common stuff like chain and sprocket, EO, tyres, brake pads.

 

hi,

 

im oso new owner S4..spec2..jz wanna ask...wenever i change gear ere is sound(dunno how to describe the sound)..the sound like from neutral to gear 1 lydat..especially from 1-3..4-6 not so..u guys hv any idea wats that sound is n what cos it?..hv yet to bring it to wkshop...wanna gather some info here 1st...thks...

 

is it the loud 'tack' sound?

[jongos]

probably you want to check your front forks, rear suspensioin, coolant & radiator.. and other common stuff like chain and sprocket, EO, tyres, brake pads.

 

 

 

is it the loud 'tack' sound?

 

yes....smthg lydat...double tack sound...u noe y?

smthg like..'ke-tack' 'ke-tack'...very annoying 1...

Edited December 1, 2009 by jongos

[s4vtec]

Come for the upcoming S4 monthly gathering and u can ask me all questions that you need answers.

[skyblood]

anY 1 encounter on spec 3 fuel gauge meter faulty.. cos my bike i pump until brim already .. the fuel gauge meter keep giving me only 5 bar.. where 6 bar is full

[Yusri Sach]

hello Bros,

 

juz to check with u guys, how much is a FBA plate spec 3 cost?

[ayie125z]

anY 1 encounter on spec 3 fuel gauge meter faulty.. cos my bike i pump until brim already .. the fuel gauge meter keep giving me only 5 bar.. where 6 bar is full

 

eh bro same case as mine ar... my fuel gauge bar still moving2 but my tank empty untill no petrol to move... usually if bar blinking means empty... always kana trick... now hav to depend on mileage... y arh? my gauge meter faulty uh??

[sihan0110]

eh bro same case as mine ar... my fuel gauge bar still moving2 but my tank empty untill no petrol to move... usually if bar blinking means empty... always kana trick... now hav to depend on mileage... y arh? my gauge meter faulty uh??

 

when your fuel gauge bar start to move mean go to reserve . left roughly 3L inside the tank only

[jongos]

Hi Guys,

 

I am new to the forum and new to the CB400SF. Recently purchased a used SF hyper vtec, not sure what model,looks like a spec 1, the registration says 2004.CHASSIS# NC391002264, ENGINE# NC23E2002273 How do I make sure?.

 

I have scoured the net for the owner's manual in English. Is it available anywhere?

 

How do I adjust the digital clock on the console? I tried the rubber button , but does not seem to be able to adjust.

 

My bike does not have a central stand, Does this bike come with one?. Can I buy one and fix it?

 

The Bike idles at 1500 RPM, is that correct?

 

 

Would appreciate any help.

 

Thanks.

 

 

can take a look at this manual...

 

http://campaigns.hondampe.com.au/Motorcycles/manuals/CB400-A-SA.pdf

[M_A_O]

Bro and sis in the Forums will like to check with u all has and ride this Super 4 Vtec 2 b4 FW5052A will like to ask some Qus about this bike pls Pm me if u r the Ex owner thank v much.....

[nitavroomspec3]

Hi,

 

Can you all kinda give me the information how much the price

if i want to have 2 colour for my bike..include my rims.how much

does it cost?Where the location and how long does it take?

Does the shop got the catalogue for what kinda of design?

[dragonforce]

2 colours + rims probably about $400.

there's are thread's at Why Pay More section stating the more popular paintshops.

time varies. from a few days to even a month depending on the shop.

its better for you to bring your design to the shop.