Yamaha TDM 900

[heaven51]

Double whopper burger ! On the house !

Edited July 24, 2011 by heaven51

[fx110]

FX110 will offer you 5k...

 

have ah? let me know leh

[Paikia44]

have ah? let me know leh

 

Have! In British pounds. Hehehe!!

[kmax]

http://www.xe.com/ucc/convert/?Amount=5000&From=GBP&To=SGD

 

about 9,800 SG$... not bad..

 

5,000.00 GBP = 9,852.16 SGD

[Paikia44]

http://www.xe.com/ucc/convert/?Amount=5000&From=GBP&To=SGD

 

about 9,800 SG$... not bad..

 

5,000.00 GBP = 9,852.16 SGD

 

I will even throw in the canvas and a rag!!

[kmax]

Anti vibration ROX risers..

 

35mm high and 45' laid back.

Closer to rider so arm strain is reduced and back tension will be lesser.

 

Vibrations are dampen up to 6000rpm on all gear ratio,

 

Mixed well with renthal Dakar bar like match made in heaven .

 

Longing for serious road trip again ..

 

Fwoooo ....

 

http://photos-c.ak.fbcdn.net/hphotos-ak-ash4/250276_2259759291158_1163693440_32798831_5300850_n.jpg

[heaven51]

Photo courtesy of Mac, with the new rear brake disc...

 

Swee....

 

By the how much for the labour / workmanship cost ?

 

http://i426.photobucket.com/albums/pp350/glennkoh/TDM900/7a657499.jpg

 

http://i426.photobucket.com/albums/pp350/glennkoh/TDM900/b215f938.jpg

[heaven51]

Anti vibration ROX risers..

 

35mm high and 45' laid back.

Closer to rider so arm strain is reduced and back tension will be lesser.

 

Vibrations are dampen up to 6000rpm on all gear ratio,

 

Mixed well with renthal Dakar bar like match made in heaven .

 

Longing for serious road trip again ..

 

Fwoooo ....

 

http://photos-c.ak.fbcdn.net/hphotos-ak-ash4/250276_2259759291158_1163693440_32798831_5300850_n.jpg

 

Swee.... Oh.... Remember, if you need to access the oil tank, need to adjust the riser as it gets in the way...

Edited July 26, 2011 by heaven51

[kmax]

Em, thanks Bro. But how many time do I need to access the oil tank ? Once in 3 year ownership ... Lol ..

[heaven51]

Em, thanks Bro. But how many time do I need to access the oil tank ? Once in 3 year ownership ... Lol ..

 

Good to hear that it dampen the vibration by alot... Cos mine using the 3inch version pair with Protaper Bar gives me a wide and comfortable grip. But when going at speed above 150, it numb my finger. Just like Harley...

 

So luckily... Mine with just under a year ownership, I need to access it for

1. To mod air intake

2. To change K&N air filter

3. To install Hella horn

4. To install terminal block

5. To change Thermostat gasket (O-ring) (Most recent)

 

I believe the need to do all this is due to the age of the bike, next month is her 9yrs birthday... Aging issue although her mileage is only 70k...

 

No worry if you don't DIY too often, just another 4 more nuts to loosen and tighten only. No big deal lah..

Edited July 26, 2011 by heaven51

[MAC77]

Photo courtesy of Mac, with the new rear brake disc...

 

Swee....

 

By the how much for the labour / workmanship cost ?

 

http://i426.photobucket.com/albums/pp350/glennkoh/TDM900/7a657499.jpg

 

http://i426.photobucket.com/albums/pp350/glennkoh/TDM900/b215f938.jpg

 

Hullo guys . . .

 

It cost me $20 bucks cos I fix together with my new rear brake pads .

 

How much does e rox riser cost in Sing $ including shipping ? Must we use only after market handle bar for e rox riser ?

 

For e eagle screens - any local dealer or must buy online ?

 

 

Thanxs in advance guys !

[heaven51]

How much does e rox riser cost in Sing $ including shipping ? Must we use only after market handle bar for e rox riser ?

 

The last time I google, found a seller fr eBay US is seller much cheaper than Rox Riser itself.

Ordered for Thomas and Virus last time round. If you keen give me a tinkle and I'll give you the link.

Abt $110 - $120 depend on exchange rate...

 

It can mount either on :

1. Normal bar.

2. Fat bar

3. Both normal and fat bar (comes with adapter)

 

 

The one Kmax gotten was the best/most expensive of of all with damping effect.

[gilbert]

dun feel let selling the bike when i come back to view this thread...

[gilbert]

alvin, do you send your kid to mindchamps at MBC?!

[plasticblackspecs]

don't sell, won't regret.

[kmax]

Hullo guys . . .

 

How much does e rox riser cost in Sing $ including shipping ? Must we use only after market handle bar for e rox riser ?

 

For e eagle screens - any local dealer or must buy online ?

 

ROX riser has different clamps for normal bar 7/8" or fat bar 1"

 

There are 2 types of ROX risers..

 

normal riser

 

http://www.happy-trail.com/images/misc/Rox%20Riser%20P2PP_m.jpg

 

and Anti-vibration

 

http://www.altrider.com/images/thumbnail/product_large/feature-rox-anti-vibration-elite-pivoting-handlebar-risers-2-rise-x-7-8-handlebar-clamp-x-7-8-or-1-1-8-handlebar-2.jpg

 

 

for normal riser, contact Damien, he got lobang about 120 S$ including shipping.

[kmax]

dun feel let selling the bike when i come back to view this thread...

 

i am seriously thinking to get your 850.. sell 900, transfer all bling bling accessories..

 

seriously... 5.5k is very cheap for TDM... psst... want to swap with DRZ ? hahahaha

[kmax]

don't sell, won't regret.

 

or sell high... wont regret also

[kmax]

ebay HK link

 

normal riser.

 

http://cgi.ebay.com/ebaymotors/BMW-F800GS-ABS-1-75-PIVOTING-RISER-1-1-8-1-1-8-STEM-_W0QQcmdZViewItemQQhashZitem5644346b42QQitemZ370511473474QQptZMotorcyclesQ5fPartsQ5fAccessories

 

total about US$ 100... about 120 S$ including shipping.

 

anti-vibration riser.

 

http://cgi.ebay.com/ebaymotors/ROX-SPEED-FX-RISER-ROX-2-ANTI-V-ELITE-_W0QQcmdZViewItemQQhashZitem4cf7d46cb3QQitemZ330575408307QQptZMotorcyclesQ5fPartsQ5fAccessories#ht_3046wt_877

 

about 210 S$ including shipping.

[heaven51]

Bro, do you need to adjust/change the necessary cables to accomodate to the new height of the handlebar?

 

I am now on normal bar risers with AT handlebars. I have thoughts of changing to rox risers but am concerned if the brake lines and throttle cable would be tight.

 

Do you or anyone else has any issues with that?

 

Thomas has an 2" Rox riser install... Maximum already with all cables stretchhhhh....

 

Check with him, he can install all within 5minutes...

 

I'm on 3" with Protaper Fat Bar... Same also all stretch out to the max liao...

[kmax]

Bro, do you need to adjust/change the necessary cables to accomodate to the new height of the handlebar?

 

I am now on normal bar risers with AT handlebars. I have thoughts of changing to rox risers but am concerned if the brake lines and throttle cable would be tight.

 

Do you or anyone else has any issues with that?

 

AT bar with riser will extend till the max liao..

i think Virus has rox risers with AT bar.. but he need to re-route some cables, or re-position the throttle housing.

[kmax]

since i am free, i am compiling the list for de-kit if time comes..

 

Item - "Retail Price S$" - "Selling Price" - "Reserved by"

 

Eagle tall windsheild - 170 - -- - --

GIVI medium windshield - 120 - -- - Mirza

Double Bubble Winshield - 100 - -- - --

Hepco and Becker Junior Top Box with H&B rack - 600 - -- - --

SW Motech crash bar - 300 - -- - --

SW Motech Main Stand - 300 - -- - --

Pelican side box with sengkwang rack - 940 - -- - --

(spare SW motech EVO quick release rack) - 300 - -- - --

Scott Oiler - 150 - -- - Angelo

HID high beam - 150 - -- - --

Renthal Handle bar and bar risers - 200 - -- - --

Vstorm handguards - 65 - -- - --

Barkbuster storm handguards - 180 - -- - --

Hella Super tone horns - 70 - -- - --

LED tail light - 20 - -- - Victor

Shadow digital volt meter - 50 - -- - --

12v waterproof socket - 30 - -- - --

Ventura Headlight protector - 70 - -- - --

Beowulf Radiator Guard - 100 - -- - Victor

Customized bellypan - 50 - -- - --

Scorpion carbonfibre endcans - 700 - -- - --

Hella Micro de fog lights - 180 - -- - --

Hella optilux projector lights - 60 - -- - Mirza

ROX anti-vibration risers - 200 - -- - --

Bagster Tank Bra - 150 - -- - Angelo

Bagster Minea Tank Bag - 150 - -- - Victor

K&N filter - 120 - -- - --

skidmarx front fender extender - 60 - -- - --

- - -- - --

total - 5585 - -- - --

Edited July 26, 2011 by kmax

[kmax]

check out Eagle Screen Australia..

 

open the document.. and there are our local TDM as sample photo..

 

http://www.eaglescreens.com.au/pdf/Y-72%20Export.doc

[Paikia44]

since i am free, i am compiling the list for de-kit if time comes..

 

Item - "Retail Price S$" - "Selling Price" - "Reserved by"

 

Eagle tall windsheild - 170 - -- - --

GIVI medium windshield - 120 - -- - Mirza

Double Bubble Winshield - 100 - -- - --

Hepco and Becker Junior Top Box with H&B rack - 600 - -- - --

SW Motech crash bar - 300 - -- - --

SW Motech Main Stand - 300 - -- - --

Pelican side box with sengkwang rack - 940 - -- - --

(spare SW motech EVO quick release rack) - 300 - -- - --

Scott Oiler - 150 - -- - Angelo

HID high beam - 150 - -- - --

Renthal Handle bar and bar risers - 200 - -- - --

Vstorm handguards - 65 - -- - --

Barkbuster storm handguards - 180 - -- - --

Hella Super tone horns - 70 - -- - --

LED tail light - 20 - -- - Victor

Shadow digital volt meter - 50 - -- - --

12v waterproof socket - 30 - -- - --

Ventura Headlight protector - 70 - -- - --

Beowulf Radiator Guard - 100 - -- - Victor

Customized bellypan - 50 - -- - --

Scorpion carbonfibre endcans - 700 - -- - --

Hella Micro de fog lights - 180 - -- - --

Hella optilux projector lights - 60 - -- - Mirza

ROX anti-vibration risers - 200 - -- - --

Bagster Tank Bra - 150 - -- - Angelo

Bagster Minea Tank Bag - 150 - -- - Victor

K&N filter - 120 - -- - --

skidmarx front fender extender - 60 - -- - --

- - -- - --

total - 5585 - -- - --

 

If you don't mind Bro... below are what I would be interested. But i am really a novice in some of the stuff. Can email me the pics? 10QU...

 

• Double Bubble Winshield - 100 - -- - Paikia (can see how this looks??)
  
• Pelican side box with sengkwang rack - 940 - -- - Paikia (Can don't want the SK chrome racks? )
  
• (spare SW motech EVO quick release rack) - 300 - -- - Paikia (bundle with pelican)
  
• 12v waterproof socket - 30 - -- - Paikia
  
• Customized bellypan - 50 - -- -Paikia

[kmax]

If you don't mind Bro... below are what I would be interested. But i am really a novice in some of the stuff. Can email me the pics? 10QU...

 

• Double Bubble Winshield - 100 - -- - Paikia (can see how this looks??)
  
• Pelican side box with sengkwang rack - 940 - -- - Paikia (Can don't want the SK chrome racks? )
  
• (spare SW motech EVO quick release rack) - 300 - -- - Paikia (bundle with pelican)
  
• 12v waterproof socket - 30 - -- - Paikia
  
• Customized bellypan - 50 - -- -Paikia

 

1) double bubble windshield i sell u cheap.. (give away also can) if u buy other stuff

2) Mr Barracuda wants pelican boxes and he PM me too.. judging by the time, he sent message earlier than u posted.

but i want to let go whole set leh.. with pelican + seng kwang, u buy box ,then rack alone will be wasted.

3) sw motech rack, u can take it.. then if u even buy TRAX side box, no need to buy rack anymore.

4) 12v socket, get new one lah bro... dont want to mess up the wiring to take out

5) belly pen, get new one bro.. so cheap item, i can give away also..